IPAC2015 - List of Authors (Ruber, R.J.M.Y.)

Paper	Title	Page
WEPMN065	Progress at the FREIA Laboratory	3072
	M. Olvegård, A.K. Bhattacharyya, T.J.C. Ekelöf, J. Eriksson, K. Fransson, K.J. Gajewski, V.A. Goryashko, L. Hermansson, M. Holz, M. Jacewicz, M. Jobs, Å. Jönsson, H. Li, T. Lofnes, H. Nicander, R.J.M.Y. Ruber, R. Santiago Kern, R. Wedberg, V.G. Ziemann Uppsala University, Uppsala, Sweden D.S. Dancila, A. Rydberg Uppsala University, Department of Engineering Sciences, Uppsala, Sweden R.A. Yogi ESS, Lund, Sweden
	The FREIA Facility for Research Instrumentation and Accelerator Development at Uppsala University, Sweden, has reached the stage where the testing of superconducting cavities for the European Spallation Source (ESS) is starting. The new helium liquefaction plant has been commissioned and now supplies a custom-made, versatile horizontal cryostat, HNOSS, with liquid helium at up to 140 l/h. The cryostat has been designed and built to house up to two accelerating cavities, or, later on, other superconducting equipment such as magnets or crab cavities. A prototype cavity for the spoke section of the ESS linac will arrive mid 2015 for high-power testing in the horizontal cryostat. Two tetrode-based commercial RF power stations will deliver 400 kW peak power each, at 352 MHz, to the cavity through an RF distribution line developed at FREIA. In addition, significant progress has been made with in-house development of solid state amplifier modules and power combiners for future use in particle accelerators. We report here on these and other ongoing activities at the FREIA laboratory.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMN065
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPF081	On the Suitability of a Solenoid Horn for the ESS Neutrino Superbeam	3873
	M. Olvegård, T.J.C. Ekelöf, R.J.M.Y. Ruber, V.G. Ziemann Uppsala University, Uppsala, Sweden J.-P. Koutchouk CERN, Geneva, Switzerland
	The European Spallation Source (ESS), now under construction in Lund, Sweden, offers unique opportunities for experimental physics, not only in neutron science but potentially in particle physics. The ESS neutrino superbeam project plans to use a 5 MW proton beam from the ESS linac to generate a high intensity neutrino superbeam, with the final goal of detecting leptonic CP-violation in an underground megaton Cherenkov water detector. The neutrino production requires a second target station and a complex focusing system for the pions emerging from the target. The normal-conducting magnetic horns that are normally used for these applications cannot accept the 2.86 ms long proton pulses of the ESS linac, which means that pulse shortening in an accumulator ring would be required. That, in turn, requires H⁻ operation in the linac to accommodate the high intensity. As an attractive alternative, we investigate the possibility of using superconducting solenoids for the pion focusing. This solenoid horn system needs to also separate positive and negative pion charge as completely as possible, in order to generate separately neutrino and anti-neutrino beams. We present here progress in the study of such a solenoid horn.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-THPF081
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPF100	Status of the ESSnuSB Accumulator	3942
	E.H.M. Wildner, B.J. Holzer, M. Martini, Y. Papaphilippou, H.O. Schönauer CERN, Geneva, Switzerland T.J.C. Ekelöf, M. Olvegård, R.J.M.Y. Ruber Uppsala University, Uppsala, Sweden M. Eshraqi ESS, Lund, Sweden
	The European Spallation Source (ESS) is a research center based on the world's most powerful neutron source currently under construction in Lund, Sweden. 2.0 GeV, 2.86 ms long proton pulses at 14 Hz are produced for the spallation facility (5MW on target). The possibility to pulse the linac at higher frequency to deliver, in parallel with the spallation neutron production, a very intense, cost effective, high performance neutrino beam. Short pulses on the target require an accumulator ring. The optimization of the accumulator lattice to store these high intensity beams from the linac (1.1x10¹⁵ protons per pulse) has to take into account the space available on the ESS site, transport of H⁻ beams (charge exchange injection), radiation and shielding needs. Space must be available in the ring for collimation and an RF system for the extraction gap and loss control. We present the status of the accumulator for ESS neutrino facility.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-THPF100
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Progress at the FREIA Laboratory

3072

M. Olvegård, A.K. Bhattacharyya, T.J.C. Ekelöf, J. Eriksson, K. Fransson, K.J. Gajewski, V.A. Goryashko, L. Hermansson, M. Holz, M. Jacewicz, M. Jobs, Å. Jönsson, H. Li, T. Lofnes, H. Nicander, R.J.M.Y. Ruber, R. Santiago Kern, R. Wedberg, V.G. Ziemann
Uppsala University, Uppsala, Sweden
D.S. Dancila, A. Rydberg
Uppsala University, Department of Engineering Sciences, Uppsala, Sweden
R.A. Yogi
ESS, Lund, Sweden

The FREIA Facility for Research Instrumentation and Accelerator Development at Uppsala University, Sweden, has reached the stage where the testing of superconducting cavities for the European Spallation Source (ESS) is starting. The new helium liquefaction plant has been commissioned and now supplies a custom-made, versatile horizontal cryostat, HNOSS, with liquid helium at up to 140 l/h. The cryostat has been designed and built to house up to two accelerating cavities, or, later on, other superconducting equipment such as magnets or crab cavities. A prototype cavity for the spoke section of the ESS linac will arrive mid 2015 for high-power testing in the horizontal cryostat. Two tetrode-based commercial RF power stations will deliver 400 kW peak power each, at 352 MHz, to the cavity through an RF distribution line developed at FREIA. In addition, significant progress has been made with in-house development of solid state amplifier modules and power combiners for future use in particle accelerators. We report here on these and other ongoing activities at the FREIA laboratory.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMN065

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPF081

On the Suitability of a Solenoid Horn for the ESS Neutrino Superbeam

3873

M. Olvegård, T.J.C. Ekelöf, R.J.M.Y. Ruber, V.G. Ziemann
Uppsala University, Uppsala, Sweden
J.-P. Koutchouk
CERN, Geneva, Switzerland

The European Spallation Source (ESS), now under construction in Lund, Sweden, offers unique opportunities for experimental physics, not only in neutron science but potentially in particle physics. The ESS neutrino superbeam project plans to use a 5 MW proton beam from the ESS linac to generate a high intensity neutrino superbeam, with the final goal of detecting leptonic CP-violation in an underground megaton Cherenkov water detector. The neutrino production requires a second target station and a complex focusing system for the pions emerging from the target. The normal-conducting magnetic horns that are normally used for these applications cannot accept the 2.86 ms long proton pulses of the ESS linac, which means that pulse shortening in an accumulator ring would be required. That, in turn, requires H⁻ operation in the linac to accommodate the high intensity. As an attractive alternative, we investigate the possibility of using superconducting solenoids for the pion focusing. This solenoid horn system needs to also separate positive and negative pion charge as completely as possible, in order to generate separately neutrino and anti-neutrino beams. We present here progress in the study of such a solenoid horn.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-THPF081

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPF100

Status of the ESSnuSB Accumulator

3942

E.H.M. Wildner, B.J. Holzer, M. Martini, Y. Papaphilippou, H.O. Schönauer
CERN, Geneva, Switzerland
T.J.C. Ekelöf, M. Olvegård, R.J.M.Y. Ruber
Uppsala University, Uppsala, Sweden
M. Eshraqi
ESS, Lund, Sweden

The European Spallation Source (ESS) is a research center based on the world's most powerful neutron source currently under construction in Lund, Sweden. 2.0 GeV, 2.86 ms long proton pulses at 14 Hz are produced for the spallation facility (5MW on target). The possibility to pulse the linac at higher frequency to deliver, in parallel with the spallation neutron production, a very intense, cost effective, high performance neutrino beam. Short pulses on the target require an accumulator ring. The optimization of the accumulator lattice to store these high intensity beams from the linac (1.1x10¹⁵ protons per pulse) has to take into account the space available on the ESS site, transport of H⁻ beams (charge exchange injection), radiation and shielding needs. Space must be available in the ring for collimation and an RF system for the extraction gap and loss control. We present the status of the accumulator for ESS neutrino facility.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-THPF100

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)