IPAC2013 - List of Authors (Boccone, V.)

Paper

Title

Page

Simulations and Measurements of Cleaning with 100 MJ Beams in the LHC

52

R. Bruce, R.W. Aßmann, V. Boccone, C. Bracco, M. Cauchi, F. Cerutti, D. Deboy, A. Ferrari, L. Lari, A. Marsili, A. Mereghetti, E. Quaranta, S. Redaelli, G. Robert-Demolaize, A. Rossi, B. Salvachua, E. Skordis, G. Valentino, V. Vlachoudis, Th. Weiler, D. Wollmann
CERN, Geneva, Switzerland
L. Lari
IFIC, Valencia, Spain
E. Quaranta
Politecnico/Milano, Milano, Italy
G. Valentino
University of Malta, Information and Communication Technology, Msida, Malta

The CERN Large Hadron Collider is routinely storing proton beam intensities of more than 100 MJ, which puts extraordinary demands on the control of beam losses to avoid quenches of the superconducting magnets. Therefore, a detailed understanding of the LHC beam cleaning is required. We present tracking and shower simulations of the LHC's multi-stage collimation system and compare with measured beam losses, which allow us to conclude on the predictive power of the simulations.

Slides MOODB202 [6.343 MB]

THPFI046

First Results of an Experiment on Advanced Collimator Materials at CERN HiRadMat Facility

3391

A. Bertarelli, O. Aberle, R.W. Aßmann, E. Berthomé, V. Boccone, M. Calderón Cueva, F. Carra, F. Cerutti, N. Charitonidis, C. Charrondière, A. Dallocchio, M. Donzé, P. Francon, M. Garlaschè, L. Gentini, M. Guinchard, N. Mariani, A. Masi, P. Moyret, S. Redaelli, A. Rossi, S.D.M. dos Santos
CERN, Geneva, Switzerland
M. Calderón Cueva
Universidad San Francisco de Quito, Cumbayá, Colombia
N. Charitonidis
EPFL, Lausanne, Switzerland
L. Peroni, M. Scapin
Politecnico di Torino, Torino, Italy

Funding: The research leading to these results has received funding from the European Commission under the FP7 Research Infrastructures project EuCARD, grant agreement no. 227579
A comprehensive, first-of-its-kind experiment (HRMT-14) has been recently carried out at CERN HiRadMat facility on six different materials of interest for Beam Intercepting Devices (collimators, targets, dumps). Both traditional materials (Mo, W and Cu alloys) as well as advanced metal/diamond and metal/graphite composites were tested under extreme conditions as to pressure, density and temperature, leading to the development of highly dynamic phenomena as shock-waves, spallation, explosions. Experimental data were acquired, mostly in real time, relying on extensive embarked instrumentation (strain gauges, temperature and vacuum sensors) and on remote acquisition devices (laser Doppler vibrometer and high speed camera). The experiment was a success under all points of view in spite of the technological challenges and harsh environment. First measurements are in good agreement with results of complex simulations, confirming the effectiveness of the acquisition system and the reliability of advanced numerical methods when material constitutive models are completely available. Interesting information has been collected as to thermal shock robustness of tested materials.

Paper	Title	Page
MOODB202	Simulations and Measurements of Cleaning with 100 MJ Beams in the LHC	52
	R. Bruce, R.W. Aßmann, V. Boccone, C. Bracco, M. Cauchi, F. Cerutti, D. Deboy, A. Ferrari, L. Lari, A. Marsili, A. Mereghetti, E. Quaranta, S. Redaelli, G. Robert-Demolaize, A. Rossi, B. Salvachua, E. Skordis, G. Valentino, V. Vlachoudis, Th. Weiler, D. Wollmann CERN, Geneva, Switzerland L. Lari IFIC, Valencia, Spain E. Quaranta Politecnico/Milano, Milano, Italy G. Valentino University of Malta, Information and Communication Technology, Msida, Malta
	The CERN Large Hadron Collider is routinely storing proton beam intensities of more than 100 MJ, which puts extraordinary demands on the control of beam losses to avoid quenches of the superconducting magnets. Therefore, a detailed understanding of the LHC beam cleaning is required. We present tracking and shower simulations of the LHC's multi-stage collimation system and compare with measured beam losses, which allow us to conclude on the predictive power of the simulations.
	Slides MOODB202 [6.343 MB]

THPFI046	First Results of an Experiment on Advanced Collimator Materials at CERN HiRadMat Facility	3391
	A. Bertarelli, O. Aberle, R.W. Aßmann, E. Berthomé, V. Boccone, M. Calderón Cueva, F. Carra, F. Cerutti, N. Charitonidis, C. Charrondière, A. Dallocchio, M. Donzé, P. Francon, M. Garlaschè, L. Gentini, M. Guinchard, N. Mariani, A. Masi, P. Moyret, S. Redaelli, A. Rossi, S.D.M. dos Santos CERN, Geneva, Switzerland M. Calderón Cueva Universidad San Francisco de Quito, Cumbayá, Colombia N. Charitonidis EPFL, Lausanne, Switzerland L. Peroni, M. Scapin Politecnico di Torino, Torino, Italy
	Funding: The research leading to these results has received funding from the European Commission under the FP7 Research Infrastructures project EuCARD, grant agreement no. 227579 A comprehensive, first-of-its-kind experiment (HRMT-14) has been recently carried out at CERN HiRadMat facility on six different materials of interest for Beam Intercepting Devices (collimators, targets, dumps). Both traditional materials (Mo, W and Cu alloys) as well as advanced metal/diamond and metal/graphite composites were tested under extreme conditions as to pressure, density and temperature, leading to the development of highly dynamic phenomena as shock-waves, spallation, explosions. Experimental data were acquired, mostly in real time, relying on extensive embarked instrumentation (strain gauges, temperature and vacuum sensors) and on remote acquisition devices (laser Doppler vibrometer and high speed camera). The experiment was a success under all points of view in spite of the technological challenges and harsh environment. First measurements are in good agreement with results of complex simulations, confirming the effectiveness of the acquisition system and the reliability of advanced numerical methods when material constitutive models are completely available. Interesting information has been collected as to thermal shock robustness of tested materials.