Diversified Technologies, Inc., Bedford, Massachusetts
Funding: U.S. Department of Energy SBIR Program
Diversified Technologies, Inc. (DTI) is developing a driver for a kicker strip-line deflector which inserts and extracts charge bunches to and from the electron and positron damping rings of the International Linear Collider. The kicker driver must drive a 50 Ω terminated TEM deflector blade at 10 kV with 2 ns flat-topped pulses, which according to the ILC pulsing protocol, bursts pulses at a 3 MHz rate within one-millisecond bursts occurring at a 5 Hz rate. The driver must also effectively absorb high-order mode signals emerging from the deflector. In this paper, DTI will describe current progress utilizing a combination of high voltage DSRDs (Drift Step Recovery Diodes) and high voltage MOSFETs. The MOSFET array switch, without the DSRDs, is itself suitable for many accelerator systems with 10 - 100 ns kicker requirements. DTI has designed and demonstrated the key elements of a solid state kicker driver which both meets the ILC requirements, is suitable for a wide range of kicker driver applications. Full scale development and test are exptected to occur in Phase II of this DOE SBIR effort, with a full scale demonstration scheduled in 2009.
SLAC, Menlo Park, California
The beam stability for the Linac Coherent Light Source (LCLS) Free-Electron Laser (FEL) at Stanford Linear Accelerator Center (SLAC) are critical for X-Ray power, pointing, and timing stability. Studies of the transverse, longitudinal, and intensity stability of the electron beam are presented. Identifying these sources by different methods like correlations, frequency spectrum analysis and other methods is critical for finally eliminating or reducing them.
