IPAC2015 - List of Authors (Cheng, W.X.)

Paper	Title	Page
MOPJE053	NSLS-II Beam Lifetime Measurements and Modeling	416
	B. Podobedov, W.X. Cheng, Y. Hidaka, H.-C. Hseuh, G.M. Wang BNL, Upton, Long Island, New York, USA
	NSLS-II is a recently constructed 3 GeV synchrotron light source with design horizontal emittance values in sub-nm range. Achieving good beam lifetime is critically important for NSLS-II as it is closely tied in to such important operational aspects as top-off injection frequency, injector components wear, radiation protection and control, and others. In this paper we present lifetime-related commissioning results, describe our present understanding of beam lifetime at NSLS-II and extrapolate our models to the fully built-up machine operating at 500 mA design beam current.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPJE053
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMN021	NSLS-II Storage Ring BPM Button Development	748
	A. Blednykh, B. Bacha, G. Bassi, W.X. Cheng, C. Hetzel, B.N. Kosciuk, D. Padrazo, O. Singh BNL, Upton, Long Island, New York, USA
	Funding: Work supported by DOE contract DE-AC02-98CH10886 The NSLS-II BPM Button design and its development process have been described. Subjects discussed include BPM Button impedance optimization, design and construction, production, BPM Button selection and a first temperature measurements at 200mA average current within 1200 bunches.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPMN021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUAB2	First Collective Effects Measurements in NSLS-II with ID's	1332
	A. Blednykh, B. Bacha, G. Bassi, W.X. Cheng, J. Choi, Y. Hidaka, Y. Li, B. Podobedov, T.V. Shaftan, V. Smalyuk, T. Tanabe, G.M. Wang, F.J. Willeke, L.-H. Yu BNL, Upton, Long Island, New York, USA
	Funding: Work supported by DOE contract DE-AC02-98CH10886. As another important milestone towards the final goal to store an average current of 500mA, the average current of 200mA, distributed within ~1000 bunches, was recently achieved in the NSLS-II storage ring after the installation of three Damping Wigglers and four In-Vacuum Undulators. First measurements of the collective effects and instability thresholds, both in single- and multi-bunch mode, are discussed.
	Slides TUAB2 [2.691 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUAB2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMA050	NSLS-II Injector Commissioning and Initial Operation	1944
	E.B. Blum, B. Bacha, G. Bassi, J. Bengtsson, A. Blednykh, S. Buda, W.X. Cheng, J. Choi, J. Cupolo, R. D'Alsace, M.A. Davidsaver, J.H. De Long, L. Doom, D.J. Durfee, R.P. Fliller, M. Fulkerson, G. Ganetis, F. Gao, C. Gardner, W. Guo, R. Heese, Y. Hidaka, Y. Hu, M.P. Johanson, B.N. Kosciuk, S. Kowalski, S.L. Kramer, S. Krinsky, Y. Li, W. Louie, M.A. Maggipinto, P. Marino, J. Mead, J. Oliva, D. Padrazo, K. Pedersen, B. Podobedov, R.S. Rainer, J. Rose, M. Santana, S. Seletskiy, T.V. Shaftan, O. Singh, P. Singh, V.V. Smaluk, R.M. Smith, T. Summers, J. Tagger, Y. Tian, W.H. Wahl, G.M. Wang, G.J. Weiner, F.J. Willeke, L. Yang, X. Yang, E. Zeitler, E. Zitvogel, P. Zuhoski BNL, Upton, Long Island, New York, USA A. Akimov, P.B. Cheblakov, I.N. Churkin, A.A. Derbenev, S.M. Gurov, S.E. Karnaev, V.A. Kiselev, A.A. Korepanov, E.B. Levichev, S.V. Sinyatkin, A.N. Zhuravlev BINP SB RAS, Novosibirsk, Russia
	The injector for the National Synchrotron Light Source II storage ring consists of a 3 GeV booster synchrotron and a 200 MeV S-band linac. The linac was designed to produce either a single bunch with a charge of 0.5 nC of electrons or a train of bunches up to 300 ns long containing a total charge of 15 nC. The booster was designed to accelerate up to 15 nC each cycle. Linac commissioning was completed in April 2012. Booster commissioning was started in November 2013 and completed in March 2014. All of the significant design goals were satisfied including beam emittance, energy spread, and transport efficiency. While the maximum booster charge accelerated was only 10 nC this has proven to be more than sufficient for storage ring commissioning. The injector has operated reliably during storage ring operation since then. Results will be presented showing measurements of injector operating parameters achieved during commissioning and initial operation. Operating experience and reliability during the first year of NSLS-II operation will be discussed.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPMA050
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMA053	Experience with First Turns Commissioning in NSLS-II Storage Ring	1950
	S. Seletskiy, G. Bassi, J. Bengtsson, A. Blednykh, E.B. Blum, W.X. Cheng, J. Choi, R.P. Fliller, W. Guo, R. Heese, Y. Hidaka, S.L. Kramer, Y. Li, B. Podobedov, T.V. Shaftan, G.M. Wang, F.J. Willeke, L. Yang, X. Yang BNL, Upton, Long Island, New York, USA
	In this paper we describe our experience with commissioning of the first turns in the NSLS-II storage ring. We discuss the problems that we encountered and show how applying a dedicated first turns commissioning software allowed us to diagnose and resolve these problems.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPMA053
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA004	NSLS-II Storage Ring Injection Optimization	1968
	G.M. Wang, E.B. Blum, W.X. Cheng, J. Choi, Y. Li, S. Seletskiy, T.V. Shaftan, Y. Tian, L. Yang, L.-H. Yu BNL, Upton, Long Island, New York, USA
	The National Synchrotron Light Source II (NSLS-II) is a state of the art 3 GeV third generation light source at Brookhaven National Laboratory. The SR is designed to work in top-off injection mode. The injection straight includes a septum and four fast kicker magnets with independent amplitude and timing control. The beam injection is designed as 9.5 mm off-axis in x plane and on-axis injection in y plane. To capture the injected beam within the SR acceptance for high injection efficiency, it requires 6-D phase space match. Besides that, the fast kickers formed local bump is also required to be locally to minimize the injected beam extra betatron oscillation and keep the stored beam disturbance within the specification, 10% beam size to minimize the injection transient. This paper will present the beam results before and after optimization.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPHA004
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA005	Tools for NSLS II Commissioning	1971
	G.M. Wang, G. Bassi, A. Blednykh, W.X. Cheng, J. Choi, L.R. Dalesio, M.A. Davidsaver, J.H. De Long, K. Ha, Y. Hidaka, Y. Hu, Y. Li, D. Padrazo, S. Seletskiy, T.V. Shaftan, G. Shen, K. Shroff, O. Singh, T. Summers, Y. Tian, F.J. Willeke, H. Xu, L. Yang, X. Yang BNL, Upton, Long Island, New York, USA
	The National Synchrotron Light Source II (NSLS-II) is a state of the art 3 GeV third generation light source at Brookhaven National Laboratory. As many facilities worldwide, NSLS II uses the EPICS control system to monitor and control all accelerator hardware. Control system studio (CSS) is used for simple tasks such as monitoring, display, setting of PVs. browsing the historical data, et. al. For more complex accelerator physics applications, a collection of scripts are mainly written in Python and part from Matlab during commissioning. With the close collaboration and fully support from control group, more and more CSS features were developed for operation convenience and several high level applications are interfaced with users in CSS panels for daily use based on softiocs. This paper will present the tools that we have been using for commissioning.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPHA005
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA006	NSLS-II Storage Ring Insertion Device and Front-End Commissioning	1974
	G.M. Wang, C. Amundsen, G. Bassi, J. Bengtsson, A. Blednykh, E.B. Blum, W.X. Cheng, J. Choi, O.V. Chubar, T.M. Corwin, M.A. Davidsaver, L. Doom, W. Guo, D.A. Harder, P. He, Y. Hidaka, Y. Hu, P. Ilinski, C.A. Kitegi, S.L. Kramer, Y. Li, M. Musardo, D. Padrazo, B. Podobedov, K. Qian, R.S. Rainer, J. Rank, S. Seletskiy, T.V. Shaftan, S.K. Sharma, O. Singh, V. Smalyuk, R.M. Smith, T. Summers, T. Tanabe, F.J. Willeke, L. Yang, X. Yang, L.-H. Yu BNL, Upton, Long Island, New York, USA
	The National Synchrotron Light Source II (NSLS-II) is a state of the art 3 GeV third generation light source at Brookhaven National Laboratory. In the spring 2014, the storage ring was commissioning up to 50 mA without insertion device. In the fall, the project beamlines, includes seven insertion devices on six ID ports were commissioned within two and a half months. These beamlines consist of IXS, HXN, CSX-1, CSX-2, CHX, SRX, and XPD-1, from the radiation sources elliptically polarizing undulator (EPU), damping wiggler (DW) and in vacuum undulator (IVU) to cover the VUV through the very hard x-ray range. In this paper, a number of commissioning and operation experiences are discussed here, such as injection, lifetime, ID residual field and compensation, source point stability, beam alignment and tools for control, monitor and beam protection.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPHA006
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA007	NSLS II Booster Extended Integration Test	1977
	G.M. Wang, B. Bacha, A. Blednykh, E.B. Blum, W.X. Cheng, J. Choi, L.R. Dalesio, M.A. Davidsaver, J.H. De Long, R.P. Fliller, G. Ganetis, W. Guo, K. Ha, Y. Hu, W. Louie, T.V. Shaftan, G. Shen, O. Singh, Y. Tian, F.J. Willeke, L. Yang, X. Yang BNL, Upton, Long Island, New York, USA P.B. Cheblakov, A.A. Derbenev, A.I. Erokhin, S.E. Karnaev, S.V. Sinyatkin BINP SB RAS, Novosibirsk, Russia V.V. Smaluk DLS, Oxfordshire, United Kingdom
	The National Synchrotron Light Source II (NSLS-II) is a state of the art 3 GeV third generation light source at Brookhaven National Laboratory. While the installation activities in the booster-synchrotron are nearly completed and waiting for the authorization to start the booster commissioning, the injector and accelerator physics group have engaged into the Integrated Testing phase. We did the booster commissioning with simulated beam signals, called extended integrated testing (EIT) to prepare for the booster ring commissioning. It is to make sure the device function along with utilities, timing system and control system, to calibrate diagnostics system, debug High Level Applications, test and optimize all the operation screens to reduce the potential problems during booster commissioning with beam.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPHA007
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

NSLS-II Beam Lifetime Measurements and Modeling

416

B. Podobedov, W.X. Cheng, Y. Hidaka, H.-C. Hseuh, G.M. Wang
BNL, Upton, Long Island, New York, USA

NSLS-II is a recently constructed 3 GeV synchrotron light source with design horizontal emittance values in sub-nm range. Achieving good beam lifetime is critically important for NSLS-II as it is closely tied in to such important operational aspects as top-off injection frequency, injector components wear, radiation protection and control, and others. In this paper we present lifetime-related commissioning results, describe our present understanding of beam lifetime at NSLS-II and extrapolate our models to the fully built-up machine operating at 500 mA design beam current.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPJE053

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMN021

NSLS-II Storage Ring BPM Button Development

748

A. Blednykh, B. Bacha, G. Bassi, W.X. Cheng, C. Hetzel, B.N. Kosciuk, D. Padrazo, O. Singh
BNL, Upton, Long Island, New York, USA

Funding: Work supported by DOE contract DE-AC02-98CH10886
The NSLS-II BPM Button design and its development process have been described. Subjects discussed include BPM Button impedance optimization, design and construction, production, BPM Button selection and a first temperature measurements at 200mA average current within 1200 bunches.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPMN021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUAB2

First Collective Effects Measurements in NSLS-II with ID's

1332

A. Blednykh, B. Bacha, G. Bassi, W.X. Cheng, J. Choi, Y. Hidaka, Y. Li, B. Podobedov, T.V. Shaftan, V. Smalyuk, T. Tanabe, G.M. Wang, F.J. Willeke, L.-H. Yu
BNL, Upton, Long Island, New York, USA

Funding: Work supported by DOE contract DE-AC02-98CH10886.
As another important milestone towards the final goal to store an average current of 500mA, the average current of 200mA, distributed within ~1000 bunches, was recently achieved in the NSLS-II storage ring after the installation of three Damping Wigglers and four In-Vacuum Undulators. First measurements of the collective effects and instability thresholds, both in single- and multi-bunch mode, are discussed.

Slides TUAB2 [2.691 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUAB2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMA050

NSLS-II Injector Commissioning and Initial Operation

1944

E.B. Blum, B. Bacha, G. Bassi, J. Bengtsson, A. Blednykh, S. Buda, W.X. Cheng, J. Choi, J. Cupolo, R. D'Alsace, M.A. Davidsaver, J.H. De Long, L. Doom, D.J. Durfee, R.P. Fliller, M. Fulkerson, G. Ganetis, F. Gao, C. Gardner, W. Guo, R. Heese, Y. Hidaka, Y. Hu, M.P. Johanson, B.N. Kosciuk, S. Kowalski, S.L. Kramer, S. Krinsky, Y. Li, W. Louie, M.A. Maggipinto, P. Marino, J. Mead, J. Oliva, D. Padrazo, K. Pedersen, B. Podobedov, R.S. Rainer, J. Rose, M. Santana, S. Seletskiy, T.V. Shaftan, O. Singh, P. Singh, V.V. Smaluk, R.M. Smith, T. Summers, J. Tagger, Y. Tian, W.H. Wahl, G.M. Wang, G.J. Weiner, F.J. Willeke, L. Yang, X. Yang, E. Zeitler, E. Zitvogel, P. Zuhoski
BNL, Upton, Long Island, New York, USA
A. Akimov, P.B. Cheblakov, I.N. Churkin, A.A. Derbenev, S.M. Gurov, S.E. Karnaev, V.A. Kiselev, A.A. Korepanov, E.B. Levichev, S.V. Sinyatkin, A.N. Zhuravlev
BINP SB RAS, Novosibirsk, Russia

The injector for the National Synchrotron Light Source II storage ring consists of a 3 GeV booster synchrotron and a 200 MeV S-band linac. The linac was designed to produce either a single bunch with a charge of 0.5 nC of electrons or a train of bunches up to 300 ns long containing a total charge of 15 nC. The booster was designed to accelerate up to 15 nC each cycle. Linac commissioning was completed in April 2012. Booster commissioning was started in November 2013 and completed in March 2014. All of the significant design goals were satisfied including beam emittance, energy spread, and transport efficiency. While the maximum booster charge accelerated was only 10 nC this has proven to be more than sufficient for storage ring commissioning. The injector has operated reliably during storage ring operation since then. Results will be presented showing measurements of injector operating parameters achieved during commissioning and initial operation. Operating experience and reliability during the first year of NSLS-II operation will be discussed.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPMA050

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMA053

Experience with First Turns Commissioning in NSLS-II Storage Ring

1950

S. Seletskiy, G. Bassi, J. Bengtsson, A. Blednykh, E.B. Blum, W.X. Cheng, J. Choi, R.P. Fliller, W. Guo, R. Heese, Y. Hidaka, S.L. Kramer, Y. Li, B. Podobedov, T.V. Shaftan, G.M. Wang, F.J. Willeke, L. Yang, X. Yang
BNL, Upton, Long Island, New York, USA

In this paper we describe our experience with commissioning of the first turns in the NSLS-II storage ring. We discuss the problems that we encountered and show how applying a dedicated first turns commissioning software allowed us to diagnose and resolve these problems.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPMA053

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA004

NSLS-II Storage Ring Injection Optimization

1968

G.M. Wang, E.B. Blum, W.X. Cheng, J. Choi, Y. Li, S. Seletskiy, T.V. Shaftan, Y. Tian, L. Yang, L.-H. Yu
BNL, Upton, Long Island, New York, USA

The National Synchrotron Light Source II (NSLS-II) is a state of the art 3 GeV third generation light source at Brookhaven National Laboratory. The SR is designed to work in top-off injection mode. The injection straight includes a septum and four fast kicker magnets with independent amplitude and timing control. The beam injection is designed as 9.5 mm off-axis in x plane and on-axis injection in y plane. To capture the injected beam within the SR acceptance for high injection efficiency, it requires 6-D phase space match. Besides that, the fast kickers formed local bump is also required to be locally to minimize the injected beam extra betatron oscillation and keep the stored beam disturbance within the specification, 10% beam size to minimize the injection transient. This paper will present the beam results before and after optimization.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPHA004

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA005

Tools for NSLS II Commissioning

1971

G.M. Wang, G. Bassi, A. Blednykh, W.X. Cheng, J. Choi, L.R. Dalesio, M.A. Davidsaver, J.H. De Long, K. Ha, Y. Hidaka, Y. Hu, Y. Li, D. Padrazo, S. Seletskiy, T.V. Shaftan, G. Shen, K. Shroff, O. Singh, T. Summers, Y. Tian, F.J. Willeke, H. Xu, L. Yang, X. Yang
BNL, Upton, Long Island, New York, USA

The National Synchrotron Light Source II (NSLS-II) is a state of the art 3 GeV third generation light source at Brookhaven National Laboratory. As many facilities worldwide, NSLS II uses the EPICS control system to monitor and control all accelerator hardware. Control system studio (CSS) is used for simple tasks such as monitoring, display, setting of PVs. browsing the historical data, et. al. For more complex accelerator physics applications, a collection of scripts are mainly written in Python and part from Matlab during commissioning. With the close collaboration and fully support from control group, more and more CSS features were developed for operation convenience and several high level applications are interfaced with users in CSS panels for daily use based on softiocs. This paper will present the tools that we have been using for commissioning.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPHA005

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA006

NSLS-II Storage Ring Insertion Device and Front-End Commissioning

1974

G.M. Wang, C. Amundsen, G. Bassi, J. Bengtsson, A. Blednykh, E.B. Blum, W.X. Cheng, J. Choi, O.V. Chubar, T.M. Corwin, M.A. Davidsaver, L. Doom, W. Guo, D.A. Harder, P. He, Y. Hidaka, Y. Hu, P. Ilinski, C.A. Kitegi, S.L. Kramer, Y. Li, M. Musardo, D. Padrazo, B. Podobedov, K. Qian, R.S. Rainer, J. Rank, S. Seletskiy, T.V. Shaftan, S.K. Sharma, O. Singh, V. Smalyuk, R.M. Smith, T. Summers, T. Tanabe, F.J. Willeke, L. Yang, X. Yang, L.-H. Yu
BNL, Upton, Long Island, New York, USA

The National Synchrotron Light Source II (NSLS-II) is a state of the art 3 GeV third generation light source at Brookhaven National Laboratory. In the spring 2014, the storage ring was commissioning up to 50 mA without insertion device. In the fall, the project beamlines, includes seven insertion devices on six ID ports were commissioned within two and a half months. These beamlines consist of IXS, HXN, CSX-1, CSX-2, CHX, SRX, and XPD-1, from the radiation sources elliptically polarizing undulator (EPU), damping wiggler (DW) and in vacuum undulator (IVU) to cover the VUV through the very hard x-ray range. In this paper, a number of commissioning and operation experiences are discussed here, such as injection, lifetime, ID residual field and compensation, source point stability, beam alignment and tools for control, monitor and beam protection.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPHA006

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA007

NSLS II Booster Extended Integration Test

1977

G.M. Wang, B. Bacha, A. Blednykh, E.B. Blum, W.X. Cheng, J. Choi, L.R. Dalesio, M.A. Davidsaver, J.H. De Long, R.P. Fliller, G. Ganetis, W. Guo, K. Ha, Y. Hu, W. Louie, T.V. Shaftan, G. Shen, O. Singh, Y. Tian, F.J. Willeke, L. Yang, X. Yang
BNL, Upton, Long Island, New York, USA
P.B. Cheblakov, A.A. Derbenev, A.I. Erokhin, S.E. Karnaev, S.V. Sinyatkin
BINP SB RAS, Novosibirsk, Russia
V.V. Smaluk
DLS, Oxfordshire, United Kingdom

The National Synchrotron Light Source II (NSLS-II) is a state of the art 3 GeV third generation light source at Brookhaven National Laboratory. While the installation activities in the booster-synchrotron are nearly completed and waiting for the authorization to start the booster commissioning, the injector and accelerator physics group have engaged into the Integrated Testing phase. We did the booster commissioning with simulated beam signals, called extended integrated testing (EIT) to prepare for the booster ring commissioning. It is to make sure the device function along with utilities, timing system and control system, to calibrate diagnostics system, debug High Level Applications, test and optimize all the operation screens to reduce the potential problems during booster commissioning with beam.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPHA007

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)