Author: Butkowski, L.     [Butkowski, Ł.]
Paper Title Page
TUPRI107 Compact MTCA.4 Based Laser Synchronization 1823
 
  • M. Felber, Ł. Butkowski, H.T. Duhme, M. Fenner, C. Gerth, U. Mavrič, P. Peier, H. Schlarb, B. Steffen
    DESY, Hamburg, Germany
  • T. Kozak, P. Prędki, K.P. Przygoda
    TUL-DMCS, Łódź, Poland
 
  In this paper we present a compact and efficient approach for laser synchronization based on MTCA.4 platform. Laser pulses are converted to the RF signals using a photo-diode detector. The RF section performs filtering, amplification and down-conversion of a narrowband, CW signal. The resulting IF signal is sampled by a high resolution digitizer on the AMC (Advanced Mezzanine Card) side and transported via point-to-point links to an adjacent AMC board. The processing electronics on this board drives a digital-to-analog converter on the rear-side. The analog signal is then filtered and amplified by a high voltage power amplifier which drives the piezo stretcher in the laser. Some preliminary results of laser to RF locking with such a scheme are presented.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-TUPRI107  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPME065 European XFEL RF Gun Commissioning and LLRF Linac Installation 2427
 
  • J. Branlard, G. Ayvazyan, V. Ayvazyan, Ł. Butkowski, M.K. Grecki, M. Hoffmann, F. Ludwig, U. Mavrič, S. Pfeiffer, H. Schlarb, Ch. Schmidt, H.C. Weddig, B.Y. Yang
    DESY, Hamburg, Germany
  • S. Bou Habib, K. Czuba, M. Grzegrzółka, E. Janas, J. Piekarski, I. Rutkowski, R. Rybaniec, D. Sikora, L.Z. Zembala, M. Żukociński
    Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland
  • W. Cichalewski, D.R. Makowski, A. Mielczarek, P. Perek, A. Piotrowski, T. Pożniak
    TUL-DMCS, Łódź, Poland
  • S. Korolczuk, I.M. Kudla, J. Szewiński
    NCBJ, Świerk/Otwock, Poland
  • K. Oliwa, W. Wierba
    IFJ-PAN, Kraków, Poland
 
  The European x-ray free electron laser (XFEL) is based on a 17.5 GeV super conducting pulsed linac and is scheduled to deliver its first beam in 2016. The first component of its accelerator chain, the RF gun, was installed in fall of 2013 and its commissioning is underway. This contribution gives an update on the low level radio frequency (LLRF) system development and installation for the XFEL. In particular, the installation, performance and conditioning results of the RF gun are presented. The subsequent steps toward LLRF components mass-production, testing and installation for the XFEL linac are also explained.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPME065  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPME066 High Speed Digitial LLRF Feedbacks for Normal Conducting Cavity Operation 2430
 
  • M. Hoffmann, Ł. Butkowski, H. Schlarb, Ch. Schmidt
    DESY, Hamburg, Germany
  • W. Köhler
    DESY Zeuthen, Zeuthen, Germany
  • A. Piotrowski
    TUL-DMCS, Łódź, Poland
  • I. Rutkowski, R. Rybaniec
    Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland
 
  In the first half of the year 2014, the MTCA.4 based LLRF control system will be installed at several facilities (FLASH RF Gun, REGAE, PITZ, FLUTE/KIT). First tests during the last year show promising results in optimizing the system for high speed digital llrf feedbacks (reducing system latency, increase internal controller processing speed). In this contribution we will present further improvements in latency and performance optimization of the system, results and gained experience from the commisioning of the system at the metioned facilities.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPME066  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPME067 Performance of the MTCA.4 Based LLRF System at FLASH 2433
 
  • Ch. Schmidt, V. Ayvazyan, J. Branlard, Ł. Butkowski, M.K. Grecki, M. Hoffmann, F. Ludwig, U. Mavrič, K.P. Przygoda, H. Schlarb, H.C. Weddig, B.Y. Yang
    DESY, Hamburg, Germany
  • W. Cichalewski, D.R. Makowski, A. Piotrowski
    TUL-DMCS, Łódź, Poland
  • K. Czuba, I. Rutkowski, D. Sikora, M. Żukociński
    Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland
  • I.M. Kudla
    NCBJ, Świerk/Otwock, Poland
  • K. Oliwa, W. Wierba
    IFJ-PAN, Kraków, Poland
 
  The Free Electron Laser in Hamburg (FLASH) is the first linac which is equipped with a MTCA.4 based low level RF control system. Precise regulation of RF fields is essential for stable and and reproducible photon generation. Flash benefits from the performance increase using the new developments like, accurate and precise field detection devices. Further enourmous increase of processing capabilities allow for more sophisticated controller applications which better the overall performance of the regulation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPME067  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPME075 Real-time Estimation of Superconducting Cavities Parameters 2456
 
  • R. Rybaniec
    Warsaw University of Technology, Institute of Electronic Systems, Warsaw, Poland
  • V. Ayvazyan, J. Branlard, Ł. Butkowski, S. Pfeiffer, H. Schlarb, Ch. Schmidt
    DESY, Hamburg, Germany
  • W. Cichalewski, K.P. Przygoda
    TUL-DMCS, Łódź, Poland
 
  Performance of accelerators based on the superconductive cavities including FLASH and XFEL facilities at DESY is affected by cavity parameters variation over time. High gradient electromagnetic field inside cavities causes detuning due to the Lorentz force. In addition the quality factor of cavities can change during the RF field pulse. Currently used method for estimation of those parameters is based on the post-processing of the data recorded during operation of the RF. External servers calculate cavity parameters using cavity equation, forward power and probe signals collected during previous pulse. A novel approach* based on the component implemented in FPGA is presented. In the new method loaded quality factor and detuning are estimated in real-time during the RF pulse for increased reliability and better exception handling. Modified firmware of the LLRF control system based on the Micro Telecommunications Computing Architecture (MTCA) platform has been used for the method verification.
*”Development of Control System for Fast Frequency Tuners of Superconducting Resonant Cavities for FLASH and XFEL Experiments”, K. Przygoda, PhD thesis, Technical University of Łódź, Poland, 2010.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2014-WEPME075  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)