TUZBA —  Tuesday Parallel Session 5   (03-Sep-19   14:00—16:00)
Chair: M. Bai, GSI, Darmstadt, Germany
Paper Title Page
TUZBA1 Commissioning of the Electron Accelerator LEReC for Bunched Beam Cooling 330
 
  • D. Kayran, Z. Altinbas, D. Bruno, M.R. Costanzo, K.A. Drees, A.V. Fedotov, W. Fischer, M. Gaowei, D.M. Gassner, X. Gu, R.L. Hulsart, P. Inacker, J.P. Jamilkowski, Y.C. Jing, J. Kewisch, C.J. Liaw, C. Liu, J. Ma, K. Mernick, T.A. Miller, M.G. Minty, L.K. Nguyen, M.C. Paniccia, I. Pinayev, V. Ptitsyn, V. Schoefer, S. Seletskiy, F. Severino, T.C. Shrey, L. Smart, K.S. Smith, A. Sukhanov, P. Thieberger, J.E. Tuozzolo, E. Wang, G. Wang, W. Xu, A. Zaltsman, H. Zhao, Z. Zhao
    BNL, Upton, New York, USA
  
  Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The brand-new state of the art electron accelerator, LEReC, was built and commissioned at BNL. LEReC accelerator includes a photocathode DC gun, a laser system, a photocathode delivery system, magnets, beam diagnostics, a SRF booster cavity, and a set of Normal Conducting RF cavities to provide sufficient flexibility to tune the beam in the longitudinal phase space. Electron beam quality suitable for cooling in the Relativistic Heavy Ion Collider (RHIC) was achieved [1], which lead to the first demonstration of bunched beam electron cooling of hadron beams [2]. This presentation will discuss commissioning results, achieved beam parameters and performance of the LEReC systems.
[1] D.Kayran et al., First results from Commissioning of LEReC, in Proc of IPAC2019
[2] A.Fedotov et al., First electron cooling of hadron beams using a bunched electron beam, presented at NAPAC2019 		 
slides icon Slides TUZBA1 [18.343 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUZBA1  
About • paper received ※ 27 August 2019       paper accepted ※ 31 August 2019       issue date ※ 08 October 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUZBA2 Electron Ion Collider Machine Detector Interface 335
 
  • B. Parker, E.C. Aschenauer, A. Kiselev, C. Montag, R.B. Palmer, V. Ptitsyn, F.J. Willeke, H. Witte
    BNL, Upton, New York, USA
  • M. Diefenthaler, Y. Furletova, T.J. Michalski, V.S. Morozov, D. Romanov, A. Seryi, R. Yoshida
    JLab, Newport News, Virginia, USA
  • C. Hyde
    ODU, Norfolk, Virginia, USA
  • M.K. Sullivan
    SLAC, Menlo Park, California, USA
  
  This presentation summarizes the physics requirements as they translate into accelerator requirements at the machine-detector interface. Unique aspects of the Interaction Region and detector acceptance – unique to an Electron Ion Collider – are summarized. Designs of both site-specific concepts are outlined.  
slides icon Slides TUZBA2 [13.525 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUZBA2  
About • paper received ※ 29 August 2019       paper accepted ※ 05 September 2019       issue date ※ 08 October 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUZBA3 A High-Energy Design for JLEIC Ion Complex 341
 
  • B. Mustapha, J.L. Martinez Marin
    ANL, Lemont, Illinois, USA
  • Y.S. Derbenev, F. Lin, V.S. Morozov, Y. Zhang
    JLab, Newport News, Virginia, USA
  
  Funding: This work was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357 for ANL and by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177 and DE-AC02-06CH11357.
A recent assessment of the scientific merit for a future Electron Ion Collider (EIC) in the US, by the National Academy of Sciences, found that such a facility would be unique in the world and would answer science questions that are compelling, fundamental, and timely. This assessment confirmed the recommendations of the 2015 Nuclear Science Advisory Committee for an EIC with highly polarized beams of electrons and ions, sufficiently high luminosity and variable center-of-mass (CM) energy. The baseline design of Jefferson Lab Electron-Ion Collider (JLEIC) has been updated to 100 GeV CM energy, corresponding to 200 GeV proton energy. We here present a high-energy design for the JLEIC ion complex. It consists of a 135 MeV injector linac, a 6-GeV non figure-8 pre-booster ring and a 40-GeV large ion booster, which could also serve as electron storage ring (e-ring). The energy choice in the accelerator chain is beneficial for a future upgrade to 140 GeV CM energy. The large booster is designed with the same shape and size of the original e-ring allowing for the option of building separate electron and ion rings by stacking them in the same tunnel along with the ion collider ring. 		 
slides icon Slides TUZBA3 [5.435 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUZBA3  
About • paper received ※ 03 September 2019       paper accepted ※ 25 November 2019       issue date ※ 08 October 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUZBA4 Interaction Region Magnets for Future Electron-Ion Collider at Jefferson Lab 345
TUPLO13   use link to see paper's listing under its alternate paper code  
 
  • R. Rajput-Ghoshal, C. Hutton, F. Lin, T.J. Michalskipresenter, V.S. Morozov, M. Wiseman
    JLab, Newport News, Virginia, USA
  
  The Jefferson Lab Electron Ion Collider (JLEIC) is a proposed new machine for nuclear physics research. It uses the existing CEBAF accelerator as a full energy injector to deliver 3 to 12 GeV electrons into a new electron collider ring. An all new ion accelerator and collider complex will deliver up to 200 GeV protons. The machine has luminosity goals of 1034 cm-2 ses−1. The whole detector region including forward detection covers about 80 meters of the JLEIC complex. The interaction region design has recently been optimized to accommodate 200 GeV proton energy using conventional NbTi superconducting magnet technology. This paper will describe the requirements and preliminary designs for both the ion and electron beam magnets in the most complex 32 m long interaction region (IR) around the interaction point (IP). The interaction region has over thirty-seven superconducting magnets operating at 4.5K; these include dipoles, quadrupoles, skew-quadrupoles, solenoids, horizontal and vertical correctors and higher order multipole magnets. The paper will also discuss the electromagnetic interaction between these magnets.  
slides icon Slides TUZBA4 [6.444 MB]  
poster icon Poster TUZBA4 [1.549 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUZBA4  
About • paper received ※ 27 August 2019       paper accepted ※ 31 August 2019       issue date ※ 08 October 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUZBA5 Algorithms Used in Action and Phase Jump Analysis to Estimate Corrections to Quadrupole Errors in the Interaction Regions of the LHC 349
 
  • J.F. Cardona
    UNAL, Bogota D.C, Colombia
  
  Action and phase jump analysis has been used to estimate corrector strengths in the high luminosity interaction regions of the LHC. It has been proven that these corrections are effective to eliminate the beta-beating that is generated in those important regions and that propagates around the ring. More recently, it was also shown that the beta-beating at the interaction point can also be suppressed by combining k-modulation measurements with action and phase jump analysis. Applying this technique to the re-commissioning of the LHC in 2021 requires a good knowledge of the software developed for action and phase jump analysis over the years. In this paper a detailed description is made of all the modules that are part of this software and the corresponding algorithms.  
slides icon Slides TUZBA5 [0.431 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUZBA5  
About • paper received ※ 22 August 2019       paper accepted ※ 05 September 2019       issue date ※ 08 October 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUZBA6
 Computation of Magnetized Dynamic Friction Force Based on a Reduced Binary Interaction Model  
TUPLO14   use link to see paper's listing under its alternate paper code  
 
  • I.V. Pogorelov, D.T. Abell, D.L. Bruhwiler, Y.I. Eidelman, S.D. Webb
    RadiaSoft LLC, Boulder, Colorado, USA
  
  Funding: This work is supported by the U.S. DOE Office of Science, Office of Nuclear Physics, under Award Number DE-SC0015212.
Relativistic magnetized electron cooling is an essential technique for achieving the ion beam luminosity requirements of proposed electron-ion collider facilities. Because the cooling system will have to operate in previously untested parameter regimes, accurate computation of magnetized dynamic friction is required at the design stage. In particular, one has to include all relevant physics that might increase the cooling time, such as short interaction time in the cooler, space charge forces, field errors and complicated phase space distributions of imperfectly magnetized electron beams. We will present recent work on a new semi-analytic treatment of momentum transfer from an ion to a distribution of magnetized electrons, and discuss its application to calculation of dynamic friction in the parameter regime relevant to the JLEIC and eRHIC cooling system design. 		 
slides icon Slides TUZBA6 [2.751 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)