JLAB, Newport News, Virginia, USA
Tech-X, Boulder, Colorado, USA
To benchmark a multi-physics code VORPAL developed by Tech-X, the High Order Mode (HOM) coaxial coupler design implemented in Jefferson Lab’s 12GeV upgrade cryomodules is analyzed by use of commercial codes, such as ANSYS, HFSS and Microwave Studio. Testing data from a Horizontal Test Bed (HTB) experiment on a dual-cavity prototype are also utilized in the verification of simulation results. The work includes two stages: first, the HOM feedthrough that has a high RRR niobium probe and sapphire insulator is analyzed for the RF-thermal response when there is traveling wave passing through; second, the HTB testing condition is simulated and results from simulation are compared to thermal measurements from HTB tests. The analyses are of coupled-field nature and involve highly nonlinear temperature dependent thermal conductivities and electric resistivities for the eight types of materials used in the design. Accuracy and efficiency are the main factors in evaluation of the performance of the codes.
ANL, Argonne, USA
LBNL, Berkeley, California, USA
JLAB, Newport News, Virginia, USA
The Advanced Photon Source Upgrade project (APS-U) at Argonne includes implementation of Zholents’* deflecting cavity scheme for production of short x-ray pulses. This is a joint project between Argonne National Laboratory, Thomas Jefferson National Laboratory, and Lawrence Berkeley National Laboratory. This paper describes performance characteristics of the proposed source and technical issues related to its realization. Ensuring stable APS storage ring operation requires reducing quality factors of these modes by many orders of magnitude. These challenges reduce to those of the design of a single-cell SC cavity that can achieve the desired operating deflecting fields while providing needed damping of all these modes. The project team is currently prototyping and testing several promising designs for single-cell cavities with the goal of deciding on a winning design in the near future.
*A. Zholents et al., NIM A 425, 385 (1999).
Tech-X, Boulder, Colorado, USA
JLAB, Newport News, Virginia, USA
Nuclear physics accelerators are powered by microwaves which must travel in waveguides between room-temperature sources and the cryogenic accelerator structures. The ohmic heat load from the microwaves is affected by the temperature-dependent surface resistance and in turn affects the cryogenic thermal conduction problem. Integrated EM & thermal analysis of this difficult non-linear problem is now possible with the VORPAL finite-difference time-domain simulation tool. We highlight thermal benchmarking work with a complex HOM feed-through geometry, done in collaboration with researchers at the Thomas Jefferson National Accelerator Laboratory, and discuss upcoming design studies with this emerging tool. This work is part of an effort to generalize the VORPAL framework to include generalized PDE capabilities, for wider multi-physics capabilities in the accelerator, vacuum electronics, plasma processing and fusion R&D fields, and we will also discuss user interface and algorithmic upgrades which facilitate this emerging multiphysics capability.
JLAB, Newport News, Virginia, USA
ANL, Argonne, USA
Two single-cell, superconducting, squashed elliptical crab cavities with waveguides to damp Higher Order Modes (HOM) and Lower Order Mode (LOM) have been designed and prototyped for the Short Pulse X-ray (SPX) project at the Advanced Photon Source (APS). The Baseline cavity with LOM damper on the beam pipe has been vertically tested and exceeded its performance specification with over 0.5MV deflecting voltage. The Alternate cavity design which uses an “on-cell” waveguide damper is preferred due to its larger LOM impedance safety margin. Its prototype cavity has been fabricated by a Computer Numerical Controlled (CNC) machine and is subject to further testing. The conceptual design, layout and analysis for various cryomodule components are presented.
ANL, Argonne, USA
JLAB, Newport News, Virginia, USA
Superconducting cavities have been analyzed for the short-pulse x-ray (SPX) project at the Advanced Photon Source (APS). Due to the strong damping requirements in the APS storage ring, single-cell superconducting cavities have been designed. The geometry has been optimized for lower-order and higher-order mode damping, reduced peak surface magnetic fields, and compact size. The integration of the cavity assembly, with dampers and waveguide input coupler, into a cryomodule will be discussed.