IPAC2013 - List of Authors (Roncolato, C.)

Paper	Title	Page
WEPFI014	Present Status and Progresses of RFQ of IFMIF/EVEDA	2729
	R. Dima, A. Pepato, F. Scantamburlo, E. Udup INFN- Sez. di Padova, Padova, Italy F. Grespan, A. Palmieri, C. Roncolato INFN/LNL, Legnaro (PD), Italy
	The RFQ of IFMIF/EVEDA is designed to accelerate a 125 mA D⁺ beam from 0.1 MeV to 5 MeV at a frequency of 175 MHz. The production of the modules 16, 17 and 18 necessary has been completed. In this paper the progress and improvements on the production of the modules, as well the development of the brazing procedure design will be described.

THPWO023	The New RFQ as RIB Injector of the ALPI Linac	3812
	M. Comunian, A. Palmieri, A. Pisent, C. Roncolato INFN/LNL, Legnaro (PD), Italy
	At the Legnaro National Laboratories it is operating a Super Conducting linac for nuclear studies named ALPI. A new project SPES is under study to provide neutron-rich rare nuclear beams (RIB) of final energies in the order of 10 MeV/A for nuclei in the A= 9-160 mass region. The radioactive ions will be produced with the ISOL technique using the proton induced fission on a Direct Target of UCx and subsequently reaccelerated using a new injector for the ALPI accelerator complex. In this paper the new RFQ injector and the transport line to ALPI will be describe.

THPWO024	PROGRESS ON DTL DESIGN FOR ESS	3815
	M. Comunian, F. Grespan, A. Pisent, C. Roncolato INFN/LNL, Legnaro (PD), Italy R. De Prisco ESS, Lund, Sweden P. Mereu INFN-Torino, Torino, Italy
	In the European Spallation Source (ESS) accelerator, the Drift Tube Linac (DTL) will accelerate a proton beam of 50 mA pulse peak current from 3 to ~80 MeV. In this paper the engineering design of DTL tanks with the beam dynamics errors studies and the RF design are shown.

Paper

Title

Page

Present Status and Progresses of RFQ of IFMIF/EVEDA

2729

R. Dima, A. Pepato, F. Scantamburlo, E. Udup
INFN- Sez. di Padova, Padova, Italy
F. Grespan, A. Palmieri, C. Roncolato
INFN/LNL, Legnaro (PD), Italy

The RFQ of IFMIF/EVEDA is designed to accelerate a 125 mA D⁺ beam from 0.1 MeV to 5 MeV at a frequency of 175 MHz. The production of the modules 16, 17 and 18 necessary has been completed. In this paper the progress and improvements on the production of the modules, as well the development of the brazing procedure design will be described.

THPWO023

The New RFQ as RIB Injector of the ALPI Linac

3812

M. Comunian, A. Palmieri, A. Pisent, C. Roncolato
INFN/LNL, Legnaro (PD), Italy

At the Legnaro National Laboratories it is operating a Super Conducting linac for nuclear studies named ALPI. A new project SPES is under study to provide neutron-rich rare nuclear beams (RIB) of final energies in the order of 10 MeV/A for nuclei in the A= 9-160 mass region. The radioactive ions will be produced with the ISOL technique using the proton induced fission on a Direct Target of UCx and subsequently reaccelerated using a new injector for the ALPI accelerator complex. In this paper the new RFQ injector and the transport line to ALPI will be describe.

THPWO024

PROGRESS ON DTL DESIGN FOR ESS

3815

M. Comunian, F. Grespan, A. Pisent, C. Roncolato
INFN/LNL, Legnaro (PD), Italy
R. De Prisco
ESS, Lund, Sweden
P. Mereu
INFN-Torino, Torino, Italy

In the European Spallation Source (ESS) accelerator, the Drift Tube Linac (DTL) will accelerate a proton beam of 50 mA pulse peak current from 3 to ~80 MeV. In this paper the engineering design of DTL tanks with the beam dynamics errors studies and the RF design are shown.