IPAC2013 - List of Authors (Hubert, N.)

Paper	Title	Page
MOPEA006	Operation and Performance Upgrade of the SOLEIL Storage Ring	73
	A. Nadji, F. Bouvet, P. Brunelle, A. Buteau, L. Cassinari, M.-E. Couprie, N. Hubert, M. Labat, J.-F. Lamarre, P. Lebasque, A. Lestrade, A. Loulergue, P. Marchand, J.L. Marlats, L.S. Nadolski, R. Nagaoka, M.-A. Tordeux SOLEIL, Gif-sur-Yvette, France
	SOLEIL delivers photons to 26 beamlines and 3 new ones are under construction together with the femtoslicing project. Up to 5 filling patterns are available for the users including a low alpha mode; all of them are in Top-up injection. The beam current for the users has been increased to 430 mA in the multibunch mode. The Storage Ring (SR) is running with a new optics incorporating an additional quadrupole triplet in one long straight section. The beam position stability remains excellent. Vertical positions from the dipole X-BPMs have been included in the orbit feedbacks loop with very encouraging results. A feedback loop maintaining the emittance coupling close to 1% for any Insertion Devices (IDs) configuration has been implemented. Up to 25 very diverse IDs are now installed on the SR, and several others are under design or construction. In house developments are being carried out in several domains such as construction of SR dipole power supply spare and of 70 kW-500 MHz solid state amplifiers, design of a pulsed multipole magnet for injection, and a Robinson wiggler, as well as a feasibility study of a local reduction of the emittance in one of the long straight sections.

WEPME001	SOLEIL Beam Stability Status	2917
	N. Hubert, L. Cassinari, J.-C. Denard, M. Labat, J.-F. Lamarre, A. Nadji, L.S. Nadolski, D. Pédeau, M.-A. Tordeux SOLEIL, Gif-sur-Yvette, France
	This paper reports recent work for improving SOLEIL electron beam stability. X-BPMs from four bending magnet beamline frontends have been inserted in the global orbit feedback loops during user operation. The corresponding source point stabilities have improved and results are reported. Some of the new beamlines request more stringent stability than the existing ones. Their requirements are not only tighter for beam orbit but also for beam size and divergence stability. For these reasons, SOLEIL has decided to define beam quality criteria for each sensitive beamline. Then it can predict ahead of commissioning how well the beamline will likely perform. A feedback on the vertical emittance, measured by a pinhole camera, has been introduced in order to reduce beam size and divergence variations due to magnetic configuration changes of a few insertion devices.

Paper

Title

Page

Operation and Performance Upgrade of the SOLEIL Storage Ring

73

A. Nadji, F. Bouvet, P. Brunelle, A. Buteau, L. Cassinari, M.-E. Couprie, N. Hubert, M. Labat, J.-F. Lamarre, P. Lebasque, A. Lestrade, A. Loulergue, P. Marchand, J.L. Marlats, L.S. Nadolski, R. Nagaoka, M.-A. Tordeux
SOLEIL, Gif-sur-Yvette, France

SOLEIL delivers photons to 26 beamlines and 3 new ones are under construction together with the femtoslicing project. Up to 5 filling patterns are available for the users including a low alpha mode; all of them are in Top-up injection. The beam current for the users has been increased to 430 mA in the multibunch mode. The Storage Ring (SR) is running with a new optics incorporating an additional quadrupole triplet in one long straight section. The beam position stability remains excellent. Vertical positions from the dipole X-BPMs have been included in the orbit feedbacks loop with very encouraging results. A feedback loop maintaining the emittance coupling close to 1% for any Insertion Devices (IDs) configuration has been implemented. Up to 25 very diverse IDs are now installed on the SR, and several others are under design or construction. In house developments are being carried out in several domains such as construction of SR dipole power supply spare and of 70 kW-500 MHz solid state amplifiers, design of a pulsed multipole magnet for injection, and a Robinson wiggler, as well as a feasibility study of a local reduction of the emittance in one of the long straight sections.

WEPME001

SOLEIL Beam Stability Status

2917

N. Hubert, L. Cassinari, J.-C. Denard, M. Labat, J.-F. Lamarre, A. Nadji, L.S. Nadolski, D. Pédeau, M.-A. Tordeux
SOLEIL, Gif-sur-Yvette, France

This paper reports recent work for improving SOLEIL electron beam stability. X-BPMs from four bending magnet beamline frontends have been inserted in the global orbit feedback loops during user operation. The corresponding source point stabilities have improved and results are reported. Some of the new beamlines request more stringent stability than the existing ones. Their requirements are not only tighter for beam orbit but also for beam size and divergence stability. For these reasons, SOLEIL has decided to define beam quality criteria for each sensitive beamline. Then it can predict ahead of commissioning how well the beamline will likely perform. A feedback on the vertical emittance, measured by a pinhole camera, has been introduced in order to reduce beam size and divergence variations due to magnetic configuration changes of a few insertion devices.