IPAC2013 - List of Authors (Pasquinelli, R.J.)

Paper	Title	Page
WEPFI066	The RF System for the MICE Experiment	2848
	K. Ronald, A.J. Dick, C.G. Whyte USTRAT/SUPA, Glasgow, United Kingdom P.A. Corlett STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom A.J. DeMello, D. Li, S.P. Virostek LBNL, Berkeley, California, USA A.F. Grant, A.J. Moss, C.J. White STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom P.M. Hanlet IIT, Chicago, Illinois, USA C. Hunt, K.R. Long, J. Pasternak Imperial College of Science and Technology, Department of Physics, London, United Kingdom T.H. Luo, D.J. Summers UMiss, University, Mississippi, USA A. Moretti, R.J. Pasquinelli, D.W. Peterson, R.P. Schultz, J.T. Volk Fermilab, Batavia, USA P.J. Smith Sheffield University, Sheffield, United Kingdom T. Stanley STFC/RAL, Chilton, Didcot, Oxon, United Kingdom Y. Torun Illinois Institute of Technology, Chicago, IL, USA
	The International Muon Ionisation Cooling Experiment (MICE) is designed to demonstrate the effectiveness of ionisation cooling to reduce the phase space footprint of a muon beam, principally to allow the subsequent acceleration of muons for next generation colliders and/or neutrino factories. The experiment (and indeed any subsequent accelerator cooling channel based on the same principles) poses certain unusual requirements on its RF system, whilst the precision measurement of the ionisation cooling process demands special diagnostics. This paper shall outline the key features of the RF system, including the LLRF control, the power amplifier chain, distribution network, cavities, tuners and couplers, all of which must operate in a high magnetic field environment. The RF diagnostics which, in conjunction with the other MICE diagnostics, shall allow detailed knowledge of the amplitude and phase of the acceleration field during the transit of each individual Muon shall also be outlined.

WEPFI073	A Modular Cavity for Muon Ionization Cooling R&D	2860
	D.L. Bowring, A.J. DeMello, A.R. Lambert, D. Li, S.P. Virostek, M.S. Zisman LBNL, Berkeley, California, USA C. Adolphsen, L. Ge, A.A. Haase, K.H. Lee, Z. Li, D.W. Martin SLAC, Menlo Park, California, USA D.M. Kaplan Illinois Institute of Technology, Chicago, Illinois, USA T.H. Luo, D.J. Summers UMiss, University, Mississippi, USA A. Moretti, M.A. Palmer, R.J. Pasquinelli, Y. Torun Fermilab, Batavia, USA R.B. Palmer BNL, Upton, Long Island, New York, USA
	The Muon Accelerator Program (MAP) collaboration is developing an ionization cooling channel for muon beams. Ionization cooling channel designs call for the operation of high-gradient, normal-conducting RF cavities in multi-Tesla solenoidal magnetic fields. However, strong magnetic fields have been shown to limit the maximum achievable gradient in RF cavities. This gradient limit is characterized by RF breakdown and damage to the cavity surface. To study this issue, we have developed an experimental program based on a modular pillbox cavity operating at 805 MHz. The modular cavity design allows for the evaluation of different cavity materials - such as beryllium - which may ameliorate or circumvent RF breakdown triggers. Modular cavity components may furthermore be prepared with different surface treatments, such as high-temperature baking or chemical polishing. This poster presents the design and experimental status of the modular cavity, as well as future plans for the experimental program.

Paper

Title

Page

The RF System for the MICE Experiment

2848

K. Ronald, A.J. Dick, C.G. Whyte
USTRAT/SUPA, Glasgow, United Kingdom
P.A. Corlett
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
A.J. DeMello, D. Li, S.P. Virostek
LBNL, Berkeley, California, USA
A.F. Grant, A.J. Moss, C.J. White
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
P.M. Hanlet
IIT, Chicago, Illinois, USA
C. Hunt, K.R. Long, J. Pasternak
Imperial College of Science and Technology, Department of Physics, London, United Kingdom
T.H. Luo, D.J. Summers
UMiss, University, Mississippi, USA
A. Moretti, R.J. Pasquinelli, D.W. Peterson, R.P. Schultz, J.T. Volk
Fermilab, Batavia, USA
P.J. Smith
Sheffield University, Sheffield, United Kingdom
T. Stanley
STFC/RAL, Chilton, Didcot, Oxon, United Kingdom
Y. Torun
Illinois Institute of Technology, Chicago, IL, USA

The International Muon Ionisation Cooling Experiment (MICE) is designed to demonstrate the effectiveness of ionisation cooling to reduce the phase space footprint of a muon beam, principally to allow the subsequent acceleration of muons for next generation colliders and/or neutrino factories. The experiment (and indeed any subsequent accelerator cooling channel based on the same principles) poses certain unusual requirements on its RF system, whilst the precision measurement of the ionisation cooling process demands special diagnostics. This paper shall outline the key features of the RF system, including the LLRF control, the power amplifier chain, distribution network, cavities, tuners and couplers, all of which must operate in a high magnetic field environment. The RF diagnostics which, in conjunction with the other MICE diagnostics, shall allow detailed knowledge of the amplitude and phase of the acceleration field during the transit of each individual Muon shall also be outlined.

WEPFI073

A Modular Cavity for Muon Ionization Cooling R&D

2860

D.L. Bowring, A.J. DeMello, A.R. Lambert, D. Li, S.P. Virostek, M.S. Zisman
LBNL, Berkeley, California, USA
C. Adolphsen, L. Ge, A.A. Haase, K.H. Lee, Z. Li, D.W. Martin
SLAC, Menlo Park, California, USA
D.M. Kaplan
Illinois Institute of Technology, Chicago, Illinois, USA
T.H. Luo, D.J. Summers
UMiss, University, Mississippi, USA
A. Moretti, M.A. Palmer, R.J. Pasquinelli, Y. Torun
Fermilab, Batavia, USA
R.B. Palmer
BNL, Upton, Long Island, New York, USA

The Muon Accelerator Program (MAP) collaboration is developing an ionization cooling channel for muon beams. Ionization cooling channel designs call for the operation of high-gradient, normal-conducting RF cavities in multi-Tesla solenoidal magnetic fields. However, strong magnetic fields have been shown to limit the maximum achievable gradient in RF cavities. This gradient limit is characterized by RF breakdown and damage to the cavity surface. To study this issue, we have developed an experimental program based on a modular pillbox cavity operating at 805 MHz. The modular cavity design allows for the evaluation of different cavity materials - such as beryllium - which may ameliorate or circumvent RF breakdown triggers. Modular cavity components may furthermore be prepared with different surface treatments, such as high-temperature baking or chemical polishing. This poster presents the design and experimental status of the modular cavity, as well as future plans for the experimental program.