Author: Kuriki, M.
Paper Title Page
MOPRO110 Present Status of the Compact ERL at KEK 353
 
  • N. Nakamura, M. Adachi, S. Adachi, M. Akemoto, D.A. Arakawa, S. Asaoka, K. Enami, K. Endo, S. Fukuda, T. Furuya, K. Haga, K. Hara, K. Harada, T. Honda, Y. Honda, H. Honma, T. Honma, K. Hosoyama, K. Hozumi, A. Ishii, E. Kako, Y. Kamiya, H. Katagiri, H. Kawata, Y. Kobayashi, Y. Kojima, Y. Kondou, T. Kume, T. Matsumoto, H. Matsumura, H. Matsushita, S. Michizono, T. Miura, T. Miyajima, H. Miyauchi, S. Nagahashi, H. Nakai, H. Nakajima, K. Nakanishi, K. Nakao, K.N. Nigorikawa, T. Nogami, S. Noguchi, S. Nozawa, T. Obina, T. Ozaki, F. Qiu, H. Sagehashi, H. Sakai, S. Sakanaka, S. Sasaki, K. Satoh, M. Satoh, T. Shidara, M. Shimada, K. Shinoe, T. Shioya, T. Shishido, M. Tadano, T. Tahara, T. Takahashi, R. Takai, H. Takaki, T. Takenaka, O. Tanaka, Y. Tanimoto, M. Tobiyama, K. Tsuchiya, T. Uchiyama, A. Ueda, K. Umemori, K. Watanabe, M. Yamamoto, Y. Yamamoto, Y. Yano, M. Yoshida
    KEK, Ibaraki, Japan
  • E. Cenni
    Sokendai, Ibaraki, Japan
  • R. Hajima, S. Matsuba, R. Nagai, N. Nishimori, M. Sawamura, T. Shizuma
    JAEA, Ibaraki-ken, Japan
  • J.G. Hwang
    KNU, Deagu, Republic of Korea
  • M. Kuriki
    Hiroshima University, Graduate School of Science, Higashi-Hiroshima, Japan
  • Y. Seimiya
    HU/AdSM, Higashi-Hiroshima, Japan
 
  The Compact Energy Recovery Linac (cERL) project is ongoing at KEK in order to demonstrate excellent ERL performance as a future light source. The cERL injector was already constructed with its diagnostic beamline and successfully commissioned from April to June in 2013. In the next step, the cERL recirculation loop with a main superconducting linac and merger and dump sections has been constructed and its commissioning is scheduled to start in December 2013. Significant progress is expected by the IPAC14 conference date. In this presentation, we will describe the present status of the cERL including future developments.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO110  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPRI031 Multi-alkali Photocathode R&D 661
 
  • Y. Seimiya, M. Kuriki, N. Yamamoto
    HU/AdSM, Higashi-Hiroshima, Japan
 
  Multi-alkali photocathode has excellent features: high quantum efficiency, long lifetime, and excitation by visible light, for example green laser. The multi-alkali cathode is considered to be one of the best candidate of the high brightness electron source of the advanced electron accelerator such as ERL and FEL. We study conditions of multi-alkali evaporations, such as thicknesses, substrate temperature, and evaporation rate, and examine the cathode performances, such as quantum efficiency and extractable current density. Antimony (Sb), potassium (K), and cesium (Cs) are used in our evaporation system.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI031  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPRI032 A STUDY ON ROBUSTNESS OF NEA-GAAS PHOTOCATHODE* 664
 
  • K. Uchida, R. Kaku, M. Kuriki, K. Miyoshi, Y. Seimiya, N. Yamamoto
    HU/AdSM, Higashi-Hiroshima, Japan
  • H. Iijima
    Tokyo University of Science, Tokyo, Japan
 
  Electron source is one of the most important component in the advanced linac. There is a strong demand on the high performance cathode, such as small emittance, high brightness, and short pulse generation. NEA-GaAs photo-cathode is a unique technology which is capable for generating highly polarized and extremely low emittance beam. Quantum efficiency (QE) of the cathode is high in near IR region, so it is favor to generate a high current density beam. These advantages are originated to the Negative Electron Affinity (NEA) surface, but it is fragile so the operational lifetime is limited. A study on a robust NEA surface cathode is reported. According to the hetero-junction model, Cs-Te thin film deposited on GaAs forms a robust NEA surface. We performed the Cs-Te evaporation experiment on a clean GaAs cathode and measured QE spectra. We found that some sample showed a high quantum efficiency up to 900nm wavelength which strongly suggested a NEA surface formation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRI032  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPME002 An Optimization of Positron Injector of ILC 1334
 
  • M. Kuriki, Y. Seimiya
    HU/AdSM, Higashi-Hiroshima, Japan
  • S. Kashiwagi
    Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
  • T. Okugi, M. Satoh, J. Urakawa
    KEK, Ibaraki, Japan
 
  Funding: This work is supported by Photon and Quantum Basic Research Coordinated Development Program of MEXT.
ILC (International Linear Collider) is a future project of high energy physics. In the current baseline design, positron generation by gamma rays from undulator radiation is assumed. However, this approach is totally new and it is very difficult to demonstrate the system prior to the construction because it requires more than 100 GeV beam as the driver. A conventional positron generation (e-driven) has been proposed as a technical backup option. In this method, the technology is well established, but the issue is to obtain an enough amount of positron with a manageable energy deposition on target. We present a result of a systematic study of capture efficiency defined by DR (Damping Ring) acceptance where the beam emittance is reduced by radiation damping. We performed a start-to-end simulation of the positron source of ILC and found that an enough amount of the positron per bunch is obtained with a manageable energy deposition on the production target.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPME002  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)