IPAC2015 - List of Authors (Dupire, P.A.)

Paper	Title	Page
WEPTY042	Pulsed Power Systems for ESS Klystrons	3368
	M.P.J. Gaudreau, M.K. Kempkes, I. Roth Diversified Technologies, Inc., Bedford, Massachusetts, USA P.A. Dupire Sigma Phi Electronics, Wissembourg, France J.D. Holzmann Sigmaphi, Vannes, France
	Funding: DE-SC0004254 Under an SBIR from DOE, Diversified Technologies, Inc. (DTI) has designed and built an advanced, high-voltage solid-state modulator for long pulse klystrons for ESS. In 2014, DTI, in partnership with SigmaPhi Electronics, received two contracts for production and installation of this design for ESS-class modulators, which will be used for the testing and conditioning of ESS klystron tubes and testing of RF components. This modulator design uses a hybrid configuration (solid state switch and pulse transformer) with an advanced switching regulator to maintain a very flat voltage into the klystron over multi-millisecond pulses. This paper will describe the design and testing of these modulators, and the status of their installation. The major development introduced in this design is that the millisecond-long pulses produce a droop voltage of about 10% with a reasonably-sized capacitor bank–much larger than the 1% droop required. To eliminate the droop without a large and expensive capacitor bank, the modulator uses a non-dissipative regulator.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPTY042
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Pulsed Power Systems for ESS Klystrons

3368

M.P.J. Gaudreau, M.K. Kempkes, I. Roth
Diversified Technologies, Inc., Bedford, Massachusetts, USA
P.A. Dupire
Sigma Phi Electronics, Wissembourg, France
J.D. Holzmann
Sigmaphi, Vannes, France

Funding: DE-SC0004254
Under an SBIR from DOE, Diversified Technologies, Inc. (DTI) has designed and built an advanced, high-voltage solid-state modulator for long pulse klystrons for ESS. In 2014, DTI, in partnership with SigmaPhi Electronics, received two contracts for production and installation of this design for ESS-class modulators, which will be used for the testing and conditioning of ESS klystron tubes and testing of RF components. This modulator design uses a hybrid configuration (solid state switch and pulse transformer) with an advanced switching regulator to maintain a very flat voltage into the klystron over multi-millisecond pulses. This paper will describe the design and testing of these modulators, and the status of their installation. The major development introduced in this design is that the millisecond-long pulses produce a droop voltage of about 10% with a reasonably-sized capacitor bank–much larger than the 1% droop required. To eliminate the droop without a large and expensive capacitor bank, the modulator uses a non-dissipative regulator.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPTY042

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)