Author: Ostroumov, P.N.
Paper Title Page
MOEPPB006 Formation of Beams in the Ion Accelerator Complex of the Medium Energy Electron Ion Collider Facility at JLab 88
 
  • S.L. Manikonda, P.N. Ostroumov
    ANL, Argonne, USA
  • B. Erdelyi
    Northern Illinois University, DeKalb, Illinois, USA
 
  Funding: This work was supported by the U.S. Department of Energy, Office of Nuclear Physics, under Contract No. DE-AC02-06CH11357.
At the interaction point of the Medium Energy Electron Ion Collider (MEIC) facility the luminosity of 1033cm-2s-1 will be achieved through the collision of counter rotating beams of 0.5A ions and 3A electrons at 750MHz frequency. Formation of ion beams at MEIC is carried out in the Ion Accelerator Complex (IAC) comprising of a linac, pre-booster ring, booster ring, and a collider ring. We will describe the scheme proposed for the formation of ion beams at MEIC facility from the point of view of longitudinal beam dynamics. The proposed scheme minimizes losses due to space charge effects at low energies and needs moderate RF requirements already achieved at other existing facilities. Simulation studies have been conducted to verify the proposed scheme. We will present the results of these simulation studies.
 
 
WEPPC035 Design and Construction of a High-Power RF Coupler for PXIE 2284
 
  • M.P. Kelly, Z.A. Conway, M. Kedzie, S.V. Kutsaev, P.N. Ostroumov
    ANL, Argonne, USA
  • S. Nagaitsev
    Fermilab, Batavia, USA
 
  A power coupler has been designed and built at Argonne National Laboratory for use with the Project X Injector Experiment (PXIE) 162.5 MHz superconducting (SC) half-wave cavities. The 50 Ω coaxial capacitive coupler will be required to operate CW with up to 10 kW of forward power under any condition for the reflected power. A key feature is a moveable copper plated stainless steel bellows which will permit up to 3 cm of axial stroke and adjustment of Qext by roughly one order of magnitude in the range of 10-5 to 10-6. The mechanical and vacuum design will include two ceramic windows, one operating at room temperature and another at 70 Kelvin. The two window design allows the portion of the coupler assembled to the SC cavity in the clean room to be compact and readily cleanable. We present other design features including thermal intercepts to provide a large margin for RF heating and a mechanical guide assembly to operate cold and under vacuum with high reliability.  
 
WEPPC036 Electromagnetic Design of 15 kW CW RF Input Coupler 2286
 
  • S.V. Kutsaev, M.P. Kelly, P.N. Ostroumov
    ANL, Argonne, USA
 
  Funding: This work was supported by the U.S. Department of Energy, Office of Nuclear Physics, under Contract No. DE-AC02-06CH11357.
A new power coupler is under development at Argonne National Laboratory for a cw 40 MeV proton/deuteron linac for the SARAF project in Israel. This linac requires one 15 kW RF input power per superconducting cavity. Two different cavity options are still under consideration: 109 MHz quarter-waves and 176 MHz half-waves. A coaxial capacitive input coupler has been designed and analyzed for these purposes. This paper presents the results of 3D electromagnetic simulations of this coupler together with the cavities mentioned above. An analysis of multipacting in the couplers is also presented.
 
 
WEPPC037 A Ring-shaped Center Conductor Geometry for a Half-wave Resonator 2289
 
  • B. Mustapha, Z.A. Conway, P.N. Ostroumov
    ANL, Argonne, USA
 
  Funding: This work was supported by the U.S. Department of Energy, Office of Nuclear Physics, under Contract DE-AC02-06CH11357.
Half-wave resonators (HWR) are used and being proposed for the acceleration of high-intensity proton and heavy-ion beams in the 0.1 < β < 0.5 velocity range. The highest performing half-wave resonator geometries use a center conductor with a race-track shaped cross section in the high-electric field region; a feature shared with spoke cavities which are also being proposed for the same velocity regime. We here propose a ring-shaped center conductor instead of the race-track shape. Preliminary studies show that the ring geometry has a similar peak surface electric field as the race-track one, but has several other advantages. In particular, the ring-shaped geometry has: a lower peak surface magnetic field, a much higher Shunt impedance for the same peak fields, and no quadrupole electric field asymmetry which has been observed in the race-track geometry. In a solenoid-based symmetric focusing, the quadrupole component may lead to unnecessary emittance growth which is not acceptable in high-intensity ion linacs. We will present a detailed comparison and a discussion of the two geometries.
 
 
WEPPC039 Development of a Half-Wave Resonator for Project X 2295
 
  • P.N. Ostroumov, Z.A. Conway, R.L. Fischer, S.M. Gerbick, M. Kedzie, M.P. Kelly, B. Mustapha
    ANL, Argonne, USA
  • I.V. Gonin, S. Nagaitsev
    Fermilab, Batavia, USA
 
  Funding: This work was supported by the U.S. Department of Energy, Office of High Energy Physics and Nuclear Physics, under Contract DE-AC02-76CH03000 and DE-AC02-06CH11357.
We have developed an optimized electromagnetic and mechanical design of a 162.5 MHz half-wave resonator (HWR) suitable for acceleration of high-intensity proton or H-minus beams in the energy range from 2 MeV to 10 MeV. The cavity design is based on recent advances in SRF technology for TEM-class structures being developed at ANL. Highly optimized EM parameters were achieved by adjusting the shapes of both inner and outer conductors. This new design will be processed with a new HWR horizontal electropolishing system after all mechanical work on the cavity including the welding of the helium jacket is complete. The prototype HWR is being fabricated by domestic vendors under ANL’s supervision.
 
 
WEPPC047 Effects of the RF Field Asymmetry in SC Cavities of the Project X 2318
 
  • I.V. Gonin, M.H. Awida, P. Berrutti, A. Saini, B.G. Shteynas, N. Solyak, V.P. Yakovlev
    Fermilab, Batavia, USA
  • P.N. Ostroumov
    ANL, Argonne, USA
 
  The low-energy SCRF section of CW SC linac of Project X starts from Half Wave Resonators (HWR) having operating frequency f=162.5 MHz, optimal β= 0.11 and will accelerate the beam from 2 MeV up to 11 MeV. The preliminary analysis of beam dynamics shows that multipole effects caused by asymmetry of RF fields in HWR cavities aren’t negligible. In this paper we present the analysis of influence of multipole effects on beam dynamics and discuss the possible solutions how to compensate these effects.  
 
TUPPR082 MEIC Design Progress 2014
 
  • Y. Zhang, Y.S. Derbenev, D. Douglas, A. Hutton, G.A. Krafft, R. Li, F. Lin, V.S. Morozov, E.W. Nissen, F.C. Pilat, T. Satogata, C. Tennant, B. Terzić, B.C. Yunn
    JLAB, Newport News, Virginia, USA
  • D.P. Barber
    DESY, Hamburg, Germany
  • Y. Filatov
    JINR, Dubna, Russia
  • C. Hyde
    Old Dominion University, Norfolk, Virginia, USA
  • A.M. Kondratenko
    Science and Technique Laboratory Zaryad, Novosibirsk, Russia
  • S.L. Manikonda, P.N. Ostroumov
    ANL, Argonne, USA
  • M.K. Sullivan
    SLAC, Menlo Park, California, USA
 
  Funding: Supported by the U.S. Department of Energy, Office of Nuclear Physics, under Contract No. DE-AC05-06OR23177 and No. DE-AC02-06CH11357.
This paper will report the recent progress in the conceptual design of MEIC, a high luminosity medium energy polarized ring-ring electron-ion collider at Jefferson lab. The topics and achievements that will be covered are design of the ion large booster and the ERL-circulator-ring-based electron cooling facility, optimization of chromatic corrections and dynamic aperture studies, schemes and tracking simulations of lepton and ion polarization in the figure-8 collider ring, and the beam-beam and electron cooling simulations. A proposal of a test facility for the MEIC electron cooler will also be discussed.
 
 
THPPP054 A New Half-Wave Resonator Cryomodule Design for Project-X 3865
 
  • Z.A. Conway, A.O. Bergado, R.L. Fischer, M. Kedzie, M.P. Kelly, B. Mustapha, P.N. Ostroumov
    ANL, Argonne, USA
  • V.A. Lebedev
    Fermilab, Batavia, USA
 
  Funding: This work was supported by the U.S. Department of Energy, Office of High Energy Physics and Nuclear Physics, under Contract DE-AC02-76CH03000 and DE-AC02-06CH11357.
We present the current status of our Project-X half-wave resonator cryomodule development effort. The Project-X injector requires a single cryomodule with 9 superconducting, 162.5-MHz, β = 0.11, half-wave resonators interleaved with 6 integrated superconducting solenoids/steering coils. This cryomodule is being designed and build by ANL with the intent of delivering a device which has all external connections to the cryogenic, RF, and instrumentation systems located at removable junctions separated from the clean cavity vacuum system. Issues include the ease of assembly, cavity cleanliness, interfacing to subsystems (e.g., cryogenics, couplers, tuners, etc.), and satisfying the ANL/FNAL/DOE guidelines for vacuum vessels. We employ proven warm-to-cold low-particulate beamline transitions to minimize unused space along the linac, a top-loading box design that minimizes the size of the clean room assembly, and compact beamline devices to minimize the length of the focusing period.
 
 
THPPP058 PXIE: Project X Injector Experiment 3874
 
  • S. Nagaitsev, S.D. Holmes, R.D. Kephart, J.S. Kerby, V.A. Lebedev, C.S. Mishra, A.V. Shemyakin, N. Solyak, R.P. Stanek
    Fermilab, Batavia, USA
  • D. Li
    LBNL, Berkeley, California, USA
  • P.N. Ostroumov
    ANL, Argonne, USA
 
  A multi-MW proton facility, Project X has been proposed and is currently under development at Fermilab. As part of this development program, we are constructing a prototype of the front end of the Project X linac at Fermilab. The construction and successful operations of this facility will validate the concept for the Project X front end, thereby minimizing the primary technical risk element within the Project. The Project X Injector Experiment (PXIE) can be constructed over the period FY12-16 and will include an H ion source, a CW 2.1-MeV RFQ and two SC cryomodules providing up to 30 MeV energy gain at an average beam current of 1 mA. Successful operations of the facility will demonstrate the viability of novel front end technologies that will find applications beyond Project X in the longer term.