IPAC2013 - List of Authors (Neil, G.)

Paper	Title	Page
WEPWA068	Design Concepts for the NGLS Linac	2271
	A. Ratti, J.M. Byrd, J.N. Corlett, L.R. Doolittle, P. Emma, J. Qiang, M. Venturini, R.P. Wells LBNL, Berkeley, California, USA C. Adolphsen, C.D. Nantista SLAC, Menlo Park, California, USA D. Arenius, S.V. Benson, D. Douglas, A. Hutton, G. Neil, W. Oren, G.P. Williams JLAB, Newport News, Virginia, USA C.M. Ginsburg, R.D. Kephart, T.J. Peterson, A.I. Sukhanov Fermilab, Batavia, USA
	The Next Generation Light Source (NGLS) is a design concept for a multibeamline soft x-ray FEL array powered by a ~2.4 GeV CW superconducting linear accelerator, operating with a 1 MHz bunch repetition rate. This paper describes the concepts under development for a linac operating at 1.3 GHZ and based on minimal modifications to the design of ILC cryomodules in order to leverage the extensive R&D that resulted in the ILC design. Due to the different nature of the two applications, particular attention is given here to high loaded Q operation andμphonics control, as well as high reliability and expected up time.

WEPWA077	Aperture Test for Internal Target Operation in the JLAB High-current ERL	2289
	S. Zhang, S.V. Benson, G.H. Biallas, K. Blackburn, J.R. Boyce, D.B. Bullard, J.L. Coleman, J. Delk, D. Douglas, P. Evtushenko, C.W. Gould, J.G. Gubeli, F.E. Hannon, D. Hardy, C. Hernandez-Garcia, K. Jordan, J.M. Klopf, R.A. Legg, M. Marchlik, W. Moore, G. Neil, J. Powers, T. Powers, D.W. Sexton, M.D. Shinn, C. Tennant, R.L. Walker, G.P. Williams, F.G. Wilson JLAB, Newport News, Virginia, USA J. Balewski, J. Bernauer, W. Bertozzi, R.F. Cowan, P.F. Fisher, E. Ihloff, A. Kelleher, R. Milner, L. Ou, B.A. Schmookler, C. Tschalär MIT, Middleton, Massachusetts, USA N. Kalantarians Hampton University, Hampton, Virginia, USA
	Funding: Supported by the Commonwealth of Virginia, U.S. DOE Nuclear and High Energy Physics, and by the U.S. DOE Basic Energy Sciences under contract No. DE-AC05-060R23177. A high current beam transmission test has been successfully completed at the JLAB FEL Facility, culminating in very low-loss transmission of a high current CW beam through a small aperture. The purpose of this test was to determine if an ERL is capable of meeting the stringent requirements imposed by the use of a 10¹⁸/cm³ internal gas target proposed for the DarkLight experiment. Minimal beamline modifications were made to create a machine configuration that is substantially different from those used in routine UV or IR FEL operation. A sustained (8 hour) high power beam run was performed, with clean transmission through a 2 mm transverse aperture of 127 mm length simulating the target configuration. A beam size of 50 um (rms) was measured near the center of the aperture. Experimental data from a week-long test run consistently exhibited beam loss of only a few ppm on the aperture while running 4.5 mA current at 100 MeV – or nearly 0.5 MW beam power. This surpassed the users’ expectation and demonstrated a unique capability of an ERL for this type of experiments. This report presents a summary of the experiment, a brief overview of our activities, and outlines future plans. References: P. Fisher, et al.,“Jlab PR-11-008: A Proposal for the DarkLight Experiment at the Jefferson Laboratory Free Electron Laser.” http://www.jlab.org/exp_prog/proposals/11prop.html

Paper

Title

Page

Design Concepts for the NGLS Linac

2271

A. Ratti, J.M. Byrd, J.N. Corlett, L.R. Doolittle, P. Emma, J. Qiang, M. Venturini, R.P. Wells
LBNL, Berkeley, California, USA
C. Adolphsen, C.D. Nantista
SLAC, Menlo Park, California, USA
D. Arenius, S.V. Benson, D. Douglas, A. Hutton, G. Neil, W. Oren, G.P. Williams
JLAB, Newport News, Virginia, USA
C.M. Ginsburg, R.D. Kephart, T.J. Peterson, A.I. Sukhanov
Fermilab, Batavia, USA

The Next Generation Light Source (NGLS) is a design concept for a multibeamline soft x-ray FEL array powered by a ~2.4 GeV CW superconducting linear accelerator, operating with a 1 MHz bunch repetition rate. This paper describes the concepts under development for a linac operating at 1.3 GHZ and based on minimal modifications to the design of ILC cryomodules in order to leverage the extensive R&D that resulted in the ILC design. Due to the different nature of the two applications, particular attention is given here to high loaded Q operation andμphonics control, as well as high reliability and expected up time.

WEPWA077

Aperture Test for Internal Target Operation in the JLAB High-current ERL

2289

S. Zhang, S.V. Benson, G.H. Biallas, K. Blackburn, J.R. Boyce, D.B. Bullard, J.L. Coleman, J. Delk, D. Douglas, P. Evtushenko, C.W. Gould, J.G. Gubeli, F.E. Hannon, D. Hardy, C. Hernandez-Garcia, K. Jordan, J.M. Klopf, R.A. Legg, M. Marchlik, W. Moore, G. Neil, J. Powers, T. Powers, D.W. Sexton, M.D. Shinn, C. Tennant, R.L. Walker, G.P. Williams, F.G. Wilson
JLAB, Newport News, Virginia, USA
J. Balewski, J. Bernauer, W. Bertozzi, R.F. Cowan, P.F. Fisher, E. Ihloff, A. Kelleher, R. Milner, L. Ou, B.A. Schmookler, C. Tschalär
MIT, Middleton, Massachusetts, USA
N. Kalantarians
Hampton University, Hampton, Virginia, USA

Funding: Supported by the Commonwealth of Virginia, U.S. DOE Nuclear and High Energy Physics, and by the U.S. DOE Basic Energy Sciences under contract No. DE-AC05-060R23177.
A high current beam transmission test has been successfully completed at the JLAB FEL Facility, culminating in very low-loss transmission of a high current CW beam through a small aperture. The purpose of this test was to determine if an ERL is capable of meeting the stringent requirements imposed by the use of a 10¹⁸/cm³ internal gas target proposed for the DarkLight experiment*. Minimal beamline modifications were made to create a machine configuration that is substantially different from those used in routine UV or IR FEL operation. A sustained (8 hour) high power beam run was performed, with clean transmission through a 2 mm transverse aperture of 127 mm length simulating the target configuration. A beam size of 50 um (rms) was measured near the center of the aperture. Experimental data from a week-long test run consistently exhibited beam loss of only a few ppm on the aperture while running 4.5 mA current at 100 MeV – or nearly 0.5 MW beam power. This surpassed the users’ expectation and demonstrated a unique capability of an ERL for this type of experiments. This report presents a summary of the experiment, a brief overview of our activities, and outlines future plans.
References:
* P. Fisher, et al.,“Jlab PR-11-008: A Proposal for the DarkLight Experiment at the Jefferson Laboratory Free Electron Laser.” http://www.jlab.org/exp_prog/proposals/11prop.html