IPAC2015 - List of Authors (Neumann, A.)

Paper	Title	Page
MOPWA022	Influence of Transient Beam Loading on the Longitudinal Beam Dynamics at BESSY VSR	141
	M. Ruprecht, P. Goslawski, A. Jankowiak, A. Neumann, M. Ries, G. Wüstefeld HZB, Berlin, Germany T. Weis DELTA, Dortmund, Germany
	BESSY VSR, a scheme where 1.7 ps and 15 ps long bunches (rms) can be stored simultaneously in the BESSY II storage ring has recently been proposed . The strong longitudinal bunch focusing is achieved by superconducting high gradient RF cavities. If the bunch fill pattern exhibits a significant inhomogeneity, e.g. due to gaps, transient beam loading causes a distortion of the longitudinal phase space which is different for each bunch. The result are variations along the fill pattern in synchronous phase, synchrotron frequency and bunch shape. This paper presents investigations of transient beam loading and depicts the consequences on bunch length, phase stability and longitudinal multi-bunch oscillations for the projected setup of BESSY VSR. G. Wüstefeld, A. Jankowiak, J. Knobloch, M. Ries, Simultaneous Long and Short Electron Bunches in the BESSY II Storage Ring, Proceedings of IPAC2011, San Sebastián, Spain
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPWA022
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPHA010	RF Feedback and Detuning Studies for the BESSY Variable Pulse Length Storage Ring Higher Harmonic SC Cavities	798
	A. Neumann, P. Echevarria, P. Goslawski, M. Ries, M. Ruprecht, A.V. Vélez, G. Wüstefeld HZB, Berlin, Germany
	For the feasibility of the BESSY VSR upgrade project of BESSY II two higher harmonic systems at a factor of 3 and 3.5 of the ring's RF fundamental of 500 MHz will be installed in the ring. Operating in continuous wave at high average accelerating field of 20 MV/m and phased at zero-crossing, the superconducting cavities have to be detuned within tight margins to ensure stable operation and low power consumption at a loaded Q of 5·10⁷. The field variation of the cavities is mainly driven by the repetitive transient beam-loading of the envisaged complex bunch fill pattern in the ring. Within this work combined LLRF-cavity and longitudinal beam dynamics simulation will demonstrate the limits for stable operation, especially the coupling between synchrotron oscillation and RF feedback settings. Further impact by beam current decay and top-up injection shots are being simulated. * G. Wüstefeld et al., IPAC 11, San Sebastiàn, Spain, p. 2936.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPHA010
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWA018	Progress Report of the Berlin Energy Recovery Project BERLinPro	1438
	M. Abo-Bakr, W. Anders, K.B. Bürkmann-Gehrlein, A. Burrill, A.B. Büchel, P. Echevarria, A. Frahm, H.-W. Glock, A. Jankowiak, C. Kalus, T. Kamps, G. Klemz, J. Knobloch, J. Kolbe, J. Kühn, O. Kugeler, B.C. Kuske, P. Kuske, A.N. Matveenko, A. Meseck, R. Müller, A. Neumann, N. Ohm, K. Ott, E. Panofski, F. Pflocksch, D. Pflückhahn, J. Rahn, J. Rudolph, M. Schmeißer, O. Schüler, J. Völker HZB, Berlin, Germany
	Funding: Work supported by German Bundesministerium für Bildung und Forschung, Land Berlin, and grants of Helmholtz Association The Helmholtz Zentrum Berlin is constructing the Energy Recovery Linac Project BERLinPro on its site in Berlin Adlershof. The project is intended to expand the required accelerator physics and technology knowledge mandatory for the design, construction and operation of future synchrotron light sources. The project goal is the generation of a high current (100 mA), high brilliance (norm. emittance below 1 mm mrad) cw electron beamat 2~ps rms bunch duration or below. The planning phase of the project is completed and the design phase of most of the components is finished. Many of them have already been ordered. After some delay the construction of the building has started in February 2015. The status of the various subprojects as well as a summary of current and future activities will be given. Major project milestones and details of the project time line will be finally introduced.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWA018
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA010	First Test Results of the BERLinPro 2-cell Booster Cavities	2765
	A. Burrill, W. Anders, A. Frahm, J. Knobloch, A. Neumann HZB, Berlin, Germany G. Ciovati, W.A. Clemens, P. Kneisel, L. Turlington JLab, Newport News, Virginia, USA
	The BERLinPro Energy Recovery Linac (ERL) is currently being built at Helmholtz-Zentrum Berlin in order to study the physics of operating a high current, a 100 mA, 50 MeV ERL utilizing all SRF cavity technology. This machine will utilize three unique SRF cryomodules for the photoinjector, booster and linac cryomodules respectively. The focus of this paper will be on the cavities contained within the booster cryomodule. Here there will be three 2-cell SRF cavities, based on the original design by Cornell University, but optimized to meet the needs of the project. All of the cavity fabrication, processing and testing was carried out at Jefferson Laboratory where 4 cavities were produced and the 3 cavities with the best RF performance were fitted with helium vessels for installation in the cryomodule. This paper will report on the test results of the cavities as measured in the vertical testing dewar at JLab after fabrication and again after outfitting with the helium vessels.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA010
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA011	First Horizontal Test Results of the HZB SRF Photoinjector for BERLinPro	2768
	A. Burrill, W. Anders, A. Frahm, J. Knobloch, A. Neumann HZB, Berlin, Germany G. Ciovati, W.A. Clemens, P. Kneisel, L. Turlington JLab, Newport News, Virginia, USA
	The BERLinPro project, a small superconducting RF (SRF) c.w. energy recovery linac (ERL) is being built at Helmholtz-Zentrum Berlin in order to develop the technology required for operation of a high current, 100 mA, 50 MeV ERL. The electron source for the accelerator is a 1.4 cell SRF photoinjector fitted with a multi-alkali photocathode. As part of the HZB photoinjector development program three different SRF photoinjectors will be fabricated and tested. The photoinjector described herein is the second cavity that has been fabricated, and the first photoinjector designed for use with a multi-alkali photocathode. The photoinjector has been built and tested at JLab and subsequently shipped to HZB for testing in the horizontal test cryostat HoBiCaT prior to installation in the photoinjector cryomodule. This cryomodule will be used to measure the photocathode operation in a dedicated experiment called GunLab, the precursor to installation in the BERLinPro hall. This paper will report on the final results of the cavity installed in the helium vessel in the vertical testing dewar at Jefferson Lab as well as the first horizontal test in HoBiCaT
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA011
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA012	High-Q Cavity Operation: Study on the Thermoelectrically Induced Contribution to RF Surface Resistance	2771
	J.M. Köszegi, J. Knobloch, O. Kugeler, A. Neumann, A.V. Vélez HZB, Berlin, Germany
	We present a study concerning the operation of a superconducting RF cavity (non-doped niobium) in horizontal testing with the focus on understanding the thermoelectrically induced contribution to the surface resistance. Starting in 2009, we suggested a means of reducing the residual resistance by warming up a cavity after initial cooldown to about 20K and cooling it down again. In subsequent studies we used this technique to manipulate the residual resistance by more than a factor of 2. We postulated that thermocurrents during cooldown generate additional trapped magnetic flux that impacts the cavity quality factor. Since several questions remained open, we present here a more extensive study including measurement of two additional passband modes of the 9-cell cavity that confirms the effect. We also discuss simulations that substantiate the claim. While the layout of the cavity LHe tank system is cylindrically symmetric, we show that the temperature dependence of the material parameters result in a non-symmetric current distribution. Hence a significant amount of magnetic flux can be generated at the RF surface resulting in an increased surface resistance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA012
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA013	Hom Damping Optimization Design Studies for BESSY VSR Cavities	2774
	A.V. Vélez, H.-W. Glock, J. Knobloch, A. Neumann HZB, Berlin, Germany
	The BESSY VSR project is a future upgrade of the 3rd generation BESSY II light source. By using the same "standard" user optics, simultaneously long (ca. 15ps) and short (ca. 1.5ps) bunches will be stored. Thus, superconducting higher harmonic cavities of the fundamental 500 MHz at two frequencies need to be installed in the BESSY II storage ring. This work describes the optimizations studies for the Waveguide-based HOM dampers and the adjustable fundamental power coupler for the 1.5 GHz first SRF cavity prototype.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA013
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA036	Double-Cell Notch Filter for SRF Gun Investigations	2838
	E.N. Zaplatin FZJ, Jülich, Germany A. Kanareykin Euclid TechLabs, LLC, Solon, Ohio, USA J. Knobloch, A. Neumann HZB, Berlin, Germany V.P. Yakovlev Fermilab, Batavia, Illinois, USA
	Some projects of SRF guns apply the design where the cathode can be easily and quickly removed. One of the disadvantages of this design is the RF power leakage from the accelerating gun cavity cells to the cathode housing that results in the excessive cathode heating. To minimize the RF power leak different kinds of choke filters are used to protect the cathode structure. These choke filters represent resonant circuits with a zero input impedance and installed at the entrance of the cathode structure that shunt the cathode housing. Still, since the choke filter frequency shift under working conditions is bigger than its bandwidth a filter tuning during assembly only in the warm stage seems insufficient and requires also fine-tuning during operation. To eliminate the problems of the choke filter fine-tuning and hence ensure its stability during operation, a combination of the resonance choke elements can be implemented. In the paper we demonstrate advantages of the double-cell notch filter using BERLinPro SRF gun cavity as an example with its simple design modifications.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA036
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Influence of Transient Beam Loading on the Longitudinal Beam Dynamics at BESSY VSR

141

M. Ruprecht, P. Goslawski, A. Jankowiak, A. Neumann, M. Ries, G. Wüstefeld
HZB, Berlin, Germany
T. Weis
DELTA, Dortmund, Germany

BESSY VSR, a scheme where 1.7 ps and 15 ps long bunches (rms) can be stored simultaneously in the BESSY II storage ring has recently been proposed *. The strong longitudinal bunch focusing is achieved by superconducting high gradient RF cavities. If the bunch fill pattern exhibits a significant inhomogeneity, e.g. due to gaps, transient beam loading causes a distortion of the longitudinal phase space which is different for each bunch. The result are variations along the fill pattern in synchronous phase, synchrotron frequency and bunch shape. This paper presents investigations of transient beam loading and depicts the consequences on bunch length, phase stability and longitudinal multi-bunch oscillations for the projected setup of BESSY VSR.
* G. Wüstefeld, A. Jankowiak, J. Knobloch, M. Ries, Simultaneous Long and Short Electron Bunches in the BESSY II Storage Ring, Proceedings of IPAC2011, San Sebastián, Spain

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPWA022

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPHA010

RF Feedback and Detuning Studies for the BESSY Variable Pulse Length Storage Ring Higher Harmonic SC Cavities

798

A. Neumann, P. Echevarria, P. Goslawski, M. Ries, M. Ruprecht, A.V. Vélez, G. Wüstefeld
HZB, Berlin, Germany

For the feasibility of the BESSY VSR upgrade project of BESSY II two higher harmonic systems at a factor of 3 and 3.5 of the ring's RF fundamental of 500 MHz will be installed in the ring. Operating in continuous wave at high average accelerating field of 20 MV/m and phased at zero-crossing, the superconducting cavities have to be detuned within tight margins to ensure stable operation and low power consumption at a loaded Q of 5·10⁷. The field variation of the cavities is mainly driven by the repetitive transient beam-loading of the envisaged complex bunch fill pattern in the ring. Within this work combined LLRF-cavity and longitudinal beam dynamics simulation will demonstrate the limits for stable operation, especially the coupling between synchrotron oscillation and RF feedback settings. Further impact by beam current decay and top-up injection shots are being simulated.
* G. Wüstefeld et al., IPAC 11, San Sebastiàn, Spain, p. 2936.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPHA010

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPWA018

Progress Report of the Berlin Energy Recovery Project BERLinPro

1438

M. Abo-Bakr, W. Anders, K.B. Bürkmann-Gehrlein, A. Burrill, A.B. Büchel, P. Echevarria, A. Frahm, H.-W. Glock, A. Jankowiak, C. Kalus, T. Kamps, G. Klemz, J. Knobloch, J. Kolbe, J. Kühn, O. Kugeler, B.C. Kuske, P. Kuske, A.N. Matveenko, A. Meseck, R. Müller, A. Neumann, N. Ohm, K. Ott, E. Panofski, F. Pflocksch, D. Pflückhahn, J. Rahn, J. Rudolph, M. Schmeißer, O. Schüler, J. Völker
HZB, Berlin, Germany

Funding: Work supported by German Bundesministerium für Bildung und Forschung, Land Berlin, and grants of Helmholtz Association
The Helmholtz Zentrum Berlin is constructing the Energy Recovery Linac Project BERLinPro on its site in Berlin Adlershof. The project is intended to expand the required accelerator physics and technology knowledge mandatory for the design, construction and operation of future synchrotron light sources. The project goal is the generation of a high current (100 mA), high brilliance (norm. emittance below 1 mm mrad) cw electron beamat 2~ps rms bunch duration or below. The planning phase of the project is completed and the design phase of most of the components is finished. Many of them have already been ordered. After some delay the construction of the building has started in February 2015. The status of the various subprojects as well as a summary of current and future activities will be given. Major project milestones and details of the project time line will be finally introduced.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPWA018

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA010

First Test Results of the BERLinPro 2-cell Booster Cavities

2765

A. Burrill, W. Anders, A. Frahm, J. Knobloch, A. Neumann
HZB, Berlin, Germany
G. Ciovati, W.A. Clemens, P. Kneisel, L. Turlington
JLab, Newport News, Virginia, USA

The BERLinPro Energy Recovery Linac (ERL) is currently being built at Helmholtz-Zentrum Berlin in order to study the physics of operating a high current, a 100 mA, 50 MeV ERL utilizing all SRF cavity technology. This machine will utilize three unique SRF cryomodules for the photoinjector, booster and linac cryomodules respectively. The focus of this paper will be on the cavities contained within the booster cryomodule. Here there will be three 2-cell SRF cavities, based on the original design by Cornell University, but optimized to meet the needs of the project. All of the cavity fabrication, processing and testing was carried out at Jefferson Laboratory where 4 cavities were produced and the 3 cavities with the best RF performance were fitted with helium vessels for installation in the cryomodule. This paper will report on the test results of the cavities as measured in the vertical testing dewar at JLab after fabrication and again after outfitting with the helium vessels.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA010

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA011

First Horizontal Test Results of the HZB SRF Photoinjector for BERLinPro

2768

A. Burrill, W. Anders, A. Frahm, J. Knobloch, A. Neumann
HZB, Berlin, Germany
G. Ciovati, W.A. Clemens, P. Kneisel, L. Turlington
JLab, Newport News, Virginia, USA

The BERLinPro project, a small superconducting RF (SRF) c.w. energy recovery linac (ERL) is being built at Helmholtz-Zentrum Berlin in order to develop the technology required for operation of a high current, 100 mA, 50 MeV ERL. The electron source for the accelerator is a 1.4 cell SRF photoinjector fitted with a multi-alkali photocathode. As part of the HZB photoinjector development program three different SRF photoinjectors will be fabricated and tested. The photoinjector described herein is the second cavity that has been fabricated, and the first photoinjector designed for use with a multi-alkali photocathode. The photoinjector has been built and tested at JLab and subsequently shipped to HZB for testing in the horizontal test cryostat HoBiCaT prior to installation in the photoinjector cryomodule. This cryomodule will be used to measure the photocathode operation in a dedicated experiment called GunLab, the precursor to installation in the BERLinPro hall. This paper will report on the final results of the cavity installed in the helium vessel in the vertical testing dewar at Jefferson Lab as well as the first horizontal test in HoBiCaT

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA011

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA012

High-Q Cavity Operation: Study on the Thermoelectrically Induced Contribution to RF Surface Resistance

2771

J.M. Köszegi, J. Knobloch, O. Kugeler, A. Neumann, A.V. Vélez
HZB, Berlin, Germany

We present a study concerning the operation of a superconducting RF cavity (non-doped niobium) in horizontal testing with the focus on understanding the thermoelectrically induced contribution to the surface resistance. Starting in 2009, we suggested a means of reducing the residual resistance by warming up a cavity after initial cooldown to about 20K and cooling it down again. In subsequent studies we used this technique to manipulate the residual resistance by more than a factor of 2. We postulated that thermocurrents during cooldown generate additional trapped magnetic flux that impacts the cavity quality factor. Since several questions remained open, we present here a more extensive study including measurement of two additional passband modes of the 9-cell cavity that confirms the effect. We also discuss simulations that substantiate the claim. While the layout of the cavity LHe tank system is cylindrically symmetric, we show that the temperature dependence of the material parameters result in a non-symmetric current distribution. Hence a significant amount of magnetic flux can be generated at the RF surface resulting in an increased surface resistance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA012

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA013

Hom Damping Optimization Design Studies for BESSY VSR Cavities

2774

A.V. Vélez, H.-W. Glock, J. Knobloch, A. Neumann
HZB, Berlin, Germany

The BESSY VSR project is a future upgrade of the 3rd generation BESSY II light source. By using the same "standard" user optics, simultaneously long (ca. 15ps) and short (ca. 1.5ps) bunches will be stored. Thus, superconducting higher harmonic cavities of the fundamental 500 MHz at two frequencies need to be installed in the BESSY II storage ring. This work describes the optimizations studies for the Waveguide-based HOM dampers and the adjustable fundamental power coupler for the 1.5 GHz first SRF cavity prototype.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA013

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA036

Double-Cell Notch Filter for SRF Gun Investigations

2838

E.N. Zaplatin
FZJ, Jülich, Germany
A. Kanareykin
Euclid TechLabs, LLC, Solon, Ohio, USA
J. Knobloch, A. Neumann
HZB, Berlin, Germany
V.P. Yakovlev
Fermilab, Batavia, Illinois, USA

Some projects of SRF guns apply the design where the cathode can be easily and quickly removed. One of the disadvantages of this design is the RF power leakage from the accelerating gun cavity cells to the cathode housing that results in the excessive cathode heating. To minimize the RF power leak different kinds of choke filters are used to protect the cathode structure. These choke filters represent resonant circuits with a zero input impedance and installed at the entrance of the cathode structure that shunt the cathode housing. Still, since the choke filter frequency shift under working conditions is bigger than its bandwidth a filter tuning during assembly only in the warm stage seems insufficient and requires also fine-tuning during operation. To eliminate the problems of the choke filter fine-tuning and hence ensure its stability during operation, a combination of the resonance choke elements can be implemented. In the paper we demonstrate advantages of the double-cell notch filter using BERLinPro SRF gun cavity as an example with its simple design modifications.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA036

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)