HB2012 - List of Authors (Salvant, B.)

Paper

Title

Page

Measurements of the LHC Longitudinal Resistive Impedance with Beam

183

J.F. Esteban Müller, T. Argyropoulos, T. Bohl, T. Mastoridis, N. Mounet, G. Papotti, B. Salvant, E.N. Shaposhnikova, D. Valuch
CERN, Geneva, Switzerland

The resistive part of the longitudinal impedance contributes to the heat deposition on different elements in the LHC ring including the beam screens, where it has to be absorbed by the cryogenic system and can be a practical limitation for the maximum beam intensity. In this paper, we present the first measurements of the LHC longitudinal resistive impedance with beam, done through synchronous phase shift measurements during Machine Development sessions in 2012. Synchronous phase shift is measured for different bunch intensities and lengths using the high-precision LHC Beam Phase Module and then data are post-processed to further increase the accuracy. The dependence of the energy loss per particle on bunch length is then obtained and compared with the expected values found using the LHC impedance model.

TUO1A01

The High Intensity/High Brightness Upgrade Program at CERN: Status and Challenges

226

S.S. Gilardoni, G. Arduini, T. Argyropoulos, S. Aumon, H. Bartosik, E. Benedetto, N. Biancacci, T. Bohl, J. Borburgh, C. Carli, F. Caspers, H. Damerau, J.F. Esteban Müller, V. Forte, R. Garoby, M. Giovannozzi, B. Goddard, S. Hancock, K. Hanke, A. Huschauer, G. Iadarola, M. Meddahi, G. Métral, B. Mikulec, E. Métral, Y. Papaphilippou, S. Persichelli, G. Rumolo, B. Salvant, F. Schmidt, E.N. Shaposhnikova, R. Steerenberg, G. Sterbini, M. Taborelli, H. Timko, M. Vretenar, R. Wasef, C. Yin Vallgren, C. Zannini
CERN, Geneva, Switzerland
G. Franchetti
GSI, Darmstadt, Germany
M. Migliorati
University of Rome "La Sapienza", Rome, Italy
A.Y. Molodozhentsev
J-PARC, KEK & JAEA, Ibaraki-ken, Japan
M.T.F. Pivi
SLAC, Menlo Park, California, USA
V.G. Vaccaro
Naples University Federico II, Mathematical, Physical and Natural Sciences Faculty, Napoli, Italy

The future beam brilliance and intensities required by the HL-LHC (High-Luminosity LHC) project and for possible new neutrino production beams triggered a deep revision of the LHC injector performances. The analysis, progressing in the framework of the LHC Injectors Upgrade (LIU) projects, outlined major limitations mainly related to collective effects - space charge in PSB and PS, electron cloud driven and TMCI instabilities in the SPS, longitudinal coupled bunch instabilities in the PS for example - but also to the existing hardware capability to cope with beam instabilities and losses. A summary of the observations and simulation studies carried out so far, as well as the future ones, will be presented. The solution proposed to overcome the different limitations and the plans for their implementation will be also briefly reviewed.

Slides TUO1A01 [12.748 MB]

WEO1A01

Impedance Studies of 2D Azimuthally Symmetric Devices of Finite Length

344

N. Biancacci, E. Métral, B. Salvant
CERN, Geneva, Switzerland
N. Biancacci
Rome University La Sapienza, Roma, Italy
M. Migliorati, L. Palumbo
URLS, Rome, Italy
V.G. Vaccaro
Naples University Federico II, Mathematical, Physical and Natural Sciences Faculty, Napoli, Italy

In circular accelerators, the beam quality can be strongly affected by the self-induced electromagnetic fields excited by the beam in the passage through the elements of the accelerator. The beam coupling impedance quantifies this interaction and allows predicting the stability of the dynamics of high intensity, high brilliance beams. The coupling impedance can be evaluated with finite element methods or using analytical methods, such as Field Matching or Mode Matching. In this paper we present an application of the Mode Matching technique for an azimuthally uniform structure of finite length: a cylindrical cavity loaded with a toroidal slab of lossy dielectric, connected with cylindrical beam pipes. In order to take into account the finite length of the structure, with respect to the infinite length approximation, we decompose the fields in the cavity into a set of orthonormal modes. We obtain a complete set of equations using the magnetic field matching and the non-uniform convergence of the electric field on the cavity boundaries. We present benchmarks done with CST Particle Studio simulations and existing analytical formulas, pointing out the effect of finite length and non-relativistic beta.

Slides WEO1A01 [6.689 MB]

WEO1A02

LHC Impedance Model: Experience with High Intensity Operation in the LHC

349

B. Salvant, O. Aberle, G. Arduini, R.W. Aßmann, V. Baglin, M.J. Barnes, P. Baudrenghien, A. Bertarelli, C. Bracco, R. Bruce, X. Buffat, F. Carra, F. Caspers, G. Cattenoz, S.D. Claudet, H.A. Day, J.F. Esteban Müller, M. Garlaschè, L. Gentini, B. Goddard, A. Grudiev, B. Henrist, W. Herr, S. Jakobsen, R.J. Jones, G. Lanza, L. Lari, T. Mastoridis, N. Mounet, E. Métral, A.A. Nosych, J.L. Nougaret, S. Persichelli, T. Pieloni, A.M. Piguiet, S. Redaelli, F. Roncarolo, G. Rumolo, B. Salvachua, M. Sapinski, E.N. Shaposhnikova, L.J. Tavian, M.A. Timmins, J.A. Uythoven, A. Vidal, R. Wasef, D. Wollmann
CERN, Geneva, Switzerland
A.V. Burov
Fermilab, Batavia, USA
S.M. White
BNL, Upton, Long Island, New York, USA

The CERN Large Hadron Collider (LHC) is now in luminosity production mode and has been pushing its performance in the past months by increasing the proton beam brightness, the collision energy and the machine availability. As a consequence, collective effects have started to become more and more visible and have effectively slowed down the performance increase of the machine. Among these collective effects, the interaction of brighter LHC bunches with the longitudinal and transverse impedance of the machine has been observed to generate beam induced heating and transverse instabilities since 2010. This contribution reviews the current LHC impedance model obtained from theory, simulations and bench measurements as well as a selection of measured effects with the LHC beam.

Slides WEO1A02 [7.991 MB]

WEO1B01

Low Gamma Transition Optics for the SPS: Simulation and Experimental Results for High Brightness Beams

381

H. Bartosik, G. Arduini, T. Argyropoulos, T. Bohl, K. Cornelis, J.F. Esteban Müller, K.S.B. Li, Y. Papaphilippou, G. Rumolo, B. Salvant, F. Schmidt, E.N. Shaposhnikova, H. Timko
CERN, Geneva, Switzerland
A.Y. Molodozhentsev
KEK, Ibaraki, Japan

The single bunch transverse mode coupling instability (TMCI) at injection is presently one of the main intensity limitation for LHC beams in the SPS. A new optics for the SPS with lower transition energy yields an almost 3-fold increase of the slip factor at injection energy and thus a significantly higher TMCI threshold, as demonstrated both in simulations and in experimental studies. It is observed furthermore that the low gamma transition optics yields better longitudinal stability throughout the entire acceleration cycle. In addition, simulations predict a higher threshold for the electron cloud driven single bunch instability, which might become an important limitation for high intensity LHC beams with the nominal 25 ns bunch spacing. This contribution gives a summary of the experimental and simulation studies, addressing also space charge effects and the achievable brightness with high intensity single bunch beams.

Paper	Title	Page
MOP252	Measurements of the LHC Longitudinal Resistive Impedance with Beam	183
	J.F. Esteban Müller, T. Argyropoulos, T. Bohl, T. Mastoridis, N. Mounet, G. Papotti, B. Salvant, E.N. Shaposhnikova, D. Valuch CERN, Geneva, Switzerland
	The resistive part of the longitudinal impedance contributes to the heat deposition on different elements in the LHC ring including the beam screens, where it has to be absorbed by the cryogenic system and can be a practical limitation for the maximum beam intensity. In this paper, we present the first measurements of the LHC longitudinal resistive impedance with beam, done through synchronous phase shift measurements during Machine Development sessions in 2012. Synchronous phase shift is measured for different bunch intensities and lengths using the high-precision LHC Beam Phase Module and then data are post-processed to further increase the accuracy. The dependence of the energy loss per particle on bunch length is then obtained and compared with the expected values found using the LHC impedance model.

TUO1A01	The High Intensity/High Brightness Upgrade Program at CERN: Status and Challenges	226
	S.S. Gilardoni, G. Arduini, T. Argyropoulos, S. Aumon, H. Bartosik, E. Benedetto, N. Biancacci, T. Bohl, J. Borburgh, C. Carli, F. Caspers, H. Damerau, J.F. Esteban Müller, V. Forte, R. Garoby, M. Giovannozzi, B. Goddard, S. Hancock, K. Hanke, A. Huschauer, G. Iadarola, M. Meddahi, G. Métral, B. Mikulec, E. Métral, Y. Papaphilippou, S. Persichelli, G. Rumolo, B. Salvant, F. Schmidt, E.N. Shaposhnikova, R. Steerenberg, G. Sterbini, M. Taborelli, H. Timko, M. Vretenar, R. Wasef, C. Yin Vallgren, C. Zannini CERN, Geneva, Switzerland G. Franchetti GSI, Darmstadt, Germany M. Migliorati University of Rome "La Sapienza", Rome, Italy A.Y. Molodozhentsev J-PARC, KEK & JAEA, Ibaraki-ken, Japan M.T.F. Pivi SLAC, Menlo Park, California, USA V.G. Vaccaro Naples University Federico II, Mathematical, Physical and Natural Sciences Faculty, Napoli, Italy
	The future beam brilliance and intensities required by the HL-LHC (High-Luminosity LHC) project and for possible new neutrino production beams triggered a deep revision of the LHC injector performances. The analysis, progressing in the framework of the LHC Injectors Upgrade (LIU) projects, outlined major limitations mainly related to collective effects - space charge in PSB and PS, electron cloud driven and TMCI instabilities in the SPS, longitudinal coupled bunch instabilities in the PS for example - but also to the existing hardware capability to cope with beam instabilities and losses. A summary of the observations and simulation studies carried out so far, as well as the future ones, will be presented. The solution proposed to overcome the different limitations and the plans for their implementation will be also briefly reviewed.
	Slides TUO1A01 [12.748 MB]

WEO1A01	Impedance Studies of 2D Azimuthally Symmetric Devices of Finite Length	344
	N. Biancacci, E. Métral, B. Salvant CERN, Geneva, Switzerland N. Biancacci Rome University La Sapienza, Roma, Italy M. Migliorati, L. Palumbo URLS, Rome, Italy V.G. Vaccaro Naples University Federico II, Mathematical, Physical and Natural Sciences Faculty, Napoli, Italy
	In circular accelerators, the beam quality can be strongly affected by the self-induced electromagnetic fields excited by the beam in the passage through the elements of the accelerator. The beam coupling impedance quantifies this interaction and allows predicting the stability of the dynamics of high intensity, high brilliance beams. The coupling impedance can be evaluated with finite element methods or using analytical methods, such as Field Matching or Mode Matching. In this paper we present an application of the Mode Matching technique for an azimuthally uniform structure of finite length: a cylindrical cavity loaded with a toroidal slab of lossy dielectric, connected with cylindrical beam pipes. In order to take into account the finite length of the structure, with respect to the infinite length approximation, we decompose the fields in the cavity into a set of orthonormal modes. We obtain a complete set of equations using the magnetic field matching and the non-uniform convergence of the electric field on the cavity boundaries. We present benchmarks done with CST Particle Studio simulations and existing analytical formulas, pointing out the effect of finite length and non-relativistic beta.
	Slides WEO1A01 [6.689 MB]

WEO1A02	LHC Impedance Model: Experience with High Intensity Operation in the LHC	349
	B. Salvant, O. Aberle, G. Arduini, R.W. Aßmann, V. Baglin, M.J. Barnes, P. Baudrenghien, A. Bertarelli, C. Bracco, R. Bruce, X. Buffat, F. Carra, F. Caspers, G. Cattenoz, S.D. Claudet, H.A. Day, J.F. Esteban Müller, M. Garlaschè, L. Gentini, B. Goddard, A. Grudiev, B. Henrist, W. Herr, S. Jakobsen, R.J. Jones, G. Lanza, L. Lari, T. Mastoridis, N. Mounet, E. Métral, A.A. Nosych, J.L. Nougaret, S. Persichelli, T. Pieloni, A.M. Piguiet, S. Redaelli, F. Roncarolo, G. Rumolo, B. Salvachua, M. Sapinski, E.N. Shaposhnikova, L.J. Tavian, M.A. Timmins, J.A. Uythoven, A. Vidal, R. Wasef, D. Wollmann CERN, Geneva, Switzerland A.V. Burov Fermilab, Batavia, USA S.M. White BNL, Upton, Long Island, New York, USA
	The CERN Large Hadron Collider (LHC) is now in luminosity production mode and has been pushing its performance in the past months by increasing the proton beam brightness, the collision energy and the machine availability. As a consequence, collective effects have started to become more and more visible and have effectively slowed down the performance increase of the machine. Among these collective effects, the interaction of brighter LHC bunches with the longitudinal and transverse impedance of the machine has been observed to generate beam induced heating and transverse instabilities since 2010. This contribution reviews the current LHC impedance model obtained from theory, simulations and bench measurements as well as a selection of measured effects with the LHC beam.
	Slides WEO1A02 [7.991 MB]

WEO1B01	Low Gamma Transition Optics for the SPS: Simulation and Experimental Results for High Brightness Beams	381
	H. Bartosik, G. Arduini, T. Argyropoulos, T. Bohl, K. Cornelis, J.F. Esteban Müller, K.S.B. Li, Y. Papaphilippou, G. Rumolo, B. Salvant, F. Schmidt, E.N. Shaposhnikova, H. Timko CERN, Geneva, Switzerland A.Y. Molodozhentsev KEK, Ibaraki, Japan
	The single bunch transverse mode coupling instability (TMCI) at injection is presently one of the main intensity limitation for LHC beams in the SPS. A new optics for the SPS with lower transition energy yields an almost 3-fold increase of the slip factor at injection energy and thus a significantly higher TMCI threshold, as demonstrated both in simulations and in experimental studies. It is observed furthermore that the low gamma transition optics yields better longitudinal stability throughout the entire acceleration cycle. In addition, simulations predict a higher threshold for the electron cloud driven single bunch instability, which might become an important limitation for high intensity LHC beams with the nominal 25 ns bunch spacing. This contribution gives a summary of the experimental and simulation studies, addressing also space charge effects and the achievable brightness with high intensity single bunch beams.