SRF2015 - List of Authors (McIntyre, G.T.)

Paper	Title	Page
THAA03	SRF Gun at BNL: First Beam and Other Commissioning Results	1001
	W. Xu, Z. Altinbas, S.A. Belomestnykh, I. Ben-Zvi, L. DeSanto, S. Deonarine, D.M. Gassner, R.C. Gupta, H. Hahn, L.R. Hammons, C. Ho, J.P. Jamilkowski, P. K. Kankiya, D. Kayran, R. Kellermann, N. Laloudakis, R.F. Lambiase, C.J. Liaw, V. Litvinenko, G.J. Mahler, L. Masi, G.T. McIntyre, T.A. Miller, D. Phillips, V. Ptitsyn, T. Rao, T. Seda, B. Sheehy, K.S. Smith, A.N. Steszyn, T.N. Tallerico, R. Than, J.E. Tuozzolo, E. Wang, D. Weiss, M. Wilinski, A. Zaltsman, Z. Zhao BNL, Upton, Long Island, New York, USA S.A. Belomestnykh, I. Ben-Zvi, V. Litvinenko Stony Brook University, Stony Brook, USA
	The talk shall cover two SRF photoemission electron guns under commissioning at BNL: a 704 MHz elliptical ERL gun and a 112 MHz quarter-wave gun for coherent electron cooling experiment. In particular, the speaker shall report on generating first photoemission beam current from the 704 MHz SRF gun, multipacting issues in the SRF guns, photocathode behavior as well as other commissioning experiences and results.
	Slides THAA03 [2.215 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB063	BNL 56 MHz HOM Damper Fabrication at JLab	1262
	N.A. Huque, W.A. Clemens, E. Daly JLab, Newport News, Virginia, USA S. Bellavia, G.T. McIntyre, S.K. Seberg, Q. Wu BNL, Upton, Long Island, New York, USA
	The Higher-Order Mode (HOM) Dampers for the Relativistic Heavy-Ion Collider’s (RHIC) 56 MHz cavity at Brookhaven National Laboratory (BNL) are currently being fabricated at JLab. The coaxial damper is primarily constructed with high RRR niobium, with a combination of niobium and sapphire rings as the filter assembly. Several design changes have been made with respect to the performance of a prototype damper – also fabricated at JLab – which was found to quench at low power. The production dampers are being tuned and tested in the JLab vertical test area (VTA) prior to delivery. Two HOM dampers will be delivered to BNL; they are to be used in the RHIC in November, 2015. This paper outlines the challenges faced in the fabrication and tuning process.
	Poster THPB063 [2.315 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Page

SRF Gun at BNL: First Beam and Other Commissioning Results

1001

W. Xu, Z. Altinbas, S.A. Belomestnykh, I. Ben-Zvi, L. DeSanto, S. Deonarine, D.M. Gassner, R.C. Gupta, H. Hahn, L.R. Hammons, C. Ho, J.P. Jamilkowski, P. K. Kankiya, D. Kayran, R. Kellermann, N. Laloudakis, R.F. Lambiase, C.J. Liaw, V. Litvinenko, G.J. Mahler, L. Masi, G.T. McIntyre, T.A. Miller, D. Phillips, V. Ptitsyn, T. Rao, T. Seda, B. Sheehy, K.S. Smith, A.N. Steszyn, T.N. Tallerico, R. Than, J.E. Tuozzolo, E. Wang, D. Weiss, M. Wilinski, A. Zaltsman, Z. Zhao
BNL, Upton, Long Island, New York, USA
S.A. Belomestnykh, I. Ben-Zvi, V. Litvinenko
Stony Brook University, Stony Brook, USA

The talk shall cover two SRF photoemission electron guns under commissioning at BNL: a 704 MHz elliptical ERL gun and a 112 MHz quarter-wave gun for coherent electron cooling experiment. In particular, the speaker shall report on generating first photoemission beam current from the 704 MHz SRF gun, multipacting issues in the SRF guns, photocathode behavior as well as other commissioning experiences and results.

Slides THAA03 [2.215 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB063

BNL 56 MHz HOM Damper Fabrication at JLab

1262

N.A. Huque, W.A. Clemens, E. Daly
JLab, Newport News, Virginia, USA
S. Bellavia, G.T. McIntyre, S.K. Seberg, Q. Wu
BNL, Upton, Long Island, New York, USA

The Higher-Order Mode (HOM) Dampers for the Relativistic Heavy-Ion Collider’s (RHIC) 56 MHz cavity at Brookhaven National Laboratory (BNL) are currently being fabricated at JLab. The coaxial damper is primarily constructed with high RRR niobium, with a combination of niobium and sapphire rings as the filter assembly. Several design changes have been made with respect to the performance of a prototype damper – also fabricated at JLab – which was found to quench at low power. The production dampers are being tuned and tested in the JLab vertical test area (VTA) prior to delivery. Two HOM dampers will be delivered to BNL; they are to be used in the RHIC in November, 2015. This paper outlines the challenges faced in the fabrication and tuning process.

Poster THPB063 [2.315 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)