SRF2015 - List of Authors (Kuder, N.)

Paper	Title	Page
THPB060	Development of SRF Cavity Tuners for CERN	1247
	K. Artoos, R. Calaga, O. Capatina, T. Capelli, F. Carra, L. Dassa, N. Kuder, R. Leuxe, P. Minginette, W. Venturini Delsolaro, G. Villiger, C. Zanoni, P. Zhang CERN, Geneva, Switzerland G. Burt Cockcroft Institute, Lancaster University, Lancaster, United Kingdom J.R. Delayen, H. Park ODU, Norfolk, Virginia, USA T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom S. Verdú-Andrés, B. P. Xiao BNL, Upton, Long Island, New York, USA
	Superconducting RF cavity developments are currently on-going for new accelerator projects at CERN such as HIE ISOLDE and HL-LHC. Mechanical RF tuning systems are required to compensate cavity frequency shifts of the cavities due to temperature, mechanical, pressure and RF effects on the cavity geometry. A rich history and experience is available for such mechanical tuners developed for existing RF cavities. Design constraints in the context of HIE ISOLDE and HL-LHC such as required resolution, space limitation, reliability and maintainability have led to new concepts in the tuning mechanisms. This paper will discuss such new approaches, their performances and planned developments.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB070	Design of Dressed Crab Cavities for the HL-LHC Upgrade	1284
	C. Zanoni, K. Artoos, S. Atieh, I. Aviles Santillana, J.P. Brachet, R. Calaga, O. Capatina, T. Capelli, F. Carra, L. Dassa, G. Favre, P. Freijedo Menendez, M. Garlaschè, M. Guinchard, N. Kuder, S.A.E. Langeslag, R. Leuxe, L. Prever-Loiri, G. Vandoni CERN, Geneva, Switzerland S.A. Belomestnykh, I. Ben-Zvi, S. Verdú-Andrés, Q. Wu, B. P. Xiao BNL, Upton, Long Island, New York, USA I. Ben-Zvi Stony Brook University, Stony Brook, USA G. Burt Lancaster University, Lancaster, United Kingdom S.U. De Silva, R.G. Olave, H. Park ODU, Norfolk, Virginia, USA J.R. Delayen JLab, Newport News, Virginia, USA T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom Z. Li SLAC, Menlo Park, California, USA K.B. Marinov, A.J. May, S.M. Pattalwar STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom T.H. Nicol Fermilab, Batavia, Illinois, USA A. Ratti LBNL, Berkeley, California, USA
	The HL-LHC upgrade relies on a set of RF crab cavities for reaching its goals. Two parallel concepts, the Double Quarter Wave (DQW) and the RF Dipole (RFD), are going through a comprehensive design process along with preparation of fabrication in view of extensive tests with beam in SPS. High Order Modes (HOM) couplers are critical in providing damping in RF cavities for operation in accelerators. HOM prototyping and fabrication have recently started at CERN. In this paper, an overview of the final geometry is provided along with an insight in the mechanical and thermal analyses performed to validate the design of this critical component. Emphasis is also given to material selection, prototyping, initial fabrication and test campaigns that are aimed at fulfilling the highly demanding tolerances of the couplers.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

FRBA02	Crab Cavity and Cryomodule Development for HL-LHC	1460
	F. Carra, A. Amorim Carvalho, K. Artoos, S. Atieh, I. Aviles Santillana, A.B. Boucherie, J.P. Brachet, K. Brodzinski, R. Calaga, O. Capatina, T. Capelli, L. Dassa, T. Dijoud, H.M. Durand, G. Favre, L.M.A. Ferreira, P. Freijedo Menendez, M. Garlaschè, M. Guinchard, N. Kuder, S.A.E. Langeslag, R. Leuxe, A. Macpherson, P. Minginette, E. Montesinos, F. Motschmann, C. Parente, L. Prever-Loiri, D. Pugnat, E. Rigutto, V. Rude, M. Sosin, G. Vandoni, G. Villiger, C. Zanoni CERN, Geneva, Switzerland S.A. Belomestnykh, S. Verdú-Andrés, Q. Wu, B. P. Xiao BNL, Upton, Long Island, New York, USA G. Burt Lancaster University, Lancaster, United Kingdom S.U. De Silva, J.R. Delayen, R.G. Olave, R.G. Olave, H. Park ODU, Norfolk, Virginia, USA T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom Z. Li SLAC, Menlo Park, California, USA K.B. Marinov, S.M. Pattalwar STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom T.H. Nicol Fermilab, Batavia, Illinois, USA A. Ratti LBNL, Berkeley, California, USA
	The HL-LHC project aims at increasing the LHC luminosity by a factor 10 beyond the design value. The installation of a set of RF Crab Cavities to increase bunch crossing angle is one of the key upgrades of the program. Two concepts, Double Quarter Wave (DQW) and RF Dipole (RFD) have been proposed and are being produced in parallel for test in the SPS beam before the next long shutdown of CERN accelerator’s complex. In the retained concept, two cavities are hosted in one single cryomodule, providing thermal insulation and interfacing with RF coupling, tuning, cryogenics and beam vacuum. This paper overviews the main design choices for the cryomodule and its different components, which have the goal of optimizing the structural, thermal and electro-magnetic behavior of the system, while respecting the existing constraints in terms of integration in the accelerator environment. Prototyping and testing of the most critical components, manufacturing, preparation and installation strategies are also described.
	Slides FRBA02 [4.678 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Page

Development of SRF Cavity Tuners for CERN

1247

K. Artoos, R. Calaga, O. Capatina, T. Capelli, F. Carra, L. Dassa, N. Kuder, R. Leuxe, P. Minginette, W. Venturini Delsolaro, G. Villiger, C. Zanoni, P. Zhang
CERN, Geneva, Switzerland
G. Burt
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
J.R. Delayen, H. Park
ODU, Norfolk, Virginia, USA
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
S. Verdú-Andrés, B. P. Xiao
BNL, Upton, Long Island, New York, USA

Superconducting RF cavity developments are currently on-going for new accelerator projects at CERN such as HIE ISOLDE and HL-LHC. Mechanical RF tuning systems are required to compensate cavity frequency shifts of the cavities due to temperature, mechanical, pressure and RF effects on the cavity geometry. A rich history and experience is available for such mechanical tuners developed for existing RF cavities. Design constraints in the context of HIE ISOLDE and HL-LHC such as required resolution, space limitation, reliability and maintainability have led to new concepts in the tuning mechanisms. This paper will discuss such new approaches, their performances and planned developments.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

THPB070

Design of Dressed Crab Cavities for the HL-LHC Upgrade

1284

C. Zanoni, K. Artoos, S. Atieh, I. Aviles Santillana, J.P. Brachet, R. Calaga, O. Capatina, T. Capelli, F. Carra, L. Dassa, G. Favre, P. Freijedo Menendez, M. Garlaschè, M. Guinchard, N. Kuder, S.A.E. Langeslag, R. Leuxe, L. Prever-Loiri, G. Vandoni
CERN, Geneva, Switzerland
S.A. Belomestnykh, I. Ben-Zvi, S. Verdú-Andrés, Q. Wu, B. P. Xiao
BNL, Upton, Long Island, New York, USA
I. Ben-Zvi
Stony Brook University, Stony Brook, USA
G. Burt
Lancaster University, Lancaster, United Kingdom
S.U. De Silva, R.G. Olave, H. Park
ODU, Norfolk, Virginia, USA
J.R. Delayen
JLab, Newport News, Virginia, USA
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
Z. Li
SLAC, Menlo Park, California, USA
K.B. Marinov, A.J. May, S.M. Pattalwar
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
T.H. Nicol
Fermilab, Batavia, Illinois, USA
A. Ratti
LBNL, Berkeley, California, USA

The HL-LHC upgrade relies on a set of RF crab cavities for reaching its goals. Two parallel concepts, the Double Quarter Wave (DQW) and the RF Dipole (RFD), are going through a comprehensive design process along with preparation of fabrication in view of extensive tests with beam in SPS. High Order Modes (HOM) couplers are critical in providing damping in RF cavities for operation in accelerators. HOM prototyping and fabrication have recently started at CERN. In this paper, an overview of the final geometry is provided along with an insight in the mechanical and thermal analyses performed to validate the design of this critical component. Emphasis is also given to material selection, prototyping, initial fabrication and test campaigns that are aimed at fulfilling the highly demanding tolerances of the couplers.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

FRBA02

Crab Cavity and Cryomodule Development for HL-LHC

1460

F. Carra, A. Amorim Carvalho, K. Artoos, S. Atieh, I. Aviles Santillana, A.B. Boucherie, J.P. Brachet, K. Brodzinski, R. Calaga, O. Capatina, T. Capelli, L. Dassa, T. Dijoud, H.M. Durand, G. Favre, L.M.A. Ferreira, P. Freijedo Menendez, M. Garlaschè, M. Guinchard, N. Kuder, S.A.E. Langeslag, R. Leuxe, A. Macpherson, P. Minginette, E. Montesinos, F. Motschmann, C. Parente, L. Prever-Loiri, D. Pugnat, E. Rigutto, V. Rude, M. Sosin, G. Vandoni, G. Villiger, C. Zanoni
CERN, Geneva, Switzerland
S.A. Belomestnykh, S. Verdú-Andrés, Q. Wu, B. P. Xiao
BNL, Upton, Long Island, New York, USA
G. Burt
Lancaster University, Lancaster, United Kingdom
S.U. De Silva, J.R. Delayen, R.G. Olave, R.G. Olave, H. Park
ODU, Norfolk, Virginia, USA
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
Z. Li
SLAC, Menlo Park, California, USA
K.B. Marinov, S.M. Pattalwar
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
T.H. Nicol
Fermilab, Batavia, Illinois, USA
A. Ratti
LBNL, Berkeley, California, USA

The HL-LHC project aims at increasing the LHC luminosity by a factor 10 beyond the design value. The installation of a set of RF Crab Cavities to increase bunch crossing angle is one of the key upgrades of the program. Two concepts, Double Quarter Wave (DQW) and RF Dipole (RFD) have been proposed and are being produced in parallel for test in the SPS beam before the next long shutdown of CERN accelerator’s complex. In the retained concept, two cavities are hosted in one single cryomodule, providing thermal insulation and interfacing with RF coupling, tuning, cryogenics and beam vacuum. This paper overviews the main design choices for the cryomodule and its different components, which have the goal of optimizing the structural, thermal and electro-magnetic behavior of the system, while respecting the existing constraints in terms of integration in the accelerator environment. Prototyping and testing of the most critical components, manufacturing, preparation and installation strategies are also described.

Slides FRBA02 [4.678 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)