Author: Gallo, A.
Paper Title Page
MOOCA01 High Power Test Results of the SPARC C-Band Accelerating Structures 39
 
  • D. Alesini, M. Bellaveglia, M.E. Biagini, R. Boni, P. Chimenti, R. Clementi, G. Di Pirro, R. D. Di Raddo, M. Ferrario, A. Gallo, V.L. Lollo
    INFN/LNF, Frascati (Roma), Italy
  • M. Brönnimann, R. Kalt, T. Schilcher
    PSI, Villigen PSI, Switzerland
  • L. Ficcadenti
    INFN-Roma, Roma, Italy
  • L. Palumbo
    URLS, Rome, Italy
 
  The energy upgrade of the SPARC photo-injector at LNF-INFN (Italy) from 150 to more than 240 MeV will be done by replacing a low gradient S-Band accelerating structure with two C-band structures. The structures are Traveling Wave (TW) and Constant Impedance (CI), have symmetric axial input couplers and have been optimized to work with a SLED RF input pulse. In the paper we present the results of the low and high power RF tests on the two final fabricated structures that shown the feasibility of the operation at accelerating gradients larger than 35 MV/m.  
slides icon Slides MOOCA01 [6.242 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOOCA01  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPRO078 The SPARC_LAB Thomson Source Commissioning 267
 
  • C. Vaccarezza, D. Alesini, M.P. Anania, M. Bellaveglia, E. Chiadroni, D. Di Giovenale, G. Di Pirro, M. Ferrario, A. Gallo, G. Gatti, R. Pompili, S. Romeo, F. Villa
    INFN/LNF, Frascati (Roma), Italy
  • A. Bacci, C. Curatolo, D.T. Palmer, V. Petrillo, A.R. Rossi, L. Serafini, P. Tomassini
    Istituto Nazionale di Fisica Nucleare, Milano, Italy
  • P. Cardarelli, G. Di Domenico, M. Gambaccini
    INFN-Ferrara, Ferrara, Italy
  • A. Cianchi
    INFN-Roma II, Roma, Italy
  • P. Delogu
    INFN-Pisa, Pisa, Italy
  • F. Filippi, A. Giribono
    INFN-Roma, Roma, Italy
  • B. Golosio, P. Oliva
    INFN-Cagliari, Monserrato (Cagliari), Italy
  • A. Mostacci
    Rome University La Sapienza, Roma, Italy
 
  The SPARC_LAB Thomson source is presently under commissioning at LNF. An electron beam of energy between 30-150 MeV collides head-on with the laser pulse provided by the Ti:Sapphire laser FLAME, characterized in this phase by a length of 6 ps FWHM and by an energy ranging between 1 and 5 J. The key features of this system are the wide range of tunability of the X-rays yield energy, i.e. 20-500 keV, and the availability of a coupled quadrupole and solenoid focusing system, allowing to reach an electron beam size of 10-20 microns at the interaction point. The experimental results obtained in the February 2014 shifts are presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-MOPRO078  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPRI087 A Wideband Slotted Kicker Design for SPS Transverse Intra-bunch Feedback 1772
 
  • J.M. Cesaratto, J.D. Fox, C.H. Rivetta
    SLAC, Menlo Park, California, USA
  • D. Alesini, A. Gallo, M. Zobov
    INFN/LNF, Frascati (Roma), Italy
  • S. De Santis
    LBNL, Berkeley, California, USA
  • W. Höfle
    CERN, Geneva, Switzerland
 
  Funding: Work supported by the U.S. Department of Energy under contract DE-AC02-76SF00515 and the US LHC Accelerator Research Program (LARP) and by the EU FP7 HiLumi LHC - Grant Agreement 284404.
In order for the SPS to meet the beam intensity demands for the HL-LHC upgrade, control and mitigation of transverse beam instabilities caused by electron cloud and TMCI will be essential. For this purpose a wideband intra-bunch feedback method has been proposed, based on a 4 GS/s front end data acquisition and processing, and on a back end frequency response extending to at least 1 GHz. A slotted type kicker, similar to those used for stochastic cooling, as well as an array of stripline kickers have been considered as the terminal elements of the feedback system. A slotted TEM type kicker has been designed fulfilling the bandwidth and kick strength requirements for the SPS application. In this paper we present an updated version of the design and electromagnetic characteristics, leading into the mechanical design and construction of the kicker occurring later this year.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRI087  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEOCA03 DAΦNE Operation with the Upgraded KLOE-2 Detector 1883
 
  • C. Milardi, D. Alesini, M.E. Biagini, M. Boscolo, B. Buonomo, S. Cantarella, A. De Santis, G.O. Delle Monache, G. Di Pirro, A. Drago, L.G. Foggetta, O. Frasciello, A. Gallo, A. Ghigo, F. Guatieri, S. Guiducci, F. Iungo, C. Ligi, G. Mazzitelli, L. Pellegrino, R. Ricci, U. Rotundo, C. Sanelli, G. Sensolini, M. Serio, A. Stecchi, A. Stella, M. Zobov
    INFN/LNF, Frascati (Roma), Italy
  • R. Gargana, A. Michelotti
    Consorzio Laboratorio Nicola Cabibbo, Frascati, Italy
  • D.N. Shatilov
    BINP SB RAS, Novosibirsk, Russia
  • M. Tobiyama
    KEK, Ibaraki, Japan
  • A. Valishev
    Fermilab, Batavia, Illinois, USA
 
  The DAΦNE collider has been successfully commissioned after the experimental detector modification and a major upgrade and consolidation program involving a large part of the accelerator complex. This paper presents the Φ-Factory setup and the achieved performances in terms of beam currents, luminosity, detector background and related aspects.  
slides icon Slides WEOCA03 [2.424 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEOCA03  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPRO115 The Star Project 2238
 
  • A. Bacci, D.T. Palmer, L. Serafini, V. Torri
    Istituto Nazionale di Fisica Nucleare, Milano, Italy
  • R.G. Agostino, G. Borgese, M. Ghedini, F. Martire, C. Pace
    UNICAL, Arcavacata di Rende, Italy
  • D. Alesini, M.P. Anania, M. Bellaveglia, F.G. Bisesto, G. Di Pirro, A. Esposito, M. Ferrario, A. Gallo, G. Gatti, A. Ghigo, B. Spataro, C. Vaccarezza, F. Villa
    INFN/LNF, Frascati (Roma), Italy
  • A. Cianchi
    Università di Roma II Tor Vergata, Roma, Italy
  • G. D'Auria, A. Fabris, M. Marazzi
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • T. Levato
    Czech Republic Academy of Sciences, Institute of Physics, Prague, Czech Republic
  • V. Petrillo
    Universita' degli Studi di Milano, Milano, Italy
  • E. Puppin
    Politecnico/Milano, Milano, Italy
  • P. Tomassini
    Università degli Studi di Milano, Milano, Italy
 
  We present on overview of the STAR project (Southern european Thomson source for Applied Research), in progress at the Univ. of Calabria (Italy) aimed at the construction of an advanced Thomson source of monochromatic tunable, ps-long, polarized X-ray beams, ranging from 20 to 140 keV. The project is pursued in collaboration among: Univ. della Calabria, CNISM, INFN and Sincrotrone Trieste. The X-rays will be devoted to experiments of matter science, cultural heritage, advanced radiological imaging with micro-tomography capabilities. One S-band RF Gun at 100 Hz will produce electron bunches boosted up to 60 MeV by a 3m long S-band TW cavity. A dogleg will bring the beam on a parallel line, shielding the X-ray line from the background radiation due to Linac dark current. The peculiarity of the machine is the ability to produce high quality electron beams, with low emittance and high stability, allowing to reach spot sizes around 15-20 microns, with a pointing jitter of the order of a few microns. The collision laser will be based on a Yb:Yag 100 Hz J-class high quality laser system, synchronized to an external photo-cathode laser and to the RF system to better than 1 ps time jitter.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPRO115  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPRI002 DAΦNE General Consolidation and Upgrade 3760
 
  • C. Milardi, D. Alesini, S. Bini, B. Buonomo, S. Cantarella, A. De Santis, G.O. Delle Monache, G. Di Pirro, A. Drago, L.G. Foggetta, O. Frasciello, A. Gallo, A. Ghigo, F. Iungo, C. Ligi, L. Pellegrino, R. Ricci, U. Rotundo, C. Sanelli, G. Sensolini, A. Stecchi, A. Stella, M. Zobov
    INFN/LNF, Frascati (Roma), Italy
  • R. Gargana, A. Michelotti
    Consorzio Laboratorio Nicola Cabibbo, Frascati, Italy
 
  In the first six months of 2013 the KLOE detector has been upgraded inserting new detector layers in the inner part of the apparatus, around the interaction region. The long shutdown has been used to undertake a general consolidation program aimed at improving the Φ-Factory operation stability and reliability and, in turn, the collider uptime. In this context several systems have been revised and upgraded, new diagnostic elements have been installed, some critical components have been modified and the interaction region mechanical support structure design has been developed to improve its mechanical stability and to deal with the weight added by the new detector layers.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPRI002  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)