2011 Particle Accelerator Conference - List of Authors (Dalesio, L.R.)

Paper	Title	Page
MOP198	BPM Inputs to Physics Applications at NSLS-II	465
	Y. Hu, L.R. Dalesio, J.H. DeLong, K. Ha, J. Mead, I. Pinayev, G. Shen, O. Singh, Y. Tian, K. Vetter, L.-H. Yu BNL, Upton, Long Island, New York, USA
	A new BPM (Beam Position Monitor) electronics is under development and in good progress at NSLS-II. This in-house BPM receiver with many new features is comparable to commercial solution. BPM data for fast orbit feedback (FOFB) is one of the most important physics applications. The procedure to use BPM for FOFB is introduced firstly. Then, different BPM data flows associated with different physics requirements and applications are discussed. And control implementation of BPM system for physics applications is presented.

TUP193	NSLS-II Power Supply Controller	1187
	W. Louie, L.R. Dalesio, G. Ganetis, Y. Tian BNL, Upton, Long Island, New York, USA
	This paper presents the design of the National Synchrotron Light Source II (NSLS-II) Power Supply Controller (PSC). It consists of a main board, rear module and backplane. The main features of NSLS-II PSC included 256MB DDR2 memory for power supply system diagnostics, high speed serial link between PSC modules, an embedded microprocessor and a 100 Mbps Ethernet port. Each PSC module can be remotely programmed through network. NSLS-II PSC will be used to control power supplies in Storage Ring, Booster Ring and Transport line. The PSC also provides interface for the NSLS-II fast and slow orbits feedback system.

THP216	Progress with NSLS-II Injection Straight Section Design	2528
	T.V. Shaftan, A. Blednykh, W.R. Casey, L.R. Dalesio, R. Faussete, M.J. Ferreira, R.P. Fliller, G. Ganetis, R. Heese, H.-C. Hseuh, P.K. Job, E.D. Johnson, B.N. Kosciuk, S. Kowalski, S.L. Kramer, D. Padrazo, B. Parker, I. Pinayev, S.K. Sharma, O. Singh, C.J. Spataro, G.M. Wang, F.J. Willeke BNL, Upton, Long Island, New York, USA
	Funding: This work is supported by U.S. DOE, Contract No.DE-AC02-98CH10886 NSLS-II injection straight section consists of the pulsed and DC/Slow bumps, septa system, beam trajectory correction and diagnostics systems. In this paper we discuss overall injection straight layout, preliminary element designs, specifications for the pulsed and DC magnets and their power supplies, vacuum devices and chambers and diagnostics devices.

Paper

Title

Page

BPM Inputs to Physics Applications at NSLS-II

465

Y. Hu, L.R. Dalesio, J.H. DeLong, K. Ha, J. Mead, I. Pinayev, G. Shen, O. Singh, Y. Tian, K. Vetter, L.-H. Yu
BNL, Upton, Long Island, New York, USA

A new BPM (Beam Position Monitor) electronics is under development and in good progress at NSLS-II. This in-house BPM receiver with many new features is comparable to commercial solution. BPM data for fast orbit feedback (FOFB) is one of the most important physics applications. The procedure to use BPM for FOFB is introduced firstly. Then, different BPM data flows associated with different physics requirements and applications are discussed. And control implementation of BPM system for physics applications is presented.

TUP193

NSLS-II Power Supply Controller

1187

W. Louie, L.R. Dalesio, G. Ganetis, Y. Tian
BNL, Upton, Long Island, New York, USA

This paper presents the design of the National Synchrotron Light Source II (NSLS-II) Power Supply Controller (PSC). It consists of a main board, rear module and backplane. The main features of NSLS-II PSC included 256MB DDR2 memory for power supply system diagnostics, high speed serial link between PSC modules, an embedded microprocessor and a 100 Mbps Ethernet port. Each PSC module can be remotely programmed through network. NSLS-II PSC will be used to control power supplies in Storage Ring, Booster Ring and Transport line. The PSC also provides interface for the NSLS-II fast and slow orbits feedback system.

THP216

Progress with NSLS-II Injection Straight Section Design

2528

T.V. Shaftan, A. Blednykh, W.R. Casey, L.R. Dalesio, R. Faussete, M.J. Ferreira, R.P. Fliller, G. Ganetis, R. Heese, H.-C. Hseuh, P.K. Job, E.D. Johnson, B.N. Kosciuk, S. Kowalski, S.L. Kramer, D. Padrazo, B. Parker, I. Pinayev, S.K. Sharma, O. Singh, C.J. Spataro, G.M. Wang, F.J. Willeke
BNL, Upton, Long Island, New York, USA

Funding: This work is supported by U.S. DOE, Contract No.DE-AC02-98CH10886
NSLS-II injection straight section consists of the pulsed and DC/Slow bumps, septa system, beam trajectory correction and diagnostics systems. In this paper we discuss overall injection straight layout, preliminary element designs, specifications for the pulsed and DC magnets and their power supplies, vacuum devices and chambers and diagnostics devices.