Keyword: kicker
Paper Title Other Keywords Page
MOPSO17 The Present Status of the Theory of the FEL-based Hadron Beam Cooling FEL, electron, hadron, ion 52
 
  • A. Elizarov, V. Litvinenko
    BNL, Upton, Long Island, New York, USA
 
  Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The coherent electron cooling (CeC)* device is one of the new facilities under construction in BNL. The CeC is a realization of the stochastic cooling with an electron beam serving as a pick-up and kicker. Hadrons generate electron density perturbations in the modulator section, then these perturbations are amplified in an FEL, and then, they accelerate (or decelerate) hadrons in the kicker by electric field with respect to their velocities. Here we present the theoretical description of the modulator sector**,***, where the electron density perturbations are formed and our new results on the time evolution of these perturbations in the FEL section, where they are amplified.
* V. N. Litvinenko, Y. S. Derbenev, Phys. Rev. Lett. 102, 114801 (2009).
** A. Elizarov, V. Litvinenko, G. Wang, IPAC'12, weppr099 (2012).
*** A. Elizarov, V. Litvinenko, IPAC'13, mopwo088 (2013).
 
 
TUPSO32 Project of the Short Pulse Facility at KAERI electron, quadrupole, gun, bunching 287
 
  • N. Vinokurov, S.V. Miginsky
    BINP SB RAS, Novosibirsk, Russia
  • S. Bae, B.A. Gudkov, B. Han, K.H. Jang, Y.U. Jeong, H.W. Kim, K. Lee, S.V. Miginsky, J. Mun, S. H. Park, G.I. Shim, N. Vinokurov
    KAERI, Daejon, Republic of Korea
  • N. Vinokurov
    NSU, Novosibirsk, Russia
 
  Funding: This work is supported by the WCI Program of the National Research Foundation of Korea funded by the Ministry of Education, Science, and Technology of Korea (NRF Grant No. WCI 2011-001).
The low-energy electron accelerator with subpicosecond electron bunches is under construction at Korea Atomic Energy Research Institute (KAERI). It will serve as the user facility for high-energy ultrafast electron difraction and synchronized high-power terahertz pulse and short x-ray pulse generation. The accelerator consists of RF gun with photocathode and 20-MeV linac. The bunching of accelerated beam is achieved in the ninety-degree achromatic bend. After that fast kicker deflects some of bunches to the target for x-ray generation, other bunches come to terahertz radiator (undulator or multifoil). Bunches from the RF gun are also planned to use for ultrafast electron difraction. Some detailes of the design, current status of the project and future plans are described.
 
 
TUPSO78 Design of a Collimation System for the Next Generation Light Source at LBNL collimation, gun, linac, undulator 410
 
  • C. Steier, P. Emma, H. Nishimura, C. F. Papadopoulos, H.J. Qian, F. Sannibale, C. Sun
    LBNL, Berkeley, California, USA
 
  Funding: This work is supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
The planned Next Generation Light Source at LBNL is designed to deliver MHz repetition rate electron beams to an array of free electron lasers. Because of the high beam power approaching one MW in such a facility, effective beam collimation is extremely important to minimize radiation damage, prevent quenches of superconducting cavities, limit dose rates outside of the accelerator tunnel and prevent equipment damage. We describe the conceptual design of a collimation system, including detailed simulations to verify its effectiveness.