IPAC2015 - List of Authors (Esposito, L.S.)

Paper	Title	Page
MOPJE058	FLUKA Modeling of the ESS Accelerator	434
	L. Lari, M. Eshraqi, L.S. Esposito, L. Tchelidze ESS, Lund, Sweden F. Cerutti, L.S. Esposito, L. Lari, A. Mereghetti CERN, Geneva, Switzerland
	In order to evaluate the energy deposition and radiation issues concerning the ESS accelerator, a FLUKA model of the machine has been created. The geometry of the superconducting beam line is built according to the machine optics, described in the TraceWin file and the CATIA drawings of the beam elements, using the LineBuilder tool developed at CERN. The objective is to create a flexible FLUKA model that is able to be adapted to the optimization of the optics, design modifications and machine integration constraints. Preliminary results are also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPJE058
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY028	Collimator Layouts for HL-LHC in the Experimental Insertions	2064
	R. Bruce, F. Cerutti, L.S. Esposito, J.M. Jowett, A. Lechner, E. Quaranta, S. Redaelli, M. Schaumann, E. Skordis, G.E. Steele CERN, Geneva, Switzerland H. Garcia Morales, R. Kwee-Hinzmann JAI, Egham, Surrey, United Kingdom
	This paper presents the layout of collimators for HL-LHC in the experimental insertions. On the incoming beam, we propose to install additional tertiary collimators to protect potential new aperture bottlenecks in cells 4 and 5, which in addition reduce the experimental background. For the outgoing beam, the layout of the present LHC with three physics debris absorbers gives sufficient protection for high-luminosity proton operation. However, collisional processes for heavy ions cause localized beam losses with the potential to quench magnets. To alleviate these losses, an installation of dispersion suppressor collimators is proposed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY028
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY067	Beam Induced Background Simulation Studies at IR1 with New High Luminosity LHC Layout	2184
	R. Kwee-Hinzmann, S.M. Gibson JAI, Egham, Surrey, United Kingdom R. Bruce, F. Cerutti, L.S. Esposito, A. Lechner CERN, Geneva, Switzerland S.M. Gibson Royal Holloway, University of London, Surrey, United Kingdom
	Funding: Research supported by FP7 HiLumi LHC – Grant agreement 284404 In the High Luminosity LHC (HL-LHC), the collimation system will be upgraded in the high-luminosity experimental regions. Additional protection is planned for the Q4 and Q5 magnets that are located further upstream of the tertiary collimators that protect the inner triplet magnets. We evaluate the effect of this proposed collimation layout for the incoming beam 1 on machine-induced background in the experimental area of IR1 (ATLAS). The main scenario is the round optics with β∗ of 15 cm, but a flat scenario is also briefly discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY067
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA045	Energy Deposition and DPA in the Superconducting Links for the HiLumi LHC project at the LHC Interaction Points	2865
	F. Broggi, A. Bignami, C. Santini INFN/LASA, Segrate (MI), Italy A. Ballarino, F. Cerutti, L.S. Esposito CERN, Geneva, Switzerland
	Funding: The work is part of HiLumi LHC Design Study, partly funded by the European Commission, GA 284404, and included in the High Luminosity LHC project. In the framework of the upgrade of the LHC machine, the powering of the LHC magnets foresees the removal of the power converters and distribution feedboxes from the tunnel and its location at the surface[1]. The Magnesium Diboride (MgB2) connecting lines in the tunnel will be exposed to the debris from 7+7 TeV p-p interaction. The Superconducting (SC) Links will arrive from the surface to the tunnel near the separation dipole, at about 80 m from the Interaction Point at IP1 and IP5. The Connection Box (where the cables of the SC Links are connected to the NbTi bus bar) will be close to the beam pipe. The debris and its effect on the MgB2 SC links in the connection box (energy deposition and displacement per atom) are presented. The effect of thermal neutrons on the Boron consumption and the contribution of the lithium nucleus and the alpha particle on the DPA are evaluated. The results are normalized to an integrated luminosity of 3000 fb-1, value that represents the LHC High Luminosity lifetime. The dose delivered to the SC Links is found to be below the damage limit. Further studies are necessary to correlate the induced displacement per atom to the superconducting properties.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA045
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

FLUKA Modeling of the ESS Accelerator

434

L. Lari, M. Eshraqi, L.S. Esposito, L. Tchelidze
ESS, Lund, Sweden
F. Cerutti, L.S. Esposito, L. Lari, A. Mereghetti
CERN, Geneva, Switzerland

In order to evaluate the energy deposition and radiation issues concerning the ESS accelerator, a FLUKA model of the machine has been created. The geometry of the superconducting beam line is built according to the machine optics, described in the TraceWin file and the CATIA drawings of the beam elements, using the LineBuilder tool developed at CERN. The objective is to create a flexible FLUKA model that is able to be adapted to the optimization of the optics, design modifications and machine integration constraints. Preliminary results are also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPJE058

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY028

Collimator Layouts for HL-LHC in the Experimental Insertions

2064

R. Bruce, F. Cerutti, L.S. Esposito, J.M. Jowett, A. Lechner, E. Quaranta, S. Redaelli, M. Schaumann, E. Skordis, G.E. Steele
CERN, Geneva, Switzerland
H. Garcia Morales, R. Kwee-Hinzmann
JAI, Egham, Surrey, United Kingdom

This paper presents the layout of collimators for HL-LHC in the experimental insertions. On the incoming beam, we propose to install additional tertiary collimators to protect potential new aperture bottlenecks in cells 4 and 5, which in addition reduce the experimental background. For the outgoing beam, the layout of the present LHC with three physics debris absorbers gives sufficient protection for high-luminosity proton operation. However, collisional processes for heavy ions cause localized beam losses with the potential to quench magnets. To alleviate these losses, an installation of dispersion suppressor collimators is proposed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY028

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTY067

Beam Induced Background Simulation Studies at IR1 with New High Luminosity LHC Layout

2184

R. Kwee-Hinzmann, S.M. Gibson
JAI, Egham, Surrey, United Kingdom
R. Bruce, F. Cerutti, L.S. Esposito, A. Lechner
CERN, Geneva, Switzerland
S.M. Gibson
Royal Holloway, University of London, Surrey, United Kingdom

Funding: Research supported by FP7 HiLumi LHC – Grant agreement 284404
In the High Luminosity LHC (HL-LHC), the collimation system will be upgraded in the high-luminosity experimental regions. Additional protection is planned for the Q4 and Q5 magnets that are located further upstream of the tertiary collimators that protect the inner triplet magnets. We evaluate the effect of this proposed collimation layout for the incoming beam 1 on machine-induced background in the experimental area of IR1 (ATLAS). The main scenario is the round optics with β∗ of 15 cm, but a flat scenario is also briefly discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPTY067

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMA045

Energy Deposition and DPA in the Superconducting Links for the HiLumi LHC project at the LHC Interaction Points

2865

F. Broggi, A. Bignami, C. Santini
INFN/LASA, Segrate (MI), Italy
A. Ballarino, F. Cerutti, L.S. Esposito
CERN, Geneva, Switzerland

Funding: The work is part of HiLumi LHC Design Study, partly funded by the European Commission, GA 284404, and included in the High Luminosity LHC project.
In the framework of the upgrade of the LHC machine, the powering of the LHC magnets foresees the removal of the power converters and distribution feedboxes from the tunnel and its location at the surface[1]. The Magnesium Diboride (MgB2) connecting lines in the tunnel will be exposed to the debris from 7+7 TeV p-p interaction. The Superconducting (SC) Links will arrive from the surface to the tunnel near the separation dipole, at about 80 m from the Interaction Point at IP1 and IP5. The Connection Box (where the cables of the SC Links are connected to the NbTi bus bar) will be close to the beam pipe. The debris and its effect on the MgB2 SC links in the connection box (energy deposition and displacement per atom) are presented. The effect of thermal neutrons on the Boron consumption and the contribution of the lithium nucleus and the alpha particle on the DPA are evaluated. The results are normalized to an integrated luminosity of 3000 fb-1, value that represents the LHC High Luminosity lifetime. The dose delivered to the SC Links is found to be below the damage limit. Further studies are necessary to correlate the induced displacement per atom to the superconducting properties.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPMA045

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)