IPAC2017 - List of Authors (Pasquino, C.)

Paper	Title	Page
MOOCA3	Amorphous Carbon Thin Film Coating of the SPS Beamline: Evaluation of the First Coating Implementation	44
	M. Van Gompel, P. Chiggiato, P. Costa Pinto, P. Cruikshank, C. Pasquino, J. Perez Espinos, A. Sapountzis, M. Taborelli, W. Vollenberg CERN, Geneva, Switzerland
	As part of the LHC Injector Upgrade (LIU) project, the Super Proton Synchrotron (SPS) must be upgraded in order to inject in the LHC 25 ns bunch spaced beams of higher intensity. To mitigate the Electron Multipacting (EM) phenomenon in the SPS, CERN developed thin film carbon coatings with a low Secondary Electron Yield (SEY). The development went from coating small samples, up to coating of 6 m long vacuum chambers directly installed in the magnets. To deposit the low SEY amorphous carbon (aC) film on the vacuum chamber inner wall of SPS ring components, a modular hollow cathode train was designed. The minimization of the logistical impact requires a strategy combining in-situ and ex-situ coating, depending on the type of components. To validate the implementation strategy of the aC thin films and the in-situ coating process along the 7 km long SPS beamline, approximately 2 cells of B-type bending dipoles and 9 focussing quadrupoles are foreseen to be treated with the aC coating during the Extended Year End Technical Stop (EYETS) 2016-2017. We will discuss the coating technique and evaluate both the implementation process and the resulting coating performance.
	Slides MOOCA3 [71.421 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOOCA3
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK032	AWAKE Proton Beam Commissioning	1747
	J.S. Schmidt, D. Barrientos, M. Barros Marin, B. Biskup, A. Boccardi, T.B. Bogey, T. Bohl, C. Bracco, S. Cettour Cave, H. Damerau, V. Fedosseev, F. Friebel, S.J. Gessner, A. Goldblatt, E. Gschwendtner, L.K. Jensen, V. Kain, T. Lefèvre, S. Mazzoni, J.C. Molendijk, A. Pardons, C. Pasquino, S.F. Rey, H. Vincke, U. Wehrle CERN, Geneva, Switzerland J.T. Moody MPI-P, München, Germany K. Rieger MPI, Muenchen, Germany
	AWAKE will be the first proton driven plasma wakefield acceleration experiment worldwide. The facility is located in the former CNGS area at CERN and will include a proton, laser and electron beam line merging in a 10 m long plasma cell, which is followed by the experimental diagnostics. In the first phase of the AWAKE physics program, which started at the end of 2016, the effect of the plasma on a high energy proton beam will be studied. A proton bunch is expected to experience the so called self-modulation instability, which leads to the creation of micro-bunches within the long proton bunch. The plasma channel is created in a rubidium vapor via field ionization by a TW laser pulse. This laser beam has to overlap with the proton beam over the full length of the plasma cell, resulting in tight requirements for the stability of the proton beam at the plasma cell in the order of ~ 0.1 mm. In this paper the beam commissioning results of the ~810 m long transfer line for proton bunches with 3·10¹¹ protons/bunch and a momentum of 400 GeV/c will be presented with a focus on the challenges of the parallel operation of the laser and proton beam.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK032
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA110	Analysis and Operational Feedback on the New Design of the High Energy Beam Dump in the CERN SPS	3524
	P. Rios Rodriguez, J.A. Briz Monago, M. Calviani, K. Cornelis, S. De Man, R. Esposito, S.S. Gilardoni, B. Goddard, J.L. Grenard, D. Grenier, M. Grieco, J. Humbert, V. Kain, F.M. Leaux, C. Pasquino, A. Perillo-Marcone, J.R.F. Poujol, S. Sgobba, D. Steyart, F.M. Velotti, V. Vlachoudis CERN, Geneva, Switzerland
	CERN's Super Proton Synchrotron (SPS) high-energy internal dump (Target Internal Dump Vertical Graphite, known as TIDVG) is required to intercept beams from 10² to 450 GeV. The equipment installed in 2014 (TIDVG#3) featured an absorbing core composed of different materials surrounded by a water-cooled copper jacket, which hold the UHV of the machine. An inspection of a previous equipment (TIDVG#2) in 2013 revealed significant beam induced damage to the aluminium section of the dump, which required imposing operational limitations to minimise the risk of reproducing this phenomenon. Additionally, in 2016 a vacuum leak was detected in the dump assembly, which imposed further limitations, i.e. a reduction of the beam intensity that could be dumped per SPS supercycle. This paper presents a new design (TIDVG#4), which focuses on improving the operational robustness of the device. Moreover, thanks to the added instrumentation, a careful analysis of its performance (both experimentally and during operation) will be possible. These studies will help validating technical solutions for the design of the future SPS dump to be installed during CERN's Long Shutdown 2 in 2020 (TIDVG#5).
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA110
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Amorphous Carbon Thin Film Coating of the SPS Beamline: Evaluation of the First Coating Implementation

44

M. Van Gompel, P. Chiggiato, P. Costa Pinto, P. Cruikshank, C. Pasquino, J. Perez Espinos, A. Sapountzis, M. Taborelli, W. Vollenberg
CERN, Geneva, Switzerland

As part of the LHC Injector Upgrade (LIU) project, the Super Proton Synchrotron (SPS) must be upgraded in order to inject in the LHC 25 ns bunch spaced beams of higher intensity. To mitigate the Electron Multipacting (EM) phenomenon in the SPS, CERN developed thin film carbon coatings with a low Secondary Electron Yield (SEY). The development went from coating small samples, up to coating of 6 m long vacuum chambers directly installed in the magnets. To deposit the low SEY amorphous carbon (aC) film on the vacuum chamber inner wall of SPS ring components, a modular hollow cathode train was designed. The minimization of the logistical impact requires a strategy combining in-situ and ex-situ coating, depending on the type of components. To validate the implementation strategy of the aC thin films and the in-situ coating process along the 7 km long SPS beamline, approximately 2 cells of B-type bending dipoles and 9 focussing quadrupoles are foreseen to be treated with the aC coating during the Extended Year End Technical Stop (EYETS) 2016-2017. We will discuss the coating technique and evaluate both the implementation process and the resulting coating performance.

Slides MOOCA3 [71.421 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-MOOCA3

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPIK032

AWAKE Proton Beam Commissioning

1747

J.S. Schmidt, D. Barrientos, M. Barros Marin, B. Biskup, A. Boccardi, T.B. Bogey, T. Bohl, C. Bracco, S. Cettour Cave, H. Damerau, V. Fedosseev, F. Friebel, S.J. Gessner, A. Goldblatt, E. Gschwendtner, L.K. Jensen, V. Kain, T. Lefèvre, S. Mazzoni, J.C. Molendijk, A. Pardons, C. Pasquino, S.F. Rey, H. Vincke, U. Wehrle
CERN, Geneva, Switzerland
J.T. Moody
MPI-P, München, Germany
K. Rieger
MPI, Muenchen, Germany

AWAKE will be the first proton driven plasma wakefield acceleration experiment worldwide. The facility is located in the former CNGS area at CERN and will include a proton, laser and electron beam line merging in a 10 m long plasma cell, which is followed by the experimental diagnostics. In the first phase of the AWAKE physics program, which started at the end of 2016, the effect of the plasma on a high energy proton beam will be studied. A proton bunch is expected to experience the so called self-modulation instability, which leads to the creation of micro-bunches within the long proton bunch. The plasma channel is created in a rubidium vapor via field ionization by a TW laser pulse. This laser beam has to overlap with the proton beam over the full length of the plasma cell, resulting in tight requirements for the stability of the proton beam at the plasma cell in the order of ~ 0.1 mm. In this paper the beam commissioning results of the ~810 m long transfer line for proton bunches with 3·10¹¹ protons/bunch and a momentum of 400 GeV/c will be presented with a focus on the challenges of the parallel operation of the laser and proton beam.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-TUPIK032

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPVA110

Analysis and Operational Feedback on the New Design of the High Energy Beam Dump in the CERN SPS

3524

P. Rios Rodriguez, J.A. Briz Monago, M. Calviani, K. Cornelis, S. De Man, R. Esposito, S.S. Gilardoni, B. Goddard, J.L. Grenard, D. Grenier, M. Grieco, J. Humbert, V. Kain, F.M. Leaux, C. Pasquino, A. Perillo-Marcone, J.R.F. Poujol, S. Sgobba, D. Steyart, F.M. Velotti, V. Vlachoudis
CERN, Geneva, Switzerland

CERN's Super Proton Synchrotron (SPS) high-energy internal dump (Target Internal Dump Vertical Graphite, known as TIDVG) is required to intercept beams from 10² to 450 GeV. The equipment installed in 2014 (TIDVG#3) featured an absorbing core composed of different materials surrounded by a water-cooled copper jacket, which hold the UHV of the machine. An inspection of a previous equipment (TIDVG#2) in 2013 revealed significant beam induced damage to the aluminium section of the dump, which required imposing operational limitations to minimise the risk of reproducing this phenomenon. Additionally, in 2016 a vacuum leak was detected in the dump assembly, which imposed further limitations, i.e. a reduction of the beam intensity that could be dumped per SPS supercycle. This paper presents a new design (TIDVG#4), which focuses on improving the operational robustness of the device. Moreover, thanks to the added instrumentation, a careful analysis of its performance (both experimentally and during operation) will be possible. These studies will help validating technical solutions for the design of the future SPS dump to be installed during CERN's Long Shutdown 2 in 2020 (TIDVG#5).

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2017-WEPVA110

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)