IPAC2015 - List of Authors (Schreiber, G.)

Paper	Title	Page
TUXB2	Upgrade of the Unilac for Fair	1281
	L. Groening, A. Adonin, R. M. Brodhage, X. Du, R. Hollinger, O.K. Kester, S. Mickat, A. Orzhekhovskaya, B. Schlitt, G. Schreiber, H. Vormann, C. Xiao GSI, Darmstadt, Germany H. Hähnel, U. Ratzinger, A. Seibel, R. Tiede IAP, Frankfurt am Main, Germany
	The UNIversal Linear Accelerator (UNILAC) at GSI serves as injector for all ion species from protons to uranium since four decades. Its 10⁸ MHz Alvarez type DTL providing acceleration from 1.4 MeV/u to 11.4 MeV/u has suffered from material fatigue. The DTL will be replaced by a completely new section with almost same design parameters, i.e. pulsed current of up to 15 mA of 238U²⁸⁺ at 11.4 MeV/u. A dedicated terminal & LEBT for operation with 238U⁴⁺ is currently constructed. The uranium sources need to be upgraded in order to provide increased beam brilliances and for operation at 3 Hz. In parallel a 70 MeV / 70 mA proton linac based on H-mode cavities is under design and construction. This contribution will also give a brief summary of the overall status of the FAIR project.
	Slides TUXB2 [4.634 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUXB2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA022	Progress of the Klystron and Cavity Test Stand for the FAIR Proton Linac	2802
	A. Schnase, E. Plechov, J. Salvatore, G. Schreiber, W. Vinzenz GSI, Darmstadt, Germany C. Joly, J. Lesrel IPN, Orsay, France
	In collaboration between the FAIR project, GSI, and CNRS, the IPNO lab provided the high power RF components for a cavity and klystron test stand. For initial operation of the 3 MW Thales TH2181 klystron at 325.224 MHz we received a high voltage modulator from CERN Linac 4 as a loan. Here we report, how we integrated the combination of klystron, high voltage modulator, and auxiliaries to accumulate operating experience. RF operation of the klystron started on a water cooled load, soon the circulator will be included and then the prototype CH cavity in the radiation shielded area will be powered. The 45 kW amplifiers for the 3 buncher structures of the FAIR proton Linac were checked at the test stand, and the results are presented here.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA022
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Upgrade of the Unilac for Fair

1281

L. Groening, A. Adonin, R. M. Brodhage, X. Du, R. Hollinger, O.K. Kester, S. Mickat, A. Orzhekhovskaya, B. Schlitt, G. Schreiber, H. Vormann, C. Xiao
GSI, Darmstadt, Germany
H. Hähnel, U. Ratzinger, A. Seibel, R. Tiede
IAP, Frankfurt am Main, Germany

The UNIversal Linear Accelerator (UNILAC) at GSI serves as injector for all ion species from protons to uranium since four decades. Its 10⁸ MHz Alvarez type DTL providing acceleration from 1.4 MeV/u to 11.4 MeV/u has suffered from material fatigue. The DTL will be replaced by a completely new section with almost same design parameters, i.e. pulsed current of up to 15 mA of 238U²⁸⁺ at 11.4 MeV/u. A dedicated terminal & LEBT for operation with 238U⁴⁺ is currently constructed. The uranium sources need to be upgraded in order to provide increased beam brilliances and for operation at 3 Hz. In parallel a 70 MeV / 70 mA proton linac based on H-mode cavities is under design and construction. This contribution will also give a brief summary of the overall status of the FAIR project.

Slides TUXB2 [4.634 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUXB2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA022

Progress of the Klystron and Cavity Test Stand for the FAIR Proton Linac

2802

A. Schnase, E. Plechov, J. Salvatore, G. Schreiber, W. Vinzenz
GSI, Darmstadt, Germany
C. Joly, J. Lesrel
IPN, Orsay, France

In collaboration between the FAIR project, GSI, and CNRS, the IPNO lab provided the high power RF components for a cavity and klystron test stand. For initial operation of the 3 MW Thales TH2181 klystron at 325.224 MHz we received a high voltage modulator from CERN Linac 4 as a loan. Here we report, how we integrated the combination of klystron, high voltage modulator, and auxiliaries to accumulate operating experience. RF operation of the klystron started on a water cooled load, soon the circulator will be included and then the prototype CH cavity in the radiation shielded area will be powered. The 45 kW amplifiers for the 3 buncher structures of the FAIR proton Linac were checked at the test stand, and the results are presented here.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA022

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)