IPAC2012 - List of Authors (Eriksson, M.)

Paper	Title	Page
TUPPC025	Solaris Storage Ring Lattice Optimization with Strong Insertion Devices	1218
	A.I. Wawrzyniak, C.J. Bocchetta Solaris, Kraków, Poland M. Eriksson, S.C. Leemann MAX-lab, Lund, Sweden
	Funding: Work supported by the European Regional Development Fund within the frame of the Innovative Economy Operational Program: POIG.02.01.00-12-213/09 The Solaris synchrotron light facility under construction in Kraków will be a replica of the 1.5 GeV storage ring of MAX IV. This compact 3rd generation light source has been designed to have an emittance of 6 nmrad and operate with 500 mA stored current for VUV and soft X-Rays production. The lattice design consists of 12 Double Bend Achromats (DBA) with each DBA cell integrated into one solid iron block. Twelve 3.5 m long straight sections are available of which 10 will be equipped in various insertion devices. These devices will differ from those adopted by MAX IV. For X-ray production one or more superconducting wigglers will be used, while APPLE II type undulators will be used for variable polarised light production. The linear and nonlinear lattice dynamics have been studied with these perturbing insertion devices included in the ring and results are presented in this paper.

TUPPD065	An Electron Gun Test Stand to Prepare for the MAX IV Project	1551
	S. Werin, E. Elafifi, M. Eriksson, D. Kumbaro, F. Lindau, S. Thorin MAX-lab, Lund, Sweden E. Mansten Lund University, Division of Atomic Physics, Lund, Sweden
	The MAX IV facility, currently under construction, will include a 3 GeV linac injector with two RF guns providing beams for the two operations modes: ring injection and the Short Pulse Facility. The ring injection will be done by a thermionic 3 GHz RF gun developing from the current MAX-lab RF gun. The SPF gun will be a laser driven photo cathode 3 GHz RF gun based on the 1.6 cell BNL/SLAC type. The guns will be operated with short (0.7 us) RF pulses from a SLED system. A test stand to fine tune the operation of the two different systems has been assembled at the MAX IV laboratory (former MAX-lab). The experience in RF commissioning and initial measurements of energy, charge and quantum efficiency will be reported and the extension of the test stand for full emittance characterization will be outlined.

Paper

Title

Page

Solaris Storage Ring Lattice Optimization with Strong Insertion Devices

1218

A.I. Wawrzyniak, C.J. Bocchetta
Solaris, Kraków, Poland
M. Eriksson, S.C. Leemann
MAX-lab, Lund, Sweden

Funding: Work supported by the European Regional Development Fund within the frame of the Innovative Economy Operational Program: POIG.02.01.00-12-213/09
The Solaris synchrotron light facility under construction in Kraków will be a replica of the 1.5 GeV storage ring of MAX IV. This compact 3rd generation light source has been designed to have an emittance of 6 nmrad and operate with 500 mA stored current for VUV and soft X-Rays production. The lattice design consists of 12 Double Bend Achromats (DBA) with each DBA cell integrated into one solid iron block. Twelve 3.5 m long straight sections are available of which 10 will be equipped in various insertion devices. These devices will differ from those adopted by MAX IV. For X-ray production one or more superconducting wigglers will be used, while APPLE II type undulators will be used for variable polarised light production. The linear and nonlinear lattice dynamics have been studied with these perturbing insertion devices included in the ring and results are presented in this paper.

TUPPD065

An Electron Gun Test Stand to Prepare for the MAX IV Project

1551

S. Werin, E. Elafifi, M. Eriksson, D. Kumbaro, F. Lindau, S. Thorin
MAX-lab, Lund, Sweden
E. Mansten
Lund University, Division of Atomic Physics, Lund, Sweden

The MAX IV facility, currently under construction, will include a 3 GeV linac injector with two RF guns providing beams for the two operations modes: ring injection and the Short Pulse Facility. The ring injection will be done by a thermionic 3 GHz RF gun developing from the current MAX-lab RF gun. The SPF gun will be a laser driven photo cathode 3 GHz RF gun based on the 1.6 cell BNL/SLAC type. The guns will be operated with short (0.7 us) RF pulses from a SLED system. A test stand to fine tune the operation of the two different systems has been assembled at the MAX IV laboratory (former MAX-lab). The experience in RF commissioning and initial measurements of energy, charge and quantum efficiency will be reported and the extension of the test stand for full emittance characterization will be outlined.