Author: Hsu, K.T.
Paper Title Page
MOPC39 Commissioning of a New Streak Camera at TLS for TPS Project 159
  • C.Y. Liao, M.C. Chou, K.T. Hsu, K.H. Hu, C.H. Kuo, C.-C. Kuo, W.K. Lau, C.Y. Wu
    NSRRC, Hsinchu, Taiwan
  Taiwan Photon Source (TPS) is a 3 GeV synchrotron light source which is being construction at campus of National Synchrotron Radiation Research Center (NSRRC) in Taiwan. A new streak camera equipped with a 125/250 MHz synchroscan unit, a fast/slow single sweep unit, and a dual-time sweep unit is prepared for beam diagnostics, especially for the TPS. An ultra short femtosecond Ti-Sapphire laser was used to evaluate the sub-picosecond temporal resolution of the streak camera and the first beam measurements of the streak camera using synchrotron light from the existing 1.5 GeV Taiwan Light Source (TLS) were performed. The commissioning results are summarized in this report.  
MOPF26 New Booster Tune Measurement System for TLS and TPS Prototype 271
  • P.C. Chiu, J. Chen, Y.-S. Cheng, K.T. Hsu, S.Y. Hsu, K.H. Hu, C.H. Kuo
    NSRRC, Hsinchu, Taiwan
  Taiwan Light Source (TLS) is a 1.5 GeV synchrotron based light source and its booster synchrotron was delivered in 1992. Initial booster tune measurement which adopted extraction kicker as beam excitation and use digital oscillator to extract tune was obsolete. Recently, the beam excitation device has been modified to provide more effective excitation strength and new BPM electronics is adopted to acquire tune for routine booster tune measurement. It also provides a chance to experience for the TPS project booster prototype with the similar infrastructure. Efforts will be summarized in the report.  
TUPC24 The Design Strategy of Orbit Feedback System in the TPS 423
  • C.H. Kuo, J. Chen, Y.-S. Cheng, P.C. Chiu, K.T. Hsu, K.H. Hu, C.Y. Wu
    NSRRC, Hsinchu, Taiwan
  TPS (Taiwan Photon Source) is a 3 GeV synchrotron light source which is being constructed at NSRRC. The BPM electronic is based on uTCA platform, is used for various request and function reasons. The orbit feedback system design is based on open structure, modularization and highly integration. There are many advantages that orbit feedback system is embedded in the BPM crate with FPGA modules. High throughput backplane, data transfer and processing support rich function for waveform record, diagnostic, beam study and transient analysis. The design and implementation result of the system will be reported in this conference.