Paper | Title | Page |
---|---|---|
TPPT051 | High Power Coupler for the TESLA Superstructure Cavities | 3141 |
|
||
Funding: U.S. Department of Energy Grant No. DE-FG02-00ER86102. More and more accelerators are built with superconducting cavities operating at cryogenic temperatures, and the probability of a ceramic window failure presents increasing problems because of the resulting contamination of the cavities surfaces and the resulting accelerating electric field degradation. A cost effective design and fabrication method for the TESLA cavities has been developed in the framework of a DOE STTR grant. This new design replaces the present TESLA cylindrical ceramic windows with two planar disc windows separated by a vacuum space and is optimized for RF input power, vacuum characteristics, and thermal properties. This novel coupler will reduce the costs of fabrication and improve the RF performance of the coupler, the vacuum between the two windows, and the cleaning procedure. Two couplers with this design have been fabricated and are presently being conditioned for testing at DESY, Germany, and LAL, France, on the RF high power testing stand and on a test cryomodule. |
||
TPPT075 | Influence of Ta Content in High Purity Niobium on Cavity Performance | 3955 |
|
||
Funding: Work supported by the U.S. DOE Contract No DE-AC05-84ER40150. In a previous paper* we have reported about initial tests of single cell 1500 MHz cavities made from high purity niobium with three different Ta contents of 160 ppm, ~600 ppm and ~1400 ppm. These cavities had been treated by buffered chemical polishing several times and 100 mm, 200 mm and 300 mm of material had been removed from the surfaces. This contribution reports about subsequent tests following post purification heat treatments with Ti and in situ baking. As a result, all cavities exhibited increased quench fields due to the improved thermal conductivity after the heat treatment. After the "in situ" baking at 120C for ~40 hrs the always present Q-drop at high fields disappeared and further improvements in accelerating gradient could be realized. Gradients as high as Eacc = 35 MV/m were achieved and there were no clear indications that the cavity performance was influenced by the Ta content in the material. A multi-cell cavity from the high Ta content material is being fabricated and results will be presented at this conference. *P. Kneisel et al., Linac 2004. |
||
RPPE001 | The CARE Accelerator R&D Programme in Europe | 749 |
|
||
Funding: This work is supported by the European Community-Research Infrastructure Activity under the FP6 Structuring the European Research Area programme (CARE, contract number RII3-CT-2003-506395). CARE, an ambitious and coordinated programme of accelerator research and developments oriented towards HEP projects, has been launched in January 2004 by the main European laboratories and the European Commission within the 6th Framework Programme. This programme aims at improving existing infrastructures dedicated to future projects such as linear colliders, upgrades of hadron colliders and high intensity proton drivers. An important part of this programme is devoted to advancing the performance of the superconducting technology, both in the fields of RF cavities for electron and proton acceleration and of high field magnets, as well as to developing high intensity electron and proton injectors. We describe the R&D plans of the four main R&D activities and report on the results and progress obtained so far. |