ICALEPCS2017 - List of Authors (Yuan, Y.J.)

Paper	Title	Page
TUPHA012	New Control System for LAPECR2	394
	J.J. Chang, S. An, X.J. Liu, P.P. Wang, Y.J. Yuan, W. Zhang IMP/CAS, Lanzhou, People's Republic of China
	Lanzhou All Permanent magnet ECR ion source No.2 (LAPECR2) is the ion source for 320 kV multidiscipline research platform for highly charged ions. Its old control system has been used for nearly 12 years and some prob-lems have been gradually exposed and affected its daily operation. A set of PLC from Beckhoff company is in charge of the control of magnet power supplies, diagnos-tics and motion control. EPICS and Control System Studio (CSS) as well other packages are used in this facility as the control software toolkit. Based on these state-of-the-art technologies on both hardware and software, this paper designed and implemented a new control system for LAPECR2. After about half a year of running, the new control reflects its validity and stability in this facility.
	Poster TUPHA012 [0.332 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUPHA012
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA082	The Timing System of HIRFL-CSR	601
	W. Zhang, S. An, S.Z. Gou, K. Gu, P. Li, Y.J. Yuan, M. Yue IMP/CAS, Lanzhou, People's Republic of China
	This article gives a brief description of the timing system for Heavy Ion Research Facility in Lanzhou- Cooler Storage Ring (HIRFL-CSR). It introduces in detail mainly of the timing system architecture, hardware and software. We use standard event system architecture. The system is mainly composed of the events generator (EVG), the events receiver (EVR) and the events fan-out module. The system is the standard three-layer structure. OPI layer realizes generated and monitoring for the events. The intermediate layer is the events transmission and fan out. Device control layer performs the interpretation of the events. We adopt our R&D EVG to generate the events of virtual accelerator. At the same time, we have used our own design events fan-out module and realize distributed on the events. In equipment control layer, we use EVR design based on FPGA to interpret the events of different equipment and achieve an orderly work. The Timing System realize the ion beam injection, acceleration and extraction.
	Poster TUPHA082 [0.394 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUPHA082
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

New Control System for LAPECR2

394

J.J. Chang, S. An, X.J. Liu, P.P. Wang, Y.J. Yuan, W. Zhang
IMP/CAS, Lanzhou, People's Republic of China

Lanzhou All Permanent magnet ECR ion source No.2 (LAPECR2) is the ion source for 320 kV multidiscipline research platform for highly charged ions. Its old control system has been used for nearly 12 years and some prob-lems have been gradually exposed and affected its daily operation. A set of PLC from Beckhoff company is in charge of the control of magnet power supplies, diagnos-tics and motion control. EPICS and Control System Studio (CSS) as well other packages are used in this facility as the control software toolkit. Based on these state-of-the-art technologies on both hardware and software, this paper designed and implemented a new control system for LAPECR2. After about half a year of running, the new control reflects its validity and stability in this facility.

Poster TUPHA012 [0.332 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUPHA012

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPHA082

The Timing System of HIRFL-CSR

601

W. Zhang, S. An, S.Z. Gou, K. Gu, P. Li, Y.J. Yuan, M. Yue
IMP/CAS, Lanzhou, People's Republic of China

This article gives a brief description of the timing system for Heavy Ion Research Facility in Lanzhou- Cooler Storage Ring (HIRFL-CSR). It introduces in detail mainly of the timing system architecture, hardware and software. We use standard event system architecture. The system is mainly composed of the events generator (EVG), the events receiver (EVR) and the events fan-out module. The system is the standard three-layer structure. OPI layer realizes generated and monitoring for the events. The intermediate layer is the events transmission and fan out. Device control layer performs the interpretation of the events. We adopt our R&D EVG to generate the events of virtual accelerator. At the same time, we have used our own design events fan-out module and realize distributed on the events. In equipment control layer, we use EVR design based on FPGA to interpret the events of different equipment and achieve an orderly work. The Timing System realize the ion beam injection, acceleration and extraction.

Poster TUPHA082 [0.394 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-TUPHA082

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)