Author: Honkavaara, K.
Paper Title Page
TUPA04 sFLASH - Present Status and Commisioning Results 194
 
  • V. Miltchev, S. Ackermann, A. Azima, J. Bödewadt, F. Curbis, M. Drescher, E. Hass, Th. Maltezopoulos, M. Mittenzwey, J. Rönsch-Schulenburg, J. Roßbach, R. Tarkeshian
    Uni HH, Hamburg, Germany
  • H. Delsim-Hashemi, K. Honkavaara, T. Laarmann, H. Schlarb, S. Schreiber, M. Tischer
    DESY, Hamburg, Germany
  • R. Ischebeck
    Paul Scherrer Institut, Villigen, Switzerland
 
  The free-electron laser in Hamburg (FLASH) was previously being operated in the self-amplified spontaneous emission (SASE) mode, producing photons in the XUV wavelength range. Due to the start-up from noise the SASE-radiation consists of a number of uncorrelated modes, which results in a reduced coherence. One option to simultaneously improve both the coherence and the synchronisation between the FEL-pulse and an external laser is to operate FLASH as an amplifier of a seed produced using high harmonics generation (HHG). An experimental set-up - sFLASH, has been installed to test this concept for the wavelengths below 40 nm. The sFLASH installation took place during the planed FLASH shutdown in the winter of 2009/2010. The technical commissioning, which began in the spring of 2010, has been followed by FEL-characterization and seeded-FEL commissioning in 2011. In this contribution the present status and the sFLASH commissioning results will be discussed.  
 
TUPB04 Status of the FEL User Facility FLASH 267
 
  • S. Schreiber, B. Faatz, J. Feldhaus, K. Honkavaara, R. Treusch, M. Vogt
    DESY, Hamburg, Germany
 
  The free-electron laser FLASH at DESY, Germany has been upgraded in 2010 and extended its wavelength range down to 4.1 nm. Beside the increased electron beam energy to 1.25 GeV, an other important upgrade is the installation of 3.9 GHz superconducting RF cavities in the injector. They are used to shape the longitudinal electron beam phase space. Now, significantly more FEL radiation energy per pulse of up to several hundreds of microjoules are achieved. Moreover, the system allows to adjust the FEL pulse length, from long pulses of more than 200 fs to short pulses well below 50 fs. The upgraded FLASH facility shows an excellent performance in terms of FEL radiation quality and stability as well as in reliability of operation. The 3rd user period started as scheduled in September 2010.  
 
TUPA22 FLASH II: A Project Update 247
 
  • B. Faatz, V. Ayvazyan, N. Baboi, V. Balandin, W. Decking, S. Düsterer, H.-J. Eckoldt, M. Felber, J. Feldhaus, N. Golubeva, K. Honkavaara, M. Körfer, T. Laarmann, A. Leuschner, L. Lilje, T. Limberg, D. Nölle, F. Obier, A. Petrov, E. Plönjes, K. Rehlich, H. Schlarb, B. Schmidt, M. Schmitz, S. Schreiber, H. Schulte-Schrepping, J. Spengler, M. Staack, K.I. Tiedtke, M. Tischer, R. Treusch, M. Vogt, H.C. Weddig
    DESY, Hamburg, Germany
  • J. Bahrdt, R. Follath, K. Holldack, A. Meseck, R. Mitzner
    HZB, Berlin, Germany
  • J. Chen, H.X. Deng, B. Liu
    SINAP, Shanghai, People's Republic of China
  • M. Drescher, A. Hage, V. Miltchev, R. Riedel, J. Rönsch-Schulenburg, J. Roßbach, M. Schulz, A. Willner
    Uni HH, Hamburg, Germany
  • M. Gensch
    HZDR, Dresden, Germany
  • F. Tavella
    HIJ, Jena, Germany
 
  FLASH II is an extension of the existing FLASH facility by an undulator line and an experimental Hall of which the construction will start before the end of the year. Aims are to increase beamtime for users and implement HHG seeding for the longer wavelength range from 10 to 40 nm at a reduced repetition rate of 100 kHz. Additional seeding schemes are under discussion as a future option. We will present a progress report of FLASH II.