Author: Inagaki, T.
Paper Title Page
TUA03 Multi-beamline Operation Test at SACLA 293
  • T. Hara, T. Inagaki, R. Kinjo, C. Kondo, Y. Otake, H. Takebe, H. Tanaka, K. Togawa
    RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
  • K. Fukami
    JASRI/SPring-8, Hyogo-ken, Japan
  A new undulator beamline (BL2) was installed in September 2014 at SACLA. Following the installation of this second beamline, a DC switching magnet was replaced by a kicker magnet and a DC septum magnet for bunch-to-bunch multi-beamline operation. The commissioning of the new beamline and bunch-to-bunch operation was started early this year. Since SACLA has been operated with much higher peak currents around 10 kA compared to its original design value of 3 kA, the CSR effect in the beam transport line to BL2, where the electron beam is deflected twice by 3 degree, turns out to be non-negligible. BL2 is currently operated with reduced peak currents and the photon pulse energies of 100-150 μJ are obtained with increased undulator K-values around 2.6-2.85. Although the photon pulse energies of BL2 are still smaller than those of the existing beamline (BL3), the expected stability of the electron beam orbit after the bunch-to-bunch BL switching was achieved and simultaneous lasing at the two beamlines was demonstrated with 8 GeV electron beams. We will report the status and operational issues related to the multi-beamline operation at SACLA.  
slides icon Slides TUA03 [7.095 MB]  
Export • reference for this paper to ※ LaTeX, ※ Text, ※ IS/RefMan, ※ EndNote (xml)