IPAC2015 - List of Authors (Ehrlichman, M.P.)

Paper	Title	Page
MOPJE074	Optimizing SLS-2 Nonlinearities Using a Multi-Objective Genetic Optimizer	486
	M.P. Ehrlichman, M. Aiba, A. Streun PSI, Villigen PSI, Switzerland
	An upgrade to the SLS is currently under development. This upgrade will likely utilize the same hall and same machine circumference, 288 m, of the SLS. Achieving a sufficiently low emittance with such a small circumference requires tight focusing and low dispersion. These conditions make chromaticity correction difficult and minimization of 1st and 2nd order non-linear driving terms does not yield sufficient dynamic aperture and Touschek lifetime. In this proceeding, we discuss the multi-objective genetic optimization method being implemented at SLS to aid the design of a chromaticity correction scheme for SLS2.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPJE074
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE045	Round Beam Operation in Electron Storage Rings and generalisation of Mobius accelerator	1716
	M. Aiba, M.P. Ehrlichman, A. Streun PSI, Villigen PSI, Switzerland
	A better performing photon beam can be obtained from light sources when the eletron beam is formed into a "round beam" rather than a flat beam. It is realised by equally distributing the natural emittance into the horizontal and vertical planes. There are a few approaches for the emittance distribution, and we explored the so-called Mobius accelerator scheme, where a transverse (horizontal-vertical) emittance exchange results at each turn of beam revolution. The original proposal of Mobius accelerator was based on a set of five succesive skew quadruples, requiring a dedicated long straight section. We generalise the Mobius accelerator section to find more convenient configurations. Applications to a light source storage ring lattice and some tracking results are also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE045
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE047	Design Studies for an Upgrade of the SLS Storage Ring	1724
	A. Streun, M. Aiba, M. Böge, M.P. Ehrlichman, Á. Saá Hernández PSI, Villigen PSI, Switzerland
	An upgrade of the Swiss Light Source (SLS) would replace the existing storage ring by a low aperture multibend achromat lattice providing an emittance of about 100–200 pm at 2.4 GeV, while maintaining the hall, the beam lines and the injector. Since emittance scales inversely cubically with the number of lattice cells, an SLS upgrade is challenged by the comparatively small ring circumference of only 288 m. A new concept for a compact low emittance lattice is based on longitudinal gradient bending magnets for emittance minimization and on anti-bends (i.e bends of opposite field polarity) to disentangle dispersion and horizontal beta function in order to provide the optimum matching to the longitudinal gradient bends while minimizing the contribution to chromaticity.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE047
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Optimizing SLS-2 Nonlinearities Using a Multi-Objective Genetic Optimizer

486

M.P. Ehrlichman, M. Aiba, A. Streun
PSI, Villigen PSI, Switzerland

An upgrade to the SLS is currently under development. This upgrade will likely utilize the same hall and same machine circumference, 288 m, of the SLS. Achieving a sufficiently low emittance with such a small circumference requires tight focusing and low dispersion. These conditions make chromaticity correction difficult and minimization of 1st and 2nd order non-linear driving terms does not yield sufficient dynamic aperture and Touschek lifetime. In this proceeding, we discuss the multi-objective genetic optimization method being implemented at SLS to aid the design of a chromaticity correction scheme for SLS2.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPJE074

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE045

Round Beam Operation in Electron Storage Rings and generalisation of Mobius accelerator

1716

M. Aiba, M.P. Ehrlichman, A. Streun
PSI, Villigen PSI, Switzerland

A better performing photon beam can be obtained from light sources when the eletron beam is formed into a "round beam" rather than a flat beam. It is realised by equally distributing the natural emittance into the horizontal and vertical planes. There are a few approaches for the emittance distribution, and we explored the so-called Mobius accelerator scheme, where a transverse (horizontal-vertical) emittance exchange results at each turn of beam revolution. The original proposal of Mobius accelerator was based on a set of five succesive skew quadruples, requiring a dedicated long straight section. We generalise the Mobius accelerator section to find more convenient configurations. Applications to a light source storage ring lattice and some tracking results are also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE045

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPJE047

Design Studies for an Upgrade of the SLS Storage Ring

1724

A. Streun, M. Aiba, M. Böge, M.P. Ehrlichman, Á. Saá Hernández
PSI, Villigen PSI, Switzerland

An upgrade of the Swiss Light Source (SLS) would replace the existing storage ring by a low aperture multibend achromat lattice providing an emittance of about 100–200 pm at 2.4 GeV, while maintaining the hall, the beam lines and the injector. Since emittance scales inversely cubically with the number of lattice cells, an SLS upgrade is challenged by the comparatively small ring circumference of only 288 m. A new concept for a compact low emittance lattice is based on longitudinal gradient bending magnets for emittance minimization and on anti-bends (i.e bends of opposite field polarity) to disentangle dispersion and horizontal beta function in order to provide the optimum matching to the longitudinal gradient bends while minimizing the contribution to chromaticity.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE047

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)