IBIC2014 - List of Authors (Olmos, A.)

Paper	Title	Page
TUPF03	Overview of the Geometrical Non-Linear Effects of Button BPMs and Methodology for Their Efficient Suppression	298
	A.A. Nosych, U. Iriso, A. Olmos ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain M. Wendt CERN, Geneva, Switzerland
	This paper describes an overview of the geometric non-linear effects common to beam position monitors (BPMs) installed in the accelerators and a methodology to correct for these effects. A typical characteristic curve of a pick-up is linear within a limited range from the BPM origin. At larger offsets the non-linearity of the curve is more pronounced and gets worse if the button diameter is small with respect to the beam pipe diameter. The general real-time linearization methods usually utilize linear correction combined with a simplistic polynomial, which may lead to inaccuracies in their limited application. We have developed a more rigorous methodology to suppress the non-linear effects of the BPMs through electromagnetic (EM) simulations and 2D fitting approximations. The focus is mainly on standard button pick-ups for the electron (ALBA) and proton machines (LHC).
Export •	reference for this paper to ※ LaTeX, ※ Text, ※ IS/RefMan, ※ EndNote (xml)

WEPD23	Commissioning of the ALBA Fast Orbit Feedback System	691
	A. Olmos, S. Blanch-Torné, G. Cuní, Z. Martí, J. Moldes, R. Petrocelli, S. Rubio-Manrique, X. Serra-Gallifa, D. Yépez ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
	The ALBA Fast Orbit FeedBack system (FOFB) started its commissioning phase in September 2013, when all the required hardware was installed and the development of different controls for the feedback started. This report shows our experience tuning the different parameters to setup the system, together with vibration and beam noise measurements at different conditions. Finally, the present results and future steps for this system are described.
	Poster WEPD23 [0.902 MB]
Export •	reference for this paper to ※ LaTeX, ※ Text, ※ IS/RefMan, ※ EndNote (xml)

Paper

Title

Page

Overview of the Geometrical Non-Linear Effects of Button BPMs and Methodology for Their Efficient Suppression

298

A.A. Nosych, U. Iriso, A. Olmos
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
M. Wendt
CERN, Geneva, Switzerland

This paper describes an overview of the geometric non-linear effects common to beam position monitors (BPMs) installed in the accelerators and a methodology to correct for these effects. A typical characteristic curve of a pick-up is linear within a limited range from the BPM origin. At larger offsets the non-linearity of the curve is more pronounced and gets worse if the button diameter is small with respect to the beam pipe diameter. The general real-time linearization methods usually utilize linear correction combined with a simplistic polynomial, which may lead to inaccuracies in their limited application. We have developed a more rigorous methodology to suppress the non-linear effects of the BPMs through electromagnetic (EM) simulations and 2D fitting approximations. The focus is mainly on standard button pick-ups for the electron (ALBA) and proton machines (LHC).

Export •

reference for this paper to ※ LaTeX, ※ Text, ※ IS/RefMan, ※ EndNote (xml)

WEPD23

Commissioning of the ALBA Fast Orbit Feedback System

691

A. Olmos, S. Blanch-Torné, G. Cuní, Z. Martí, J. Moldes, R. Petrocelli, S. Rubio-Manrique, X. Serra-Gallifa, D. Yépez
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain

The ALBA Fast Orbit FeedBack system (FOFB) started its commissioning phase in September 2013, when all the required hardware was installed and the development of different controls for the feedback started. This report shows our experience tuning the different parameters to setup the system, together with vibration and beam noise measurements at different conditions. Finally, the present results and future steps for this system are described.

Poster WEPD23 [0.902 MB]

Export •

reference for this paper to ※ LaTeX, ※ Text, ※ IS/RefMan, ※ EndNote (xml)