IPAC2017 - List of Authors (White, G.R.)

Paper	Title	Page
MOPIK115	A Design for 10 GeV, High Peak-Current, Tightly Focused Electron Beams at FACET-II	807
	G.R. White SLAC, Menlo Park, California, USA
	Funding: This work was sponsored by the Department of Energy under Contract Number: DE-AC02-76SF00515 FACET-II will be a new test facility, starting construction in 2018 within the main SLAC Linac. Its purpose is to build on the decades-long experience developed conducting accelerator R&D at SLAC in the areas of advanced acceleration and coherent radiation techniques with high-energy electron and positron beams. The design consists of a 135-MeV high-brightness photo-injector constructed in an off-axis injection line in Sector 10 of the SLAC Linac, two new 4-bend chicane bunch compressors installed in Sectors 11 and 14, with a third compression stage provided by the existing FACET W Chicane in Sector 20. We develop a design to deliver peak currents more than 160 kA to the Sector 20 interaction region at 10 GeV, with 10 'm-rad emittances at 2 nC bunch charge and 1.4 % rms energy spread. The Sector 20 bunch compressor is re-designed for maximum peak current throughput and minimal emittance degradation via CSR, and the FACET-II compression scheme is optimized. We present 6D start-end beam tracking simulations using Lucretia including ISR, CSR, wakefields and space charge effects.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPIK115
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK075	ATF2 Beam Halo Collimation System Background and Wakefield Measurements in the 2016 Runs	1864
	N. Fuster-Martínez, A. Faus-Golfe IFIC, Valencia, Spain P. Bambade, A. Faus-Golfe, S. Wallon, R.J. Yang LAL, Orsay, France K. Kubo, T. Okugi, T. Tauchi, N. Terunuma Sokendai, Ibaraki, Japan S. Kuroda KEK, Ibaraki, Japan I. Podadera, F. Toral CIEMAT, Madrid, Spain G.R. White SLAC, Menlo Park, California, USA
	A single vertical beam halo collimation system has been installed in ATF2 in March 2016 to reduce the background in the IP and Post-IP region. In this paper, we present the results of an experimental program carried out during 2016 in order to demonstrate the efficiency of the vertical collimation system and measure the wakefields induced by such a system. Furthermore, a comparison of the measurements of the collimation system wakefield impact with CST PS numerical simulations and analytical calculations is also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK075
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOBA3	A Compact 335 MeV Positron Damping Ring Design for FACET-II	3652
	G.R. White, Y. Cai, R.O. Hettel, M.A.G. Johansson, V. Yakimenko, G. Yocky SLAC, Menlo Park, California, USA
	Funding: This work was supported by the Department of Energy under Contract Number: DE-AC02-76SF00515. FACET-II will be a new test facility, starting construction in 2018 within the main SLAC Linac. Its purpose is to build on the decades-long experience developed conducting accelerator R&D at SLAC in the areas of advanced acceleration and coherent radiation techniques with high-energy electron and positron beams. The positron system design utilizes an existing W-Re target in Linac Sector 19, driven by 4 nC electrons bunches at 10 GeV. We present the design of a 335 MeV, 21.4 m circumference damping ring required to damp emittance from a modified positron return beamline by a factor of 500. The transverse emittance is calculated to be 6 um-rad, fully coupled, with a bunch length of 4 mm and energy spread 0.06 %, at a bunch charge of 1 nC. The arc magnets need to be especially compact due to tight space constraints (installation will be in the existing SLAC Linac tunnel, Sector 10, with 3 m width available) and were a key design challenge. We present a solution with combined function bend/quadrupole/sextupole magnets which have been modelled in 3D using Opera.
	Slides THOBA3 [8.372 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THOBA3
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A Design for 10 GeV, High Peak-Current, Tightly Focused Electron Beams at FACET-II

807

G.R. White
SLAC, Menlo Park, California, USA

Funding: This work was sponsored by the Department of Energy under Contract Number: DE-AC02-76SF00515
FACET-II will be a new test facility, starting construction in 2018 within the main SLAC Linac. Its purpose is to build on the decades-long experience developed conducting accelerator R&D at SLAC in the areas of advanced acceleration and coherent radiation techniques with high-energy electron and positron beams. The design consists of a 135-MeV high-brightness photo-injector constructed in an off-axis injection line in Sector 10 of the SLAC Linac, two new 4-bend chicane bunch compressors installed in Sectors 11 and 14, with a third compression stage provided by the existing FACET W Chicane in Sector 20. We develop a design to deliver peak currents more than 160 kA to the Sector 20 interaction region at 10 GeV, with 10 'm-rad emittances at 2 nC bunch charge and 1.4 % rms energy spread. The Sector 20 bunch compressor is re-designed for maximum peak current throughput and minimal emittance degradation via CSR, and the FACET-II compression scheme is optimized. We present 6D start-end beam tracking simulations using Lucretia including ISR, CSR, wakefields and space charge effects.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOPIK115

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK075

ATF2 Beam Halo Collimation System Background and Wakefield Measurements in the 2016 Runs

1864

N. Fuster-Martínez, A. Faus-Golfe
IFIC, Valencia, Spain
P. Bambade, A. Faus-Golfe, S. Wallon, R.J. Yang
LAL, Orsay, France
K. Kubo, T. Okugi, T. Tauchi, N. Terunuma
Sokendai, Ibaraki, Japan
S. Kuroda
KEK, Ibaraki, Japan
I. Podadera, F. Toral
CIEMAT, Madrid, Spain
G.R. White
SLAC, Menlo Park, California, USA

A single vertical beam halo collimation system has been installed in ATF2 in March 2016 to reduce the background in the IP and Post-IP region. In this paper, we present the results of an experimental program carried out during 2016 in order to demonstrate the efficiency of the vertical collimation system and measure the wakefields induced by such a system. Furthermore, a comparison of the measurements of the collimation system wakefield impact with CST PS numerical simulations and analytical calculations is also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK075

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THOBA3

A Compact 335 MeV Positron Damping Ring Design for FACET-II

3652

G.R. White, Y. Cai, R.O. Hettel, M.A.G. Johansson, V. Yakimenko, G. Yocky
SLAC, Menlo Park, California, USA

Funding: This work was supported by the Department of Energy under Contract Number: DE-AC02-76SF00515.
FACET-II will be a new test facility, starting construction in 2018 within the main SLAC Linac. Its purpose is to build on the decades-long experience developed conducting accelerator R&D at SLAC in the areas of advanced acceleration and coherent radiation techniques with high-energy electron and positron beams. The positron system design utilizes an existing W-Re target in Linac Sector 19, driven by 4 nC electrons bunches at 10 GeV. We present the design of a 335 MeV, 21.4 m circumference damping ring required to damp emittance from a modified positron return beamline by a factor of 500. The transverse emittance is calculated to be 6 um-rad, fully coupled, with a bunch length of 4 mm and energy spread 0.06 %, at a bunch charge of 1 nC. The arc magnets need to be especially compact due to tight space constraints (installation will be in the existing SLAC Linac tunnel, Sector 10, with 3 m width available) and were a key design challenge. We present a solution with combined function bend/quadrupole/sextupole magnets which have been modelled in 3D using Opera.

Slides THOBA3 [8.372 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-THOBA3

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)