SRF2015 - List of Authors (Taborelli, M.)

Paper	Title	Page
TUPB027	Developments on SRF Coatings at CERN	617
	A. Sublet, S. Aull, B. Bártová, S. Calatroni, T. Richard, G.J. Rosaz, M. Taborelli, M. Therasse, W. Venturini Delsolaro, P. Zhang CERN, Geneva, Switzerland
	The thin films techniques applied to Superconducting RF (SRF) has a long history at CERN. A large panel of cavities have been coated from LEP, to LHC. For the current and future projects (HIE-ISOLDE, HL-LHC, FCC) there is a need for further higher RF-performances with focus on minimizing residual resistance Rres and maximizing quality factor Q0 of the cavities. This paper will present CERN’s developments on thin films to achieve these goals through the following main axes of research: The first one concerns the application of different coating techniques for Nb (DC-bias diode sputtering, magnetron sputtering and HiPIMS). Another approach is the investigation of alternative materials like Nb3Sn. These lines of development will be supported by a material science approach to characterize and evaluate the layer properties by means of FIB-SEM, TEM, XPS, XRD, etc. In addition a numerical tool for plasma simulation will be exploited to develop adapted coating systems and optimize the coating process, from plasma generation to thin film growth.
	Poster TUPB027 [1.070 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

TUPB051	Development of Nb3Sn Coatings by Magnetron Sputtering for SRF Cavities	691
	G.J. Rosaz, S. Calatroni, F.M. Leaux, F. Motschmann, Z. Mydlarz, M. Taborelli, W. Vollenberg CERN, Geneva, Switzerland
	Funding: The work is part of EuCARD-2, partly funded by the European Commission, GA 312453 Cost and energy savings are an integral requirement in the design of future particle accelerators. Very low losses SRF accelerating systems, together with high-efficiency cryogenics systems, have the potential of low running costs. The association to the capital cost reduction allowed by thin films coated copper cavities may represent the best overall cost-performance compromise. This strategy has been applied for instance in LEP, the LHC and HIE-ISOLDE with the niobium thin films technology. New materials must be considered to improve the quality factor of the cavities, such as Nb3Sn, which could also ideally operate at higher temperature thus allowing further energy savings. The study considers the possibility to coat a copper resonator with an Nb3Sn layer by means of magnetron sputtering using an alloyed target. We present the impact of the process parameters on the as-deposited layer stoichiometry. The latter is in good agreement with previous results reported in the literature and can be tuned by acting on the coating pressure. The effect of post-coating annealing temperature on the morphology, crystallinity and superconducting properties of the film was also investigated.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Page

Developments on SRF Coatings at CERN

617

A. Sublet, S. Aull, B. Bártová, S. Calatroni, T. Richard, G.J. Rosaz, M. Taborelli, M. Therasse, W. Venturini Delsolaro, P. Zhang
CERN, Geneva, Switzerland

The thin films techniques applied to Superconducting RF (SRF) has a long history at CERN. A large panel of cavities have been coated from LEP, to LHC. For the current and future projects (HIE-ISOLDE, HL-LHC, FCC) there is a need for further higher RF-performances with focus on minimizing residual resistance Rres and maximizing quality factor Q0 of the cavities. This paper will present CERN’s developments on thin films to achieve these goals through the following main axes of research: The first one concerns the application of different coating techniques for Nb (DC-bias diode sputtering, magnetron sputtering and HiPIMS). Another approach is the investigation of alternative materials like Nb3Sn. These lines of development will be supported by a material science approach to characterize and evaluate the layer properties by means of FIB-SEM, TEM, XPS, XRD, etc. In addition a numerical tool for plasma simulation will be exploited to develop adapted coating systems and optimize the coating process, from plasma generation to thin film growth.

Poster TUPB027 [1.070 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

TUPB051

Development of Nb3Sn Coatings by Magnetron Sputtering for SRF Cavities

691

G.J. Rosaz, S. Calatroni, F.M. Leaux, F. Motschmann, Z. Mydlarz, M. Taborelli, W. Vollenberg
CERN, Geneva, Switzerland

Funding: The work is part of EuCARD-2, partly funded by the European Commission, GA 312453
Cost and energy savings are an integral requirement in the design of future particle accelerators. Very low losses SRF accelerating systems, together with high-efficiency cryogenics systems, have the potential of low running costs. The association to the capital cost reduction allowed by thin films coated copper cavities may represent the best overall cost-performance compromise. This strategy has been applied for instance in LEP, the LHC and HIE-ISOLDE with the niobium thin films technology. New materials must be considered to improve the quality factor of the cavities, such as Nb3Sn, which could also ideally operate at higher temperature thus allowing further energy savings. The study considers the possibility to coat a copper resonator with an Nb3Sn layer by means of magnetron sputtering using an alloyed target. We present the impact of the process parameters on the as-deposited layer stoichiometry. The latter is in good agreement with previous results reported in the literature and can be tuned by acting on the coating pressure. The effect of post-coating annealing temperature on the morphology, crystallinity and superconducting properties of the film was also investigated.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)