IPAC2015 - List of Authors (Calaga, R.)

Paper	Title	Page
MOBD2	Design and Prototyping of HL-LHC Double Quarter Wave Crab Cavities for SPS Test	64
	S. Verdú-Andrés, S.A. Belomestnykh, I. Ben-Zvi, J. Skaritka, Q. Wu, B. P. Xiao BNL, Upton, Long Island, New York, USA L. Alberty, K. Artoos, R. Calaga, O. Capatina, T. Capelli, F. Carra, N. Kuder, R. Leuxe, C. Zanoni CERN, Geneva, Switzerland S.A. Belomestnykh, I. Ben-Zvi Stony Brook University, Stony Brook, USA Z. Li SLAC, Menlo Park, California, USA A. Ratti LBNL, Berkeley, California, USA
	Funding: Work supported by US DOE via US LARP program, through BSA LLC contract No.DE-AC02-98CH10886 and by EU FP7 HiLumi LHC grant No.284404. Used NERSC resources by US DOE contract No.DE-AC02-05CH11231. The LHC high luminosity project envisages the use of the crabbing technique for increasing and levelling the LHC luminosity. Double-Quarter Wave (DQW) resonators are compact cavities especially designed to meet the technical and performance requirements for LHC beam crabbing. A couple of DQW crab cavities are under preparation and will be tested with beam in the Super Proton Synchrotron (SPS) of CERN by 2017. This paper describes the design and prototyping of DQW crab cavities for the SPS test.
	Slides MOBD2 [6.909 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOBD2
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWI059	Higher Order Mode Filter Design for Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade	3627
	B. P. Xiao, S.A. Belomestnykh, I. Ben-Zvi, J. Skaritka, S. Verdú-Andrés, Q. Wu BNL, Upton, Long Island, New York, USA S.A. Belomestnykh, I. Ben-Zvi Stony Brook University, Stony Brook, USA G. Burt, B.D.S. Hall Cockcroft Institute, Lancaster University, Lancaster, United Kingdom G. Burt Lancaster University, Lancaster, United Kingdom R. Calaga, O. Capatina CERN, Geneva, Switzerland T.J. Jones STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
	Funding: Work partly supported by US LARP, by US DOE under contract No. DE-AC02-05CH11231 and through BSA under contract No. DE-AC02-98CH10886. Research supported by EU FP7 HiLumi LHC - Grant Agreement 284404. A double quarter wave crab cavity (DQWCC) was designed for the Large Hadron Collider (LHC) luminosity upgrade. A compact Higher Order Mode (HOM) filter with wide stop band at the deflecting mode is developed for this cavity. Multi-physics finite element simulation results are presented. The integration of this design to the cavity cryomodule is described.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPWI059
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWI060	Cryogenic Test of Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade	3630
	B. P. Xiao, S.A. Belomestnykh, I. Ben-Zvi, C. Cullen, L.R. Hammons, C. Marques, J. Skaritka, S. Verdú-Andrés, Q. Wu BNL, Upton, Long Island, New York, USA L. Alberty, R. Calaga, O. Capatina CERN, Geneva, Switzerland S.A. Belomestnykh, I. Ben-Zvi Stony Brook University, Stony Brook, USA Z. Li SLAC, Menlo Park, California, USA
	Funding: Work partly supported by US LARP, by US DOE under contract No. DE-AC02-05CH11231 and through BSA under contract No. DE-AC02-98CH10886. Research supported by EU FP7 HiLumi LHC - Grant Agreement 284404. A Proof-of-Principle (PoP) Double Quarter Wave Crab Cavity (DQWCC) was designed and fabricated for the Large Hadron Collider (LHC) luminosity upgrade. A vertical cryogenic test has been done at Brookhaven National Lab (BNL). The cavity achieved 4.5 MV deflecting voltage with a quality factor above 3×10⁹. We report the test results of this design.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPWI060
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design and Prototyping of HL-LHC Double Quarter Wave Crab Cavities for SPS Test

64

S. Verdú-Andrés, S.A. Belomestnykh, I. Ben-Zvi, J. Skaritka, Q. Wu, B. P. Xiao
BNL, Upton, Long Island, New York, USA
L. Alberty, K. Artoos, R. Calaga, O. Capatina, T. Capelli, F. Carra, N. Kuder, R. Leuxe, C. Zanoni
CERN, Geneva, Switzerland
S.A. Belomestnykh, I. Ben-Zvi
Stony Brook University, Stony Brook, USA
Z. Li
SLAC, Menlo Park, California, USA
A. Ratti
LBNL, Berkeley, California, USA

Funding: Work supported by US DOE via US LARP program, through BSA LLC contract No.DE-AC02-98CH10886 and by EU FP7 HiLumi LHC grant No.284404. Used NERSC resources by US DOE contract No.DE-AC02-05CH11231.
The LHC high luminosity project envisages the use of the crabbing technique for increasing and levelling the LHC luminosity. Double-Quarter Wave (DQW) resonators are compact cavities especially designed to meet the technical and performance requirements for LHC beam crabbing. A couple of DQW crab cavities are under preparation and will be tested with beam in the Super Proton Synchrotron (SPS) of CERN by 2017. This paper describes the design and prototyping of DQW crab cavities for the SPS test.

Slides MOBD2 [6.909 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-MOBD2

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWI059

Higher Order Mode Filter Design for Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade

3627

B. P. Xiao, S.A. Belomestnykh, I. Ben-Zvi, J. Skaritka, S. Verdú-Andrés, Q. Wu
BNL, Upton, Long Island, New York, USA
S.A. Belomestnykh, I. Ben-Zvi
Stony Brook University, Stony Brook, USA
G. Burt, B.D.S. Hall
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
G. Burt
Lancaster University, Lancaster, United Kingdom
R. Calaga, O. Capatina
CERN, Geneva, Switzerland
T.J. Jones
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom

Funding: Work partly supported by US LARP, by US DOE under contract No. DE-AC02-05CH11231 and through BSA under contract No. DE-AC02-98CH10886. Research supported by EU FP7 HiLumi LHC - Grant Agreement 284404.
A double quarter wave crab cavity (DQWCC) was designed for the Large Hadron Collider (LHC) luminosity upgrade. A compact Higher Order Mode (HOM) filter with wide stop band at the deflecting mode is developed for this cavity. Multi-physics finite element simulation results are presented. The integration of this design to the cavity cryomodule is described.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPWI059

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPWI060

Cryogenic Test of Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade

3630

B. P. Xiao, S.A. Belomestnykh, I. Ben-Zvi, C. Cullen, L.R. Hammons, C. Marques, J. Skaritka, S. Verdú-Andrés, Q. Wu
BNL, Upton, Long Island, New York, USA
L. Alberty, R. Calaga, O. Capatina
CERN, Geneva, Switzerland
S.A. Belomestnykh, I. Ben-Zvi
Stony Brook University, Stony Brook, USA
Z. Li
SLAC, Menlo Park, California, USA

Funding: Work partly supported by US LARP, by US DOE under contract No. DE-AC02-05CH11231 and through BSA under contract No. DE-AC02-98CH10886. Research supported by EU FP7 HiLumi LHC - Grant Agreement 284404.
A Proof-of-Principle (PoP) Double Quarter Wave Crab Cavity (DQWCC) was designed and fabricated for the Large Hadron Collider (LHC) luminosity upgrade. A vertical cryogenic test has been done at Brookhaven National Lab (BNL). The cavity achieved 4.5 MV deflecting voltage with a quality factor above 3×10⁹. We report the test results of this design.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2015-WEPWI060

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)