Author: Gerstl, S.
Paper Title Page
WEPWA006 Beam Heat Load Measurements with COLDDIAG at the Diamond Light Source 2135
  • S. Gerstl, S. Casalbuoni, A.W. Grau, T. Holubek, D. Saez de Jauregui, R. Voutta
    KIT, Eggenstein-Leopoldshafen, Germany
  • R. Bartolini, M.P. Cox, E.C. Longhi, G. Rehm, J.C. Schouten, R.P. Walker
    Diamond, Oxfordshire, United Kingdom
  • M. Migliorati, B. Spataro
    INFN/LNF, Frascati (Roma), Italy
  Understanding the heat load from an electron beam is still an open issue for the cryogenic design of superconducting insertion devices. COLDDIAG, a cold vacuum chamber for diagnostics was designed and built specially for this purpose. With the equipped instrumentation, which covers temperature sensors, pressure gauges, mass spectrometers as well as retarding field analyzers it is possible to measure the beam heat load, total pressure, and gas content as well as the net flux and energy of particles hitting the chamber walls. Following a failure after its first installation in November 2011, COLDDIAG was subsequently reinstalled in the Diamond storage ring in August 2012. We report on the preliminary results that have been obtained since then.  
WEPWA007 First Tests with a Local and Integral Magnetic Field Measurement Setup for Conduction Cooled Superconducting Undulator Coils 2138
  • A.W. Grau, S. Casalbuoni, S. Gerstl, N. Glamann, T. Holubek, D. Saez de Jauregui
    KIT, Eggenstein-Leopoldshafen, Germany
  The magnetic field quality of insertion devices (IDs) has a significant influence on their performance. Therefore it is essential to characterize their magnetic properties and perform precise field measurements before installation in synchrotron light sources. Particularly for permanent magnet IDs the magnetic field measurement technology made significant progress during the last years and pushed the capabilities of synchrotron light sources. Even though for superconducting IDs the measurement settings are far more challenging similar major developments are required. As a part of our R&D program on superconducting IDs we perform quality assessment of their magnetic field properties. This contribution describes details, challenges and the first tests with the measurement equipment configurations to perform measurements of the integral and local magnetic field distributions of superconducting undulator coils up to 2 m length, in a cold (4.2 K), in-vacuum and cryogen free environment.