IPAC2013 - List of Authors (Hurh, P.)

Paper	Title	Page
MOPEA073	Current Status of the LBNE Neutrino Beam	255
	C.D. Moore, K.R. Bourkland, C.F. Crowley, P. Hurh, J. Hylen, B.G. Lundberg, A. Marchionni, M.W. McGee, N.V. Mokhov, V. Papadimitriou, R.K. Plunkett, S.D. Reitzner, A.M. Stefanik, G. Velev, K.E. Williams, R.M. Zwaska Fermilab, Batavia, USA
	Funding: Work supported by the Fermilab Research Alliance, under contract DE-AC02-07CH11359 with the U.S. Dept of Energy. The Long Baseline Neutrino Experiment (LBNE) will utilize a neutrino beamline facility located at Fermilab. The facility is designed to aim a beam of neutrinos toward a detector placed in South Dakota. The neutrinos are produced in a three-step process. First, protons from the Main Injector hit a solid target and produce mesons. Then, the charged mesons are focused by a set of focusing horns into the decay pipe, towards the far detector. Finally, the mesons that enter the decay pipe decay into neutrinos. The parameters of the facility were determined by an amalgam of the physics goals, the Monte Carlo modeling of the facility, and the experience gained by operating the NuMI facility at Fermilab. The initial beam power is expected to be ~700 kW, however some of the parameters were chosen to be able to deal with a beam power of 2.3 MW. The LBNE Neutrino Beam has made significant changes to the initial design through consideration of numerous Value Engineering proposals and the current design is described.

THPFI082	Targetry Challenges at Megawatt Proton Accelerator Facilities	3484
	P. Hurh, K. Ammigan, B.D. Hartsell, R.S. Tschirhart Fermilab, Batavia, USA
	Funding: Operated by Fermi Research Alliance, LLC, under Contract No. DE-AC02- 07CH11359 with the U.S. Department of Energy. High intensity, multi-megawatt proton accelerator facilities, such as the proposed Project X at Fermilab, offer the opportunity to explore science in multiple experiments and programs simultaneously. The reliable operation of the associated target facilities is as critical to the success of the experimental program as the high intensity proton accelerator itself. The targetry requirements for the Project X experimental program range from 1 GeV, 1 MW, CW proton beam on a high-Z target (possibly liquid metal) to 120 GeV, 2.3 MW, pulsed proton beam on a low-Z target and include stringent, experiment-specific operating environments such as high magnetic fields from super-conducting magnets and/or moderator arrays for optimal neutronic production. Meeting the challenges presented by such wide-ranging and intertwined requirements calls for coordinated and cross-cutting R&D activities. Areas of interest applicable to many of the experimental facilities includes radiation damage, thermal shock, radiological protection, and target instrumentation. Descriptions of these challenges and Fermilab R&D activities to overcome these difficult challenges are presented.

THPFI083	Radiation Damage Study of Graphite and Carbon-carbon Composite Target Materials	3487
	P. Hurh, K. Ammigan, N.V. Mokhov Fermilab, Batavia, USA N. Simos BNL, Upton, Long Island, New York, USA
	Funding: Operated by Fermi Research Alliance, LLC, under Contract No. DE-AC02- 07CH11359 with the U.S. Department of Energy. Use of graphite and carbon-carbon composite materials as high intensity proton targets for neutrino production is currently thought to be limited by thermal and structural material properties degraded by exposure to high energy proton beam. Identification of these limits for various irradiation and thermal environments is critical to high intensity targets for future facilities and experiments. To this end, several types of amorphous graphite and one type of carbon-carbon (3D weave) composite were exposed to 180 MeV proton beam at the BNL BLIP facility. Irradiated samples were then thermally, ultra-sonic, and structurally tested and compared to un-irradiated samples. Results show significant changes in material properties even at very low damage levels (<0.09 DPA) and that significant interstitial annealing of these properties occurs at annealing temperatures only slightly above irradiation temperature. This points the way to optimizing target operating temperature to increase target lifetime. A description of the plan to explore radiation damage in target materials through the new RaDIATE collaboration (Radiation Damage In Accelerator Target Environments) is also presented.

Paper

Title

Page

Current Status of the LBNE Neutrino Beam

255

C.D. Moore, K.R. Bourkland, C.F. Crowley, P. Hurh, J. Hylen, B.G. Lundberg, A. Marchionni, M.W. McGee, N.V. Mokhov, V. Papadimitriou, R.K. Plunkett, S.D. Reitzner, A.M. Stefanik, G. Velev, K.E. Williams, R.M. Zwaska
Fermilab, Batavia, USA

Funding: Work supported by the Fermilab Research Alliance, under contract DE-AC02-07CH11359 with the U.S. Dept of Energy.
The Long Baseline Neutrino Experiment (LBNE) will utilize a neutrino beamline facility located at Fermilab. The facility is designed to aim a beam of neutrinos toward a detector placed in South Dakota. The neutrinos are produced in a three-step process. First, protons from the Main Injector hit a solid target and produce mesons. Then, the charged mesons are focused by a set of focusing horns into the decay pipe, towards the far detector. Finally, the mesons that enter the decay pipe decay into neutrinos. The parameters of the facility were determined by an amalgam of the physics goals, the Monte Carlo modeling of the facility, and the experience gained by operating the NuMI facility at Fermilab. The initial beam power is expected to be ~700 kW, however some of the parameters were chosen to be able to deal with a beam power of 2.3 MW. The LBNE Neutrino Beam has made significant changes to the initial design through consideration of numerous Value Engineering proposals and the current design is described.

THPFI082

Targetry Challenges at Megawatt Proton Accelerator Facilities

3484

P. Hurh, K. Ammigan, B.D. Hartsell, R.S. Tschirhart
Fermilab, Batavia, USA

Funding: Operated by Fermi Research Alliance, LLC, under Contract No. DE-AC02- 07CH11359 with the U.S. Department of Energy.
High intensity, multi-megawatt proton accelerator facilities, such as the proposed Project X at Fermilab, offer the opportunity to explore science in multiple experiments and programs simultaneously. The reliable operation of the associated target facilities is as critical to the success of the experimental program as the high intensity proton accelerator itself. The targetry requirements for the Project X experimental program range from 1 GeV, 1 MW, CW proton beam on a high-Z target (possibly liquid metal) to 120 GeV, 2.3 MW, pulsed proton beam on a low-Z target and include stringent, experiment-specific operating environments such as high magnetic fields from super-conducting magnets and/or moderator arrays for optimal neutronic production. Meeting the challenges presented by such wide-ranging and intertwined requirements calls for coordinated and cross-cutting R&D activities. Areas of interest applicable to many of the experimental facilities includes radiation damage, thermal shock, radiological protection, and target instrumentation. Descriptions of these challenges and Fermilab R&D activities to overcome these difficult challenges are presented.

THPFI083

Radiation Damage Study of Graphite and Carbon-carbon Composite Target Materials

3487

P. Hurh, K. Ammigan, N.V. Mokhov
Fermilab, Batavia, USA
N. Simos
BNL, Upton, Long Island, New York, USA

Funding: Operated by Fermi Research Alliance, LLC, under Contract No. DE-AC02- 07CH11359 with the U.S. Department of Energy.
Use of graphite and carbon-carbon composite materials as high intensity proton targets for neutrino production is currently thought to be limited by thermal and structural material properties degraded by exposure to high energy proton beam. Identification of these limits for various irradiation and thermal environments is critical to high intensity targets for future facilities and experiments. To this end, several types of amorphous graphite and one type of carbon-carbon (3D weave) composite were exposed to 180 MeV proton beam at the BNL BLIP facility. Irradiated samples were then thermally, ultra-sonic, and structurally tested and compared to un-irradiated samples. Results show significant changes in material properties even at very low damage levels (<0.09 DPA) and that significant interstitial annealing of these properties occurs at annealing temperatures only slightly above irradiation temperature. This points the way to optimizing target operating temperature to increase target lifetime. A description of the plan to explore radiation damage in target materials through the new RaDIATE collaboration (Radiation Damage In Accelerator Target Environments) is also presented.