SRF2015 - List of Authors (Nicol, T.H.)

Paper	Title	Page
TUPB074	High-Vacuum Simulations and Measurements on the SSR1 Cryomodule Beam-Line	754
	D. Passarelli, T.H. Nicol, M. Parise, L. Ristori Fermilab, Batavia, Illinois, USA
	Funding: Work supported by Fermi Research Alliance, LLC under Contract No. DEAC02- 07CH11359 with the United States Department of Energy In order to guarantee an effective cool-down process for the SSR1 cryomodule, a high-vacuum level must be achieved at room temperature in the beam-line before introducing gaseous and liquid helium. The SSR1 cavities in the beamline have a small beam aperture compared to the size of their internal volume. To avoid unnecessary complications for the vacuum piping of the cryomodule cold-mass, a pilot study was conducted on the string prior to processing and qualification of the components to investigate the vacuum level achievable by pumping only through the beam-line. To estimate the pressure distribution inside the cavity string we used a mathematical model implemented in a test-particle Monte-Carlo simulator for ultra-high-vacuum systems.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB014	Mechanical Optimization of High Beta 650 MHz Cavity for Pulse and CW Operation of PIP-II Project	1093
	T.N. Khabiboulline, I.V. Gonin, C.J. Grimm, A. Lunin, T.H. Nicol, V.P. Yakovlev Fermilab, Batavia, Illinois, USA P. Kumar RRCAT, Indore (M.P.), India
	The proposed design of the 0.8 GeV PIP-II SC Linac employs two families of 650 MHz 5-cell elliptical cavities with 2 different beta. The β=0.61 will cover the 185-500 MeV range and the β=0.92 will cover the 500-800 MeV range. In this paper we will present update of RF and mechanical design of dressed high beta cavity (β=0.92) for pulse regime of operation at 2 mA beam current. In previous CW version of PIP-II project the mechanical design was concentrated on minimization of frequency shift due to helium pressure fluctuation. In current case of pulse regime operation the main goal was Lorentz force detuning minimization. We present the scope of coupled RF-Mechanical issues and their resolution. Also detailed stress analysis of dresses cavity will be presented.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB069	Engineering Design and Prototype Fabrication of HOM Couplers for HL-LHC Crab Cavities	1279
	C. Zanoni, S. Atieh, I. Aviles Santillana, R. Calaga, O. Capatina, T. Capelli, F. Carra, P. Freijedo Menendez, M. Garlaschè, J.-M. Geisser, R. Leuxe, L. Marques Antunes Ferreira, E. Rigutto CERN, Geneva, Switzerland S.A. Belomestnykh, S. Verdú-Andrés, Q. Wu, B. P. Xiao BNL, Upton, Long Island, New York, USA G. Burt Lancaster University, Lancaster, United Kingdom S.U. De Silva, J.R. Delayen, R.G. Olave, H. Park ODU, Norfolk, Virginia, USA T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom Z. Li SLAC, Menlo Park, California, USA A.J. May, S.M. Pattalwar STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom T.H. Nicol Fermilab, Batavia, Illinois, USA A. Ratti LBNL, Berkeley, California, USA
	The High-Luminosity upgrade for the LHC relies on a set of RF Crab Cavities for reaching its goals. Two parallel concepts, the Double Quarter Wave (DQW) and the RF Dipole (RFD), are going through a comprehensive design process along with preparation of fabrication in view of extensive tests with beam in SPS. High Order Modes (HOM) couplers are critical in providing damping in RF cavities for operation in accelerators. HOM prototyping and fabrication have recently started at CERN. In this paper, an overview of the final shape is provided along with an insight in the mechanical and thermal analyses performed to validate the design of these critical components. Emphasis is also given to test campaigns, material selection, prototyping and initial fabrication that are aimed at fulfilling the highly demanding tolerances of the couplers.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB070	Design of Dressed Crab Cavities for the HL-LHC Upgrade	1284
	C. Zanoni, K. Artoos, S. Atieh, I. Aviles Santillana, J.P. Brachet, R. Calaga, O. Capatina, T. Capelli, F. Carra, L. Dassa, G. Favre, P. Freijedo Menendez, M. Garlaschè, M. Guinchard, N. Kuder, S.A.E. Langeslag, R. Leuxe, L. Prever-Loiri, G. Vandoni CERN, Geneva, Switzerland S.A. Belomestnykh, I. Ben-Zvi, S. Verdú-Andrés, Q. Wu, B. P. Xiao BNL, Upton, Long Island, New York, USA I. Ben-Zvi Stony Brook University, Stony Brook, USA G. Burt Lancaster University, Lancaster, United Kingdom S.U. De Silva, R.G. Olave, H. Park ODU, Norfolk, Virginia, USA J.R. Delayen JLab, Newport News, Virginia, USA T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom Z. Li SLAC, Menlo Park, California, USA K.B. Marinov, A.J. May, S.M. Pattalwar STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom T.H. Nicol Fermilab, Batavia, Illinois, USA A. Ratti LBNL, Berkeley, California, USA
	The HL-LHC upgrade relies on a set of RF crab cavities for reaching its goals. Two parallel concepts, the Double Quarter Wave (DQW) and the RF Dipole (RFD), are going through a comprehensive design process along with preparation of fabrication in view of extensive tests with beam in SPS. High Order Modes (HOM) couplers are critical in providing damping in RF cavities for operation in accelerators. HOM prototyping and fabrication have recently started at CERN. In this paper, an overview of the final geometry is provided along with an insight in the mechanical and thermal analyses performed to validate the design of this critical component. Emphasis is also given to material selection, prototyping, initial fabrication and test campaigns that are aimed at fulfilling the highly demanding tolerances of the couplers.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

FRBA02	Crab Cavity and Cryomodule Development for HL-LHC	1460
	F. Carra, A. Amorim Carvalho, K. Artoos, S. Atieh, I. Aviles Santillana, A.B. Boucherie, J.P. Brachet, K. Brodzinski, R. Calaga, O. Capatina, T. Capelli, L. Dassa, T. Dijoud, H.M. Durand, G. Favre, L.M.A. Ferreira, P. Freijedo Menendez, M. Garlaschè, M. Guinchard, N. Kuder, S.A.E. Langeslag, R. Leuxe, A. Macpherson, P. Minginette, E. Montesinos, F. Motschmann, C. Parente, L. Prever-Loiri, D. Pugnat, E. Rigutto, V. Rude, M. Sosin, G. Vandoni, G. Villiger, C. Zanoni CERN, Geneva, Switzerland S.A. Belomestnykh, S. Verdú-Andrés, Q. Wu, B. P. Xiao BNL, Upton, Long Island, New York, USA G. Burt Lancaster University, Lancaster, United Kingdom S.U. De Silva, J.R. Delayen, R.G. Olave, R.G. Olave, H. Park ODU, Norfolk, Virginia, USA T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom Z. Li SLAC, Menlo Park, California, USA K.B. Marinov, S.M. Pattalwar STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom T.H. Nicol Fermilab, Batavia, Illinois, USA A. Ratti LBNL, Berkeley, California, USA
	The HL-LHC project aims at increasing the LHC luminosity by a factor 10 beyond the design value. The installation of a set of RF Crab Cavities to increase bunch crossing angle is one of the key upgrades of the program. Two concepts, Double Quarter Wave (DQW) and RF Dipole (RFD) have been proposed and are being produced in parallel for test in the SPS beam before the next long shutdown of CERN accelerator’s complex. In the retained concept, two cavities are hosted in one single cryomodule, providing thermal insulation and interfacing with RF coupling, tuning, cryogenics and beam vacuum. This paper overviews the main design choices for the cryomodule and its different components, which have the goal of optimizing the structural, thermal and electro-magnetic behavior of the system, while respecting the existing constraints in terms of integration in the accelerator environment. Prototyping and testing of the most critical components, manufacturing, preparation and installation strategies are also described.
	Slides FRBA02 [4.678 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Page

High-Vacuum Simulations and Measurements on the SSR1 Cryomodule Beam-Line

754

D. Passarelli, T.H. Nicol, M. Parise, L. Ristori
Fermilab, Batavia, Illinois, USA

Funding: Work supported by Fermi Research Alliance, LLC under Contract No. DEAC02- 07CH11359 with the United States Department of Energy
In order to guarantee an effective cool-down process for the SSR1 cryomodule, a high-vacuum level must be achieved at room temperature in the beam-line before introducing gaseous and liquid helium. The SSR1 cavities in the beamline have a small beam aperture compared to the size of their internal volume. To avoid unnecessary complications for the vacuum piping of the cryomodule cold-mass, a pilot study was conducted on the string prior to processing and qualification of the components to investigate the vacuum level achievable by pumping only through the beam-line. To estimate the pressure distribution inside the cavity string we used a mathematical model implemented in a test-particle Monte-Carlo simulator for ultra-high-vacuum systems.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB014

Mechanical Optimization of High Beta 650 MHz Cavity for Pulse and CW Operation of PIP-II Project

1093

T.N. Khabiboulline, I.V. Gonin, C.J. Grimm, A. Lunin, T.H. Nicol, V.P. Yakovlev
Fermilab, Batavia, Illinois, USA
P. Kumar
RRCAT, Indore (M.P.), India

The proposed design of the 0.8 GeV PIP-II SC Linac employs two families of 650 MHz 5-cell elliptical cavities with 2 different beta. The β=0.61 will cover the 185-500 MeV range and the β=0.92 will cover the 500-800 MeV range. In this paper we will present update of RF and mechanical design of dressed high beta cavity (β=0.92) for pulse regime of operation at 2 mA beam current. In previous CW version of PIP-II project the mechanical design was concentrated on minimization of frequency shift due to helium pressure fluctuation. In current case of pulse regime operation the main goal was Lorentz force detuning minimization. We present the scope of coupled RF-Mechanical issues and their resolution. Also detailed stress analysis of dresses cavity will be presented.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB069

Engineering Design and Prototype Fabrication of HOM Couplers for HL-LHC Crab Cavities

1279

C. Zanoni, S. Atieh, I. Aviles Santillana, R. Calaga, O. Capatina, T. Capelli, F. Carra, P. Freijedo Menendez, M. Garlaschè, J.-M. Geisser, R. Leuxe, L. Marques Antunes Ferreira, E. Rigutto
CERN, Geneva, Switzerland
S.A. Belomestnykh, S. Verdú-Andrés, Q. Wu, B. P. Xiao
BNL, Upton, Long Island, New York, USA
G. Burt
Lancaster University, Lancaster, United Kingdom
S.U. De Silva, J.R. Delayen, R.G. Olave, H. Park
ODU, Norfolk, Virginia, USA
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
Z. Li
SLAC, Menlo Park, California, USA
A.J. May, S.M. Pattalwar
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
T.H. Nicol
Fermilab, Batavia, Illinois, USA
A. Ratti
LBNL, Berkeley, California, USA

The High-Luminosity upgrade for the LHC relies on a set of RF Crab Cavities for reaching its goals. Two parallel concepts, the Double Quarter Wave (DQW) and the RF Dipole (RFD), are going through a comprehensive design process along with preparation of fabrication in view of extensive tests with beam in SPS. High Order Modes (HOM) couplers are critical in providing damping in RF cavities for operation in accelerators. HOM prototyping and fabrication have recently started at CERN. In this paper, an overview of the final shape is provided along with an insight in the mechanical and thermal analyses performed to validate the design of these critical components. Emphasis is also given to test campaigns, material selection, prototyping and initial fabrication that are aimed at fulfilling the highly demanding tolerances of the couplers.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB070

Design of Dressed Crab Cavities for the HL-LHC Upgrade

1284

C. Zanoni, K. Artoos, S. Atieh, I. Aviles Santillana, J.P. Brachet, R. Calaga, O. Capatina, T. Capelli, F. Carra, L. Dassa, G. Favre, P. Freijedo Menendez, M. Garlaschè, M. Guinchard, N. Kuder, S.A.E. Langeslag, R. Leuxe, L. Prever-Loiri, G. Vandoni
CERN, Geneva, Switzerland
S.A. Belomestnykh, I. Ben-Zvi, S. Verdú-Andrés, Q. Wu, B. P. Xiao
BNL, Upton, Long Island, New York, USA
I. Ben-Zvi
Stony Brook University, Stony Brook, USA
G. Burt
Lancaster University, Lancaster, United Kingdom
S.U. De Silva, R.G. Olave, H. Park
ODU, Norfolk, Virginia, USA
J.R. Delayen
JLab, Newport News, Virginia, USA
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
Z. Li
SLAC, Menlo Park, California, USA
K.B. Marinov, A.J. May, S.M. Pattalwar
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
T.H. Nicol
Fermilab, Batavia, Illinois, USA
A. Ratti
LBNL, Berkeley, California, USA

The HL-LHC upgrade relies on a set of RF crab cavities for reaching its goals. Two parallel concepts, the Double Quarter Wave (DQW) and the RF Dipole (RFD), are going through a comprehensive design process along with preparation of fabrication in view of extensive tests with beam in SPS. High Order Modes (HOM) couplers are critical in providing damping in RF cavities for operation in accelerators. HOM prototyping and fabrication have recently started at CERN. In this paper, an overview of the final geometry is provided along with an insight in the mechanical and thermal analyses performed to validate the design of this critical component. Emphasis is also given to material selection, prototyping, initial fabrication and test campaigns that are aimed at fulfilling the highly demanding tolerances of the couplers.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

FRBA02

Crab Cavity and Cryomodule Development for HL-LHC

1460

F. Carra, A. Amorim Carvalho, K. Artoos, S. Atieh, I. Aviles Santillana, A.B. Boucherie, J.P. Brachet, K. Brodzinski, R. Calaga, O. Capatina, T. Capelli, L. Dassa, T. Dijoud, H.M. Durand, G. Favre, L.M.A. Ferreira, P. Freijedo Menendez, M. Garlaschè, M. Guinchard, N. Kuder, S.A.E. Langeslag, R. Leuxe, A. Macpherson, P. Minginette, E. Montesinos, F. Motschmann, C. Parente, L. Prever-Loiri, D. Pugnat, E. Rigutto, V. Rude, M. Sosin, G. Vandoni, G. Villiger, C. Zanoni
CERN, Geneva, Switzerland
S.A. Belomestnykh, S. Verdú-Andrés, Q. Wu, B. P. Xiao
BNL, Upton, Long Island, New York, USA
G. Burt
Lancaster University, Lancaster, United Kingdom
S.U. De Silva, J.R. Delayen, R.G. Olave, R.G. Olave, H. Park
ODU, Norfolk, Virginia, USA
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
Z. Li
SLAC, Menlo Park, California, USA
K.B. Marinov, S.M. Pattalwar
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
T.H. Nicol
Fermilab, Batavia, Illinois, USA
A. Ratti
LBNL, Berkeley, California, USA

The HL-LHC project aims at increasing the LHC luminosity by a factor 10 beyond the design value. The installation of a set of RF Crab Cavities to increase bunch crossing angle is one of the key upgrades of the program. Two concepts, Double Quarter Wave (DQW) and RF Dipole (RFD) have been proposed and are being produced in parallel for test in the SPS beam before the next long shutdown of CERN accelerator’s complex. In the retained concept, two cavities are hosted in one single cryomodule, providing thermal insulation and interfacing with RF coupling, tuning, cryogenics and beam vacuum. This paper overviews the main design choices for the cryomodule and its different components, which have the goal of optimizing the structural, thermal and electro-magnetic behavior of the system, while respecting the existing constraints in terms of integration in the accelerator environment. Prototyping and testing of the most critical components, manufacturing, preparation and installation strategies are also described.

Slides FRBA02 [4.678 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)