FEL2014 - List of Authors (Vicario, C.)

Paper

Title

Page

The Laser Heater System of SwissFEL

871

M. Pedrozzi, M. Calvi, R. Ischebeck, S. Reiche, C. Vicario
PSI, Villigen PSI, Switzerland
B.D. Fell, N. Thompson
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom

Short wavelength FELs are generally driven by high-brilliance photo-cathode RF-guns which generate electron beams with an uncorrelated energy spread on the order of 1 keV or less. These extremely cold beams can easily develop micro-bunching instabilities caused by longitudinal space charge forces after the compression process. This can result in a blow up of the energy spread and emittance beyond the tolerable level for SASE emission. It has been demonstrated theoretically and experimentally [1] that a controlled increase of the uncorrelated energy spread to typically a few keV is sufficient to strongly reduce the instability growth. In the laser heater system, one achieves a controlled increase of the beam energy spread by a resonant interaction of the electron beam with a transversally polarized laser beam inside of an undulator magnet. The momentum modulation resulting from the energy exchange within the undulator is consequently smeared out in the transmission line downstream of the laser heater system. In SwissFEL, the laser heater system is located after the first two S-band accelerating structures at a beam energy of 150 MeV. This paper describes the layout and the sub-components of this system.
[1] Z. Huang, et al, Phys. Rev. Special Topics – Accelerator and beams 13, 020703 (2010)

THC02

Thermal Emittance Measurements at the SwissFEL Injector Test Facility

970

E. Prat, S. Bettoni, H.-H. Braun, M.C. Divall, R. Ganter, C.P. Hauri, T. Schietinger, A. Trisorio, C. Vicario
PSI, Villigen PSI, Switzerland
C.P. Hauri
EPFL, Lausanne, Switzerland

In a laser-driven RF-gun the ultimate limit of the beam emittance is the transverse momentum of the electrons as they exit the cathode, the so-called intrinsic or thermal emittance. In this contribution we present measurements of the thermal emittance at the SwissFEL Injector Test Facility for electron beam charges down to a few tens of fC. We have studied the thermal emittance and QE dependence on the laser wavelength, the RF-gun gradient and the cathode material (Cu and Cs2Te).

Slides THC02 [1.063 MB]

Paper	Title	Page
THP059	The Laser Heater System of SwissFEL	871
	M. Pedrozzi, M. Calvi, R. Ischebeck, S. Reiche, C. Vicario PSI, Villigen PSI, Switzerland B.D. Fell, N. Thompson STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
	Short wavelength FELs are generally driven by high-brilliance photo-cathode RF-guns which generate electron beams with an uncorrelated energy spread on the order of 1 keV or less. These extremely cold beams can easily develop micro-bunching instabilities caused by longitudinal space charge forces after the compression process. This can result in a blow up of the energy spread and emittance beyond the tolerable level for SASE emission. It has been demonstrated theoretically and experimentally [1] that a controlled increase of the uncorrelated energy spread to typically a few keV is sufficient to strongly reduce the instability growth. In the laser heater system, one achieves a controlled increase of the beam energy spread by a resonant interaction of the electron beam with a transversally polarized laser beam inside of an undulator magnet. The momentum modulation resulting from the energy exchange within the undulator is consequently smeared out in the transmission line downstream of the laser heater system. In SwissFEL, the laser heater system is located after the first two S-band accelerating structures at a beam energy of 150 MeV. This paper describes the layout and the sub-components of this system. [1] Z. Huang, et al, Phys. Rev. Special Topics – Accelerator and beams 13, 020703 (2010)

THC02	Thermal Emittance Measurements at the SwissFEL Injector Test Facility	970
	E. Prat, S. Bettoni, H.-H. Braun, M.C. Divall, R. Ganter, C.P. Hauri, T. Schietinger, A. Trisorio, C. Vicario PSI, Villigen PSI, Switzerland C.P. Hauri EPFL, Lausanne, Switzerland
	In a laser-driven RF-gun the ultimate limit of the beam emittance is the transverse momentum of the electrons as they exit the cathode, the so-called intrinsic or thermal emittance. In this contribution we present measurements of the thermal emittance at the SwissFEL Injector Test Facility for electron beam charges down to a few tens of fC. We have studied the thermal emittance and QE dependence on the laser wavelength, the RF-gun gradient and the cathode material (Cu and Cs2Te).
	Slides THC02 [1.063 MB]