IPAC2015 - List of Authors (Calvey, J.R.)

Paper	Title	Page
TUPJE079	High Charge Development of the APS Injector for an MBA Upgrade	1828
	C. Yao, M. Borland, J.R. Calvey, K.C. Harkay, D. Horan, R.R. Lindberg, N. Sereno, H. Shang, X. Sun, J. Wang ANL, Argonne, Illinois, USA
	Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357. The APS MBA (multi-bend achromat) upgrade storage ring will employ a “swap out” injection scheme and requires a single-bunch beam with up to 20 nC from the injector. The APS injector, which consists of a 450-MeV linac, a particle accumulator ring (PAR), and a 7-GeV synchrotron (Booster), was originally designed to provide up to 6 nC of beam charge. High charge injector study is part of the APS upgrade R&D that explores the capabilities and limitations of the injector through machine studies and simulations, and identifies necessary upgrades in order to meet the requirements of the MBA upgrade. In the past year we performed PAR and booster high charge studies, implemented new ramp correction of the booster rap supplies, explored non-linear chromatic correction of the booster, etc. This report presents the results and findings.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE079
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMA056	Measurement and Modeling of Single Bunch Wake Field Effects in CESR	681
	J.R. Calvey, M.G. Billing, W. Hartung, J.D. Perrin, D. L. Rubin, D. Sagan, S. Wang Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Funding: Work supported by NSF PHY-1416318 and NSF DMR 1332208. This research used the National Energy Research Scientific Computing Center, which is supported by DOE Contract No. DE-AC02-05CH11231. Short-range wake fields have been incorporated into a Bmad-based particle tracking code in order to assess their contribution to current-dependent emittance growth, tune shift, and single bunch instabilities. The wakes are computed for CESR vacuum components using the T3P modeling software. Simulation results are compared with measurements of bunch length, vertical beam size, and coherent tune shift. Additionally, we use insertable scrapers to vary the transverse wake and measure the effect on the beam. We show that a vertical emittance increase at high current may be due to a transverse monopole wake, originating in the lump pump slots throughout CESR.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPMA056
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

High Charge Development of the APS Injector for an MBA Upgrade

1828

C. Yao, M. Borland, J.R. Calvey, K.C. Harkay, D. Horan, R.R. Lindberg, N. Sereno, H. Shang, X. Sun, J. Wang
ANL, Argonne, Illinois, USA

Funding: Work supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357.
The APS MBA (multi-bend achromat) upgrade storage ring will employ a “swap out” injection scheme and requires a single-bunch beam with up to 20 nC from the injector. The APS injector, which consists of a 450-MeV linac, a particle accumulator ring (PAR), and a 7-GeV synchrotron (Booster), was originally designed to provide up to 6 nC of beam charge. High charge injector study is part of the APS upgrade R&D that explores the capabilities and limitations of the injector through machine studies and simulations, and identifies necessary upgrades in order to meet the requirements of the MBA upgrade. In the past year we performed PAR and booster high charge studies, implemented new ramp correction of the booster rap supplies, explored non-linear chromatic correction of the booster, etc. This report presents the results and findings.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-TUPJE079

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMA056

Measurement and Modeling of Single Bunch Wake Field Effects in CESR

681

J.R. Calvey, M.G. Billing, W. Hartung, J.D. Perrin, D. L. Rubin, D. Sagan, S. Wang
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Funding: Work supported by NSF PHY-1416318 and NSF DMR 1332208. This research used the National Energy Research Scientific Computing Center, which is supported by DOE Contract No. DE-AC02-05CH11231.
Short-range wake fields have been incorporated into a Bmad-based particle tracking code in order to assess their contribution to current-dependent emittance growth, tune shift, and single bunch instabilities. The wakes are computed for CESR vacuum components using the T3P modeling software. Simulation results are compared with measurements of bunch length, vertical beam size, and coherent tune shift. Additionally, we use insertable scrapers to vary the transverse wake and measure the effect on the beam. We show that a vertical emittance increase at high current may be due to a transverse monopole wake, originating in the lump pump slots throughout CESR.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOPMA056

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)