Author: Chu, Y.L.
Paper Title Page
THPPD015 Character and Performance of Magnets for the TPS Storage Ring 3527
  • J.C. Jan, C.-H. Chang, H.-H. Chen, Y.L. Chu, C.-S. Hwang, C.Y. Kuo, F.-Y. Lin, C.S. Yang, Y.T. Yu
    NSRRC, Hsinchu, Taiwan
  The Taiwan Photon Source (TPS) is a third-generation light source. The orbit of the electron beam will be controlled with 48 dipoles, 240 quadrupoles, 168 sextupoles and several correctors in the storage ring. The construction of the first magnets for one sector, including prototype magnets, is to be completed during 2011 December. The mechanical dimensions of these magnets have been examined on a precise 3D-coordinate-measuring machine (CMM). The field strength, effective length and multipole errors were inspected with a rotating-coil measurement system (RCS) and a Hall-probe measurement system (HPS). The field center of the quadrupole and sextupole magnets is shimmed with a precise shimming block on the RCS bench. The inaccuracy of the position of the field center will be within 0.01 mm after shimming the feet. This work reports the current status, the construction performance, the mechanical shimming algorithm and the relative construction issue of the high precision magnet.  
THPPD058 Reduction of Conductive EMI Noise Resulted from the Commercial Power Supply 3644
  • C.S. Chen, C.K. Chan, J.-C. Chang, Y.L. Chu, K.H. Hsu, C.Y. Kuo, Y.-H. Liu, C.S. Yang
    NSRRC, Hsinchu, Taiwan
  Almost every electronic equipment must be connected to power system. Because of the complexity of power lines, the reduction of conductive electro-magnetic interference (C-EMI) plays an important role in precise measurements. In this paper, a line impedance stabilization network (LISN) was built up to get the spectrum from power lines. After several measurements by some commercial power supplies, it is found that some of these power supplies induce effectively C-EMI into power lines, even if a passive filter is bound in power line. These noises may influence numerous equipments in a local area near the sources. Therefore, how to choose a suitable filter is a decisive factor to reduce the magnitude of C-EMI.