IPAC2013 - List of Authors (Tavian, L.J.)

Paper	Title	Page
TUPFI002	Electron Cloud and Scrubbing Studies for the LHC	1331
	G. Iadarola Naples University Federico II, Science and Technology Pole, Napoli, Italy G. Arduini, V. Baglin, H. Bartosik, C.O. Domínguez, J.F. Esteban Müller, G. Iadarola, G. Rumolo, E.N. Shaposhnikova, L.J. Tavian, F. Zimmermann CERN, Geneva, Switzerland C.O. Domínguez EPFL, Lausanne, Switzerland G.H.I. Maury Cuna CINVESTAV, Mexico City, Mexico
	Electron cloud build-up resulting from beam-induced multipacting is one of the major limitations for the operation of the LHC with beams with close bunch spacing. Electron clouds induce unwanted pressure rise, heat loads on the beam screens of the superconducting magnets and beam instabilities. Operation with bunch spacing of 50 ns in 2011 and 2012 has required decreasing the Secondary Electron Yield of the beam screens below the multipacting threshold for beams with this bunch spacing. This was achieved by continuous electron bombardment induced by operating the machine with high intensity beams with 50 and 25 ns spacing during dedicated periods at injection energy (450 GeV) and at top energy (3.5 and 4 TeV). The evolution of the Secondary Electron Yield during these periods, at different sections of the machine, can be estimated by pressure, heat load and by bunch-by-bunch RF stable phase measurements. The experimental information on the scrubbing process will be discussed and a possible “scrubbing strategy” to allow the operation with 50ns and 25ns beams after the Long Shutdown in 2013-2014 will be presented.

TUPME032	Update on Beam Induced RF Heating in the LHC	1646
	B. Salvant, O. Aberle, G. Arduini, R.W. Aßmann, V. Baglin, M.J. Barnes, W. Bartmann, P. Baudrenghien, O.E. Berrig, A. Bertarelli, C. Bracco, E. Bravin, G. Bregliozzi, R. Bruce, F. Carra, F. Caspers, G. Cattenoz, S.D. Claudet, H.A. Day, M. Deile, J.F. Esteban Müller, P. Fassnacht, M. Garlaschè, L. Gentini, B. Goddard, A. Grudiev, B. Henrist, S. Jakobsen, O.R. Jones, O. Kononenko, G. Lanza, L. Lari, T. Mastoridis, V. Mertens, N. Mounet, E. Métral, A.A. Nosych, J.L. Nougaret, S. Persichelli, A.M. Piguiet, S. Redaelli, F. Roncarolo, G. Rumolo, B. Salvachua, M. Sapinski, R. Schmidt, E.N. Shaposhnikova, L.J. Tavian, M.A. Timmins, J.A. Uythoven, A. Vidal, J. Wenninger, D. Wollmann, M. Zerlauth CERN, Geneva, Switzerland H.A. Day UMAN, Manchester, United Kingdom L. Lari IFIC, Valencia, Spain
	Since June 2011, the rapid increase of the luminosity performance of the LHC has come at the expense of increased temperature and pressure readings on specific near-beam LHC equipment. In some cases, this beam induced heating has caused delays whilie equipment cools down, beam dumps and even degradation of these devices. This contribution gathers the observations of beam induced heating attributable to beam coupling impedance, their current level of understanding and possible actions that are planned to be implemented during the long shutdown in 2013-2014.

THPME034	The LHC Cryogenic Operation Availability Results from the First Physics Run of Three Years	3585
	D. Delikaris, K. Brodzinski, S.D. Claudet, G. Ferlin, L.J. Tavian, U. Wagner CERN, Geneva, Switzerland
	The LHC (Large Hadron Collider) accelerator consists in eight cryogenically independent sectors, each 3.3 km long with a cold mass of 4500 ton cooled at 1.9 K. Each helium cryogenic plant combines an 18 kW at 4.5 K refrigerator and a 2.4 kW at 1.8 K refrigeration unit. Since early operation for physics in November 2009, the availability has been above 90% for more than 260 days per year, ending at 94.8% in 2012 and corresponding to an equivalent availability of more than 99% per independent sector. The operation and support methodology as well as the achieved performance results are presented. Emphasis is given on implementing operational return for short, medium and long term consolidations. Perspective for restart after the first long shutdown of the LHC works will be described.

Paper

Title

Page

Electron Cloud and Scrubbing Studies for the LHC

1331

G. Iadarola
Naples University Federico II, Science and Technology Pole, Napoli, Italy
G. Arduini, V. Baglin, H. Bartosik, C.O. Domínguez, J.F. Esteban Müller, G. Iadarola, G. Rumolo, E.N. Shaposhnikova, L.J. Tavian, F. Zimmermann
CERN, Geneva, Switzerland
C.O. Domínguez
EPFL, Lausanne, Switzerland
G.H.I. Maury Cuna
CINVESTAV, Mexico City, Mexico

Electron cloud build-up resulting from beam-induced multipacting is one of the major limitations for the operation of the LHC with beams with close bunch spacing. Electron clouds induce unwanted pressure rise, heat loads on the beam screens of the superconducting magnets and beam instabilities. Operation with bunch spacing of 50 ns in 2011 and 2012 has required decreasing the Secondary Electron Yield of the beam screens below the multipacting threshold for beams with this bunch spacing. This was achieved by continuous electron bombardment induced by operating the machine with high intensity beams with 50 and 25 ns spacing during dedicated periods at injection energy (450 GeV) and at top energy (3.5 and 4 TeV). The evolution of the Secondary Electron Yield during these periods, at different sections of the machine, can be estimated by pressure, heat load and by bunch-by-bunch RF stable phase measurements. The experimental information on the scrubbing process will be discussed and a possible “scrubbing strategy” to allow the operation with 50ns and 25ns beams after the Long Shutdown in 2013-2014 will be presented.

TUPME032

Update on Beam Induced RF Heating in the LHC

1646

B. Salvant, O. Aberle, G. Arduini, R.W. Aßmann, V. Baglin, M.J. Barnes, W. Bartmann, P. Baudrenghien, O.E. Berrig, A. Bertarelli, C. Bracco, E. Bravin, G. Bregliozzi, R. Bruce, F. Carra, F. Caspers, G. Cattenoz, S.D. Claudet, H.A. Day, M. Deile, J.F. Esteban Müller, P. Fassnacht, M. Garlaschè, L. Gentini, B. Goddard, A. Grudiev, B. Henrist, S. Jakobsen, O.R. Jones, O. Kononenko, G. Lanza, L. Lari, T. Mastoridis, V. Mertens, N. Mounet, E. Métral, A.A. Nosych, J.L. Nougaret, S. Persichelli, A.M. Piguiet, S. Redaelli, F. Roncarolo, G. Rumolo, B. Salvachua, M. Sapinski, R. Schmidt, E.N. Shaposhnikova, L.J. Tavian, M.A. Timmins, J.A. Uythoven, A. Vidal, J. Wenninger, D. Wollmann, M. Zerlauth
CERN, Geneva, Switzerland
H.A. Day
UMAN, Manchester, United Kingdom
L. Lari
IFIC, Valencia, Spain

Since June 2011, the rapid increase of the luminosity performance of the LHC has come at the expense of increased temperature and pressure readings on specific near-beam LHC equipment. In some cases, this beam induced heating has caused delays whilie equipment cools down, beam dumps and even degradation of these devices. This contribution gathers the observations of beam induced heating attributable to beam coupling impedance, their current level of understanding and possible actions that are planned to be implemented during the long shutdown in 2013-2014.

THPME034

The LHC Cryogenic Operation Availability Results from the First Physics Run of Three Years

3585

D. Delikaris, K. Brodzinski, S.D. Claudet, G. Ferlin, L.J. Tavian, U. Wagner
CERN, Geneva, Switzerland

The LHC (Large Hadron Collider) accelerator consists in eight cryogenically independent sectors, each 3.3 km long with a cold mass of 4500 ton cooled at 1.9 K. Each helium cryogenic plant combines an 18 kW at 4.5 K refrigerator and a 2.4 kW at 1.8 K refrigeration unit. Since early operation for physics in November 2009, the availability has been above 90% for more than 260 days per year, ending at 94.8% in 2012 and corresponding to an equivalent availability of more than 99% per independent sector. The operation and support methodology as well as the achieved performance results are presented. Emphasis is given on implementing operational return for short, medium and long term consolidations. Perspective for restart after the first long shutdown of the LHC works will be described.