IPAC2013 - List of Authors (Bocchetta, C.J.)

Paper	Title	Page
MOPEA046	Solaris Project Progress	181
	A.I. Wawrzyniak, C.J. Bocchetta, P.B. Borowiec, D. Einfeld, P.P. Goryl, M. Młynarczyk, R. Nietubyć, M.P. Nowak, W. Soroka, M.J. Stankiewicz, P. Szostak, P.S. Tracz, Ł. Walczak, K. Wawrzyniak, J.J. Wiechecki, M. Zając, Ł. Żytniak Solaris, Kraków, Poland D. Einfeld MAX-lab, Lund, Sweden R. Nietubyć NCBJ, Świerk/Otwock, Poland
	Funding: Work supported by the European Regional Development Fund within the frame of the Innovative Economy Operational Program:POIG.02.01.00-12-213/09 Solaris is a 3rd generation light source facility being built in Kraków, Poland at the Jagiellonian University Campus. The project is being accomplished in a tight collaboration with the MAX IV Laboratory in Lund, Sweden. The Solaris 1.5 GeV storage ring is a replica of the MAX IV 1.5 GeV machine, whereas the injector and the transfer line although based on the same components, are unique for Solaris. One of the main differences is the 600 MeV injection energy requiring an energy ramp in the storage ring to the final operating energy of 1.5 GeV. The construction of the facility started in early 2010 and is planned to be finished in the autumn 2014. Up to now, 70% of the components have been procured and construction of the buildings in progress with expected handover in autumn 2013. This paper will give an update on infrastructure progress and design choices for shielding, service area placement of racks and routing of piping and cables. An update is also presented of machine layout that includes the injector, transfer line and storage ring.

MOPEA047	Ramping of the Solaris Storage Ring Achromat	184
	A.I. Wawrzyniak, C.J. Bocchetta, D. Einfeld, R. Nietubyć Solaris, Kraków, Poland D. Einfeld MAX-lab, Lund, Sweden R. Nietubyć NCBJ, Świerk/Otwock, Poland
	Funding: Work supported by the European Regional Development Fund within the frame of the Innovative Economy Operational Program:POIG.02.01.00-12-213/09, The combined function magnets implemented for the MAX IV and Solaris 1.5 GeV storage ring double bend achromats (DBAs) represents a challenging task in magnetic design. The constituent magnets in the DBA block may be sensitive to saturation effects which must be accounted for, especially in the case of energy ramping, as is the case for Solaris and not for MAXIV, where injection will take place at a beam energy of 0.55-0.6 GeV. The magnetic field distribution was calculated as a function of energy in the range from 0.5 GeV up to 1.5 GeV for the gradient dipole and for the quadrupoles containing a sextupole component. Results show that for the dipole, which generates the strongest field, the relative change of quadrupole strength is lower than 4.10^-3. For the quadrupoles the sextupole component is within the relative range of less than 0.7.10-4. The impact on linear and non-linear optics at low energies has been accordingly studied. This is on-going studies and only preliminary results are presented in this paper.

Paper

Title

Page

Solaris Project Progress

181

A.I. Wawrzyniak, C.J. Bocchetta, P.B. Borowiec, D. Einfeld, P.P. Goryl, M. Młynarczyk, R. Nietubyć, M.P. Nowak, W. Soroka, M.J. Stankiewicz, P. Szostak, P.S. Tracz, Ł. Walczak, K. Wawrzyniak, J.J. Wiechecki, M. Zając, Ł. Żytniak
Solaris, Kraków, Poland
D. Einfeld
MAX-lab, Lund, Sweden
R. Nietubyć
NCBJ, Świerk/Otwock, Poland

Funding: Work supported by the European Regional Development Fund within the frame of the Innovative Economy Operational Program:POIG.02.01.00-12-213/09
Solaris is a 3rd generation light source facility being built in Kraków, Poland at the Jagiellonian University Campus. The project is being accomplished in a tight collaboration with the MAX IV Laboratory in Lund, Sweden. The Solaris 1.5 GeV storage ring is a replica of the MAX IV 1.5 GeV machine, whereas the injector and the transfer line although based on the same components, are unique for Solaris. One of the main differences is the 600 MeV injection energy requiring an energy ramp in the storage ring to the final operating energy of 1.5 GeV. The construction of the facility started in early 2010 and is planned to be finished in the autumn 2014. Up to now, 70% of the components have been procured and construction of the buildings in progress with expected handover in autumn 2013. This paper will give an update on infrastructure progress and design choices for shielding, service area placement of racks and routing of piping and cables. An update is also presented of machine layout that includes the injector, transfer line and storage ring.

MOPEA047

Ramping of the Solaris Storage Ring Achromat

184

A.I. Wawrzyniak, C.J. Bocchetta, D. Einfeld, R. Nietubyć
Solaris, Kraków, Poland
D. Einfeld
MAX-lab, Lund, Sweden
R. Nietubyć
NCBJ, Świerk/Otwock, Poland

Funding: Work supported by the European Regional Development Fund within the frame of the Innovative Economy Operational Program:POIG.02.01.00-12-213/09,
The combined function magnets implemented for the MAX IV and Solaris 1.5 GeV storage ring double bend achromats (DBAs) represents a challenging task in magnetic design. The constituent magnets in the DBA block may be sensitive to saturation effects which must be accounted for, especially in the case of energy ramping, as is the case for Solaris and not for MAXIV, where injection will take place at a beam energy of 0.55-0.6 GeV. The magnetic field distribution was calculated as a function of energy in the range from 0.5 GeV up to 1.5 GeV for the gradient dipole and for the quadrupoles containing a sextupole component. Results show that for the dipole, which generates the strongest field, the relative change of quadrupole strength is lower than 4.10^-3. For the quadrupoles the sextupole component is within the relative range of less than 0.7.10-4. The impact on linear and non-linear optics at low energies has been accordingly studied. This is on-going studies and only preliminary results are presented in this paper.