IPAC2014 - List of Authors (Choi, B.H.)

Paper	Title	Page
THPME149	Beam Dynamics Issues in the Post Accelerator for the Rare Isotope Ion Beams from ISOL System in RISP	3605
	J.G. Hwang, S.W. Jang, E.-S. Kim Kyungpook National University, Daegu, Republic of Korea B.H. Choi, D. Jeon, H.J. Kim, H.J. Kim, I. Shin IBS, Daejeon, Republic of Korea L. Lee KNU, Deagu, Republic of Korea
	The accelerator for RISP, which is the superconducting technology based heavy ion linear accelerator construction project, is composed mainly of the driver linac for stable ion beam from an ECR ion source and post linac for unstable ion from an ISOL system. The post accelerator can accelerate the unstable ion beams up to 16.5 MeV/u for 132Sn and 16.0 MeV/u for 58Ni, which has the ratio of mass to charge, A/q, of 8.3. The unstable ion beam such as 132Sn from an ISOL system has the large transverse and longitudinal emittances. Hence acceptance and envelope of the post accelerator should optimize for stable operation. The beam was transported by the post-to-driver transport (P2DT) line which consists of a charge stripper, two charge selection sections and a telescope section with the bunching cavities. In this presentation, we will show the criteria for the design of the post accelerator and result of beam tracking simulation from the low energy transport line to the end of post linac. The initial coordinates of the particles were acquired by the tracking simulation from the low energy beam transport (LEBT) line to the medium energy beam transport (MEBT) line.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME149
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Dynamics Issues in the Post Accelerator for the Rare Isotope Ion Beams from ISOL System in RISP

3605

J.G. Hwang, S.W. Jang, E.-S. Kim
Kyungpook National University, Daegu, Republic of Korea
B.H. Choi, D. Jeon, H.J. Kim, H.J. Kim, I. Shin
IBS, Daejeon, Republic of Korea
L. Lee
KNU, Deagu, Republic of Korea

The accelerator for RISP, which is the superconducting technology based heavy ion linear accelerator construction project, is composed mainly of the driver linac for stable ion beam from an ECR ion source and post linac for unstable ion from an ISOL system. The post accelerator can accelerate the unstable ion beams up to 16.5 MeV/u for 132Sn and 16.0 MeV/u for 58Ni, which has the ratio of mass to charge, A/q, of 8.3. The unstable ion beam such as 132Sn from an ISOL system has the large transverse and longitudinal emittances. Hence acceptance and envelope of the post accelerator should optimize for stable operation. The beam was transported by the post-to-driver transport (P2DT) line which consists of a charge stripper, two charge selection sections and a telescope section with the bunching cavities. In this presentation, we will show the criteria for the design of the post accelerator and result of beam tracking simulation from the low energy transport line to the end of post linac. The initial coordinates of the particles were acquired by the tracking simulation from the low energy beam transport (LEBT) line to the medium energy beam transport (MEBT) line.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-THPME149

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)