SRF2011 - List of Authors (Adolphsen, C.)

Paper

Title

Page

SLAC/FNAL TTF3 Coupler Assembly and Processing Experience

476

C. Adolphsen, A.A. Haase, C.D. Nantista, J. Tice, F. Wang
SLAC, Menlo Park, California, USA
T.T. Arkan, M.S. Champion, S. Kazakov, A. Lunin, K.S. Premo
Fermilab, Batavia, USA

Funding: Work supported by the U.S. Department of Energy under contract number DE-AC02-76SF00515
The TTF3-style coupler is typically used to power 1.3 GHz TESLA-type superconducting cavities. For the US ILC program, parts purchased in industry for such couplers are received at SLAC where they are inspected, cleaned, assembled as pairs in a Class 10 cleanroom, pumped down, baked at 150 degC and rf processed. The pairs are then shipped to FNAL and installed in cavities that are then tested at input power levels up to 300 kW. This paper describes the coupler results to date including improvements to the procedures and efforts to mitigate problems that have been encountered. Also progress on building a cold coupler section without e-beam wielding is presented.

Poster TUPO042 [0.712 MB]

THIOA01

Test Results of the International S1-Global Cryomodule

615

Y. Yamamoto, M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, H. Matsushita, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, K. Yokoya, M. Yoshida
KEK, Ibaraki, Japan
C. Adolphsen, C.D. Nantista
SLAC, Menlo Park, California, USA
T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith
Fermilab, Batavia, USA
A. Bosotti, C. Pagani, R. Paparella, P. Pierini
INFN/LASA, Segrate (MI), Italy
K. Jensch, D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise
DESY, Hamburg, Germany

S1-Global collaborative project by joint efforts of INFN, DESY, FNAL, SLAC and KEK, finished successfully at KEK- STF on February in 2011, is a crucial project for ILC. For this project, 8 SRF cavities, 2 from DESY, 2 from FNAL and 4 from KEK, were installed into one cryomodule with the thermal shields and the cooling pipes of liquid helium and nitrogen, cooled down to 2K totally three times, and cold-tested by using the three different frequency tuning systems (Blade tuner from INFN/FNAL, Saclay tuner from DESY and Slide-Jack tuner from KEK) and two types of input couplers (TTF III from DESY and STF#2 from KEK). During the cold test with high power, cavity performance, LFD (Lorentz Force Detuning) compensation by Piezo actuator, simultaneous 7 SRF cavities operation, dynamic heating loss measurement including static loss and DRFS (Distributed RF Scheme) operation with LLRF (Low Level RF) feedback system, were established successfully. In this talk, the results of the S1-Global cryomodule test are reported, discussed and summarized.

Slides THIOA01 [11.254 MB]

Paper	Title	Page
TUPO042	SLAC/FNAL TTF3 Coupler Assembly and Processing Experience	476
	C. Adolphsen, A.A. Haase, C.D. Nantista, J. Tice, F. Wang SLAC, Menlo Park, California, USA T.T. Arkan, M.S. Champion, S. Kazakov, A. Lunin, K.S. Premo Fermilab, Batavia, USA
	Funding: Work supported by the U.S. Department of Energy under contract number DE-AC02-76SF00515 The TTF3-style coupler is typically used to power 1.3 GHz TESLA-type superconducting cavities. For the US ILC program, parts purchased in industry for such couplers are received at SLAC where they are inspected, cleaned, assembled as pairs in a Class 10 cleanroom, pumped down, baked at 150 degC and rf processed. The pairs are then shipped to FNAL and installed in cavities that are then tested at input power levels up to 300 kW. This paper describes the coupler results to date including improvements to the procedures and efforts to mitigate problems that have been encountered. Also progress on building a cold coupler section without e-beam wielding is presented.
	Poster TUPO042 [0.712 MB]

THIOA01	Test Results of the International S1-Global Cryomodule	615
	Y. Yamamoto, M. Akemoto, S. Fukuda, K. Hara, H. Hayano, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, H. Matsushita, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, M. Satoh, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, K. Yokoya, M. Yoshida KEK, Ibaraki, Japan C. Adolphsen, C.D. Nantista SLAC, Menlo Park, California, USA T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith Fermilab, Batavia, USA A. Bosotti, C. Pagani, R. Paparella, P. Pierini INFN/LASA, Segrate (MI), Italy K. Jensch, D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise DESY, Hamburg, Germany
	S1-Global collaborative project by joint efforts of INFN, DESY, FNAL, SLAC and KEK, finished successfully at KEK- STF on February in 2011, is a crucial project for ILC. For this project, 8 SRF cavities, 2 from DESY, 2 from FNAL and 4 from KEK, were installed into one cryomodule with the thermal shields and the cooling pipes of liquid helium and nitrogen, cooled down to 2K totally three times, and cold-tested by using the three different frequency tuning systems (Blade tuner from INFN/FNAL, Saclay tuner from DESY and Slide-Jack tuner from KEK) and two types of input couplers (TTF III from DESY and STF#2 from KEK). During the cold test with high power, cavity performance, LFD (Lorentz Force Detuning) compensation by Piezo actuator, simultaneous 7 SRF cavities operation, dynamic heating loss measurement including static loss and DRFS (Distributed RF Scheme) operation with LLRF (Low Level RF) feedback system, were established successfully. In this talk, the results of the S1-Global cryomodule test are reported, discussed and summarized.
	Slides THIOA01 [11.254 MB]