IPAC2013 - List of Authors (Watanabe, M.)

Paper	Title	Page
MOPWA007	Operating Experience of Kicker Magnet System in the J-PARC 3GeV RCS	678
	K. Suganuma, M. Kinsho, T. Togashi, M. Watanabe JAEA/J-PARC, Tokai-mura, Japan
	The J-PARC 3-GeV rapid cycling synchrotron (RCS) has been provided proton beam to the Material and Life Science Facility (MLF)as well as to the 50 GeV Main Ring (MR). Proton beam is accelerated from 181 MeV to 3GeV in the RCS and immediately extracted it to the beam transport line to the MLF and the MR. Extraction kicker system is used for this fast extraction. The RCS has been operated for the neutron and MLF users program from December 23rd, 2008. At the beginning of user operation there were many troubles for the extraction kicker system, especially, thyratron which are used for switch of power supply often caused failure. The beam stop rate due to RCS extraction kicker system was more than 13% in the total beam stop of the J-PARC, establishment and operation experience of the tuning for power supply of the extraction kicker make the beam stop rate less than 0.5% in November 2012. In this paper, we are going to report about daily operation whose main is about operation of thyratron and the maintenance held in summer 2012. And　 We also going to report about the aptitude test of thyratron as a plan of the future.

THPWO032	Progress of Injection Energy Upgrade Project for J-PARC RCS	3833
	N. Hayashi, H. Harada, K. Horino, H. Hotchi, J. Kamiya, M. Kinsho, P.K. Saha, Y. Shobuda, T. Takayanagi, N. Tani, T. Togashi, T. Ueno, M. Watanabe, Y. Watanabe, K. Yamamoto, M. Yamamoto, Y. Yamazaki, M. Yoshimoto JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan Y. Irie KEK, Ibaraki, Japan T. Toyama J-PARC, KEK & JAEA, Ibaraki-ken, Japan
	The injection energy of the J-PARC RCS will be upgraded in 2013. New power supplies for the shift bump magnet system will be installed. Some of other systems, upgrade of the painting bump power supplies and pulse steering systems, are already installed and tested or used for the nominal operation. The paper reports the progress of injection energy upgrade project.

Paper

Title

Page

Operating Experience of Kicker Magnet System in the J-PARC 3GeV RCS

678

K. Suganuma, M. Kinsho, T. Togashi, M. Watanabe
JAEA/J-PARC, Tokai-mura, Japan

The J-PARC 3-GeV rapid cycling synchrotron (RCS) has been provided proton beam to the Material and Life Science Facility (MLF)as well as to the 50 GeV Main Ring (MR). Proton beam is accelerated from 181 MeV to 3GeV in the RCS and immediately extracted it to the beam transport line to the MLF and the MR. Extraction kicker system is used for this fast extraction. The RCS has been operated for the neutron and MLF users program from December 23rd, 2008. At the beginning of user operation there were many troubles for the extraction kicker system, especially, thyratron which are used for switch of power supply often caused failure. The beam stop rate due to RCS extraction kicker system was more than 13% in the total beam stop of the J-PARC, establishment and operation experience of the tuning for power supply of the extraction kicker make the beam stop rate less than 0.5% in November 2012. In this paper, we are going to report about daily operation whose main is about operation of thyratron and the maintenance held in summer 2012. And　 We also going to report about the aptitude test of thyratron as a plan of the future.

THPWO032

Progress of Injection Energy Upgrade Project for J-PARC RCS

3833

N. Hayashi, H. Harada, K. Horino, H. Hotchi, J. Kamiya, M. Kinsho, P.K. Saha, Y. Shobuda, T. Takayanagi, N. Tani, T. Togashi, T. Ueno, M. Watanabe, Y. Watanabe, K. Yamamoto, M. Yamamoto, Y. Yamazaki, M. Yoshimoto
JAEA/J-PARC, Tokai-Mura, Naka-Gun, Ibaraki-Ken, Japan
Y. Irie
KEK, Ibaraki, Japan
T. Toyama
J-PARC, KEK & JAEA, Ibaraki-ken, Japan

The injection energy of the J-PARC RCS will be upgraded in 2013. New power supplies for the shift bump magnet system will be installed. Some of other systems, upgrade of the painting bump power supplies and pulse steering systems, are already installed and tested or used for the nominal operation. The paper reports the progress of injection energy upgrade project.