Author: Chae, M.S.
Paper Title Page
TUPPP060 Injector Design for PAL-XFEL Project 1732
 
  • J.H. Han, M.S. Chae, J.H. Hong, I. Hwang, H.-S. Kang, I.S. Ko, S.J. Park
    PAL, Pohang, Kyungbuk, Republic of Korea
 
  Funding: The Ministry of Education, Science and Technology of the Korean Government
The PAL-XFEL project has the baseline specification of FEL radiation down to 0.1 nm with a 10 GeV S-band normal conducting linac. To fulfill the requirement of the beam parameter, the S-band photoinjector was designed. Numerical optimizations for nominal and low charge operations are presented.
 
 
TUPPD061 High-Power RF Test of an RF-Gun for PAL-XFEL 1539
 
  • J.H. Hong, J.H. Han, H.-S. Kang, C. Kim, S.H. Kim, C.-K. Min, S.S. Park, S.J. Park, Y.J. Park
    PAL, Pohang, Kyungbuk, Republic of Korea
  • M.S. Chae, I.S. Ko, Y.W. Parc
    POSTECH, Pohang, Kyungbuk, Republic of Korea
 
  A photocathode RF-gun for the X-ray free electron laser (XFEL) at the Pohang Accelerator Laboratory (PAL) has been fabricated and tested at PAL. This RF-gun is based on a 1.6-cell cavity with dual-feed waveguide ports and two pumping ports. The RF gun was designed by PAL and POSTECH. The RF-gun has been successfully tested with a cathode electric field gradient up to 126MV/m at a repetition rate of 30 Hz. This paper reports the recent results on the beam test of the RF-gun with high power RF at the gun test facility. We present and discuss the measurements of the basic beam parameters such as charge, energy, energy spread, and transverse emittance.