ICALEPCS2017 - List of Authors (Trdlicka, J.)

Paper	Title	Page
THPHA171	Control System Software Development Environment in ELI Beamlines	1831
	P. Bastl Institute of Physics of the ASCR, Prague, Czech Republic O. Janda, A. Kruchenko, P. Pivonka, B. Plötzeneder, S. Saldulkar, J. Trdlicka ELI-BEAMS, Prague, Czech Republic
	The ELI Beamlines facility is a Petawatt laser facility in the final construction and commissioning phase in Prague, Czech Republic. The central control system operates and controls complex subsystems (lasers, beam transport, beamlines, experiments, facility systems, safety systems) with huge ammount of devices and computers. Therefore standards for software development were established: - Model based development - Standard approach to user interfaces - Standard approaches to device interfaces - Third party envirnment interfaces TANGO framework was choosen for communication in distributed control system environment.
	Poster THPHA171 [3.324 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THPHA171
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRAPL05	Hardware Architecture of the ELI Beamlines Control and DAQ System	2000
	P. Bastl Institute of Physics of the ASCR, Prague, Czech Republic V. Gaman, O. Janda, P. Pivonka, B. Plötzeneder, J. Sys, J. Trdlicka ELI-BEAMS, Prague, Czech Republic
	The ELI Beamlines facility is a Petawatt laser facility in the final construction and commissioning phase in Prague, Czech Republic. End 2017, a first experiment will be performed. In the end, four lasers will be used to control beamlines in six experimental halls. The central control system connects and controls more than 40 complex subsystems (lasers, beam transport, beamlines, experiments, facility systems, safety systems), with high demands on network, synchronisation, data acquisition, and data processing. It relies on a network based on more than 15.000 fibres, which is used for standard technology control (PowerLink over fibre and standard Ethernet), timing (WhiteRabbit) and dedicated high-throughput data acquisition. Technology control is implemented on standard industrial platforms (B&R) in combination with uTCA for more demanding applications. The data acquisition system is interconnected via Infiniband, with an option to integrate OmniPath. Most control hardware installations are completed, and many subsystems are already successfully in operation. An overview and status will be given.
	Talk as video stream: https://youtu.be/W2TF37cRWTo
	Slides FRAPL05 [5.051 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-FRAPL05
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Control System Software Development Environment in ELI Beamlines

1831

P. Bastl
Institute of Physics of the ASCR, Prague, Czech Republic
O. Janda, A. Kruchenko, P. Pivonka, B. Plötzeneder, S. Saldulkar, J. Trdlicka
ELI-BEAMS, Prague, Czech Republic

The ELI Beamlines facility is a Petawatt laser facility in the final construction and commissioning phase in Prague, Czech Republic. The central control system operates and controls complex subsystems (lasers, beam transport, beamlines, experiments, facility systems, safety systems) with huge ammount of devices and computers. Therefore standards for software development were established: - Model based development - Standard approach to user interfaces - Standard approaches to device interfaces - Third party envirnment interfaces TANGO framework was choosen for communication in distributed control system environment.

Poster THPHA171 [3.324 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-THPHA171

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRAPL05

Hardware Architecture of the ELI Beamlines Control and DAQ System

2000

P. Bastl
Institute of Physics of the ASCR, Prague, Czech Republic
V. Gaman, O. Janda, P. Pivonka, B. Plötzeneder, J. Sys, J. Trdlicka
ELI-BEAMS, Prague, Czech Republic

The ELI Beamlines facility is a Petawatt laser facility in the final construction and commissioning phase in Prague, Czech Republic. End 2017, a first experiment will be performed. In the end, four lasers will be used to control beamlines in six experimental halls. The central control system connects and controls more than 40 complex subsystems (lasers, beam transport, beamlines, experiments, facility systems, safety systems), with high demands on network, synchronisation, data acquisition, and data processing. It relies on a network based on more than 15.000 fibres, which is used for standard technology control (PowerLink over fibre and standard Ethernet), timing (WhiteRabbit) and dedicated high-throughput data acquisition. Technology control is implemented on standard industrial platforms (B&R) in combination with uTCA for more demanding applications. The data acquisition system is interconnected via Infiniband, with an option to integrate OmniPath. Most control hardware installations are completed, and many subsystems are already successfully in operation. An overview and status will be given.

Talk as video stream: https://youtu.be/W2TF37cRWTo

Slides FRAPL05 [5.051 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2017-FRAPL05

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)