Paper | Title | Page |
---|---|---|
MOOHC2 | The US Electron Ion Collider Accelerator Designs | 1 |
|
||
With the completion of the National Academies of Sciences Assessment of a US Electron-Ion Collider, the prospects for construction of such a facility have taken a step forward. This paper provides an overview of the two site-specific EIC designs: JLEIC (Jefferson Lab) and eRHIC (BNL) as well as brief overview of ongoing EIC R&D. | ||
![]() |
Slides MOOHC2 [14.774 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOOHC2 | |
About • | paper received ※ 29 August 2019 paper accepted ※ 04 September 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
MOYBA3 |
JLEIC: A High Luminosity Polarized Electron-Ion Collider at Jefferson Lab | |
|
||
Funding: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177 and DE-AC02-06CH11357. The recent National Academies of Science Review concluded the science questions that could be answered by an electron-ion collider are significant to advancing our understanding of the atomic nuclei that make up all visible matter in the universe. To meet this science need, a high luminosity polarized electron-ion collider (JLEIC) was envisioned at Jefferson Lab, based on the existing CEBAF recirculated SRF electron linac. Over the past 16 years, Jefferson Lab has been actively engaged in the design study and accelerator R&D for JLEIC, a comprehensive Pre-Conceptual Design Report has been completed recently. The JLEIC baseline design has also been continuously optimized for achieving better performance and for reduction of technical risks. In this paper, we present a summary of the JLEIC baseline design and also briefly discuss the accelerator R&D. |
||
![]() |
Slides MOYBA3 [21.401 MB] | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUZBA3 | A High-Energy Design for JLEIC Ion Complex | 341 |
|
||
Funding: This work was supported by the U.S. DOE under Contract No. DE-AC02-06CH11357 for ANL and by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177 and DE-AC02-06CH11357. A recent assessment of the scientific merit for a future Electron Ion Collider (EIC) in the US, by the National Academy of Sciences, found that such a facility would be unique in the world and would answer science questions that are compelling, fundamental, and timely. This assessment confirmed the recommendations of the 2015 Nuclear Science Advisory Committee for an EIC with highly polarized beams of electrons and ions, sufficiently high luminosity and variable center-of-mass (CM) energy. The baseline design of Jefferson Lab Electron-Ion Collider (JLEIC) has been updated to 100 GeV CM energy, corresponding to 200 GeV proton energy. We here present a high-energy design for the JLEIC ion complex. It consists of a 135 MeV injector linac, a 6-GeV non figure-8 pre-booster ring and a 40-GeV large ion booster, which could also serve as electron storage ring (e-ring). The energy choice in the accelerator chain is beneficial for a future upgrade to 140 GeV CM energy. The large booster is designed with the same shape and size of the original e-ring allowing for the option of building separate electron and ion rings by stacking them in the same tunnel along with the ion collider ring. |
||
![]() |
Slides TUZBA3 [5.435 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUZBA3 | |
About • | paper received ※ 03 September 2019 paper accepted ※ 25 November 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPLM13 | Two-Energy Storage-Ring Electron Cooler for Relativistic Ion Beams | 399 |
SUPLM07 | use link to see paper's listing under its alternate paper code | |
|
||
An electron beam based cooling system for the ion beam is one of the commonly used approaches. The proposed two’energy storage-ring electron cooler consists of damping and cooling sections at markedly different energies connected by an energy recovering superconducting RF structure. The parameters in the cooling and damping sections are adjusted for optimum cooling of a stored ion beam and for optimum damping of the electron beam respectively. This paper briefly describes a two cavities model along with a third cavity model to accelerate and decelerate the electron beam in two energy storage ring. Based on our assumed value of equilibrium emittance shows that these models give a bunch length of the order of cm and energy spread of the order of 〖10〗-5 in the cooling section which are required parameters for the better cooling. Numerical calculations along with elegant simulation are presented. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLM13 | |
About • | paper received ※ 28 August 2019 paper accepted ※ 03 September 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPLO04 | The Latest Code Development Progress of JSPEC | 539 |
|
||
Funding: This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177. The JLab Simulation Package on Electron Cooling (JSPEC) is an open source software developed at Jefferson Lab for electron cooling and intrabeam scattering (IBS) simulations. IBS is an important factor that leads to the growth of the beam emittance and hence the reduction of the luminosity in a high density ion collider ring. Electron cooling is an effective measure to overcome the IBS effect. Although JSPEC is initiated to fulfill the simulation needs in JLab Electron Ion Collider project, it can be used as a general design tool for other accelerators. JSPEC provides various models of the ion beam and the electron beam and it calculates the expansion rate and simulates the evolution of the ion beam under the IBS and/or electron cooling effect. In this report, we will give a brief introduction of JSPEC and then present the latest code development progress of JSPEC, including new models, algorithms, and the user interface. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLO04 | |
About • | paper received ※ 20 September 2019 paper accepted ※ 19 November 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPLS11 | Simulation of Transparent Spin Experiment in RHIC | 789 |
|
||
Funding: Work supported by the U.S. DOE under Contracts No. DE-AC05-06OR23177 and DE-AC02-98CH10886. The transparent spin mode has been proposed as a new technique for preservation and control of the spin polari-zation of ion beams in a synchrotron. The ion rings of the proposed Jefferson Lab Electron-Ion Collider (JLEIC) adopted this technique in their figure-8 design. The transparent spin mode can also be setup in a racetrack with two identical Siberian snakes. There is a proposal to test the predicted features of the spin transparent mode in Relativistic Heavy Ion Collider (RHIC), which already has all of the necessary hardware capabilities. We have earlier analytically estimated the setup parameters and developed a preliminary experimental plan. In this paper we describe simulation setup and benchmarking for the proposed experiment using a Zgoubi model of RHIC. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-WEPLS11 | |
About • | paper received ※ 03 September 2019 paper accepted ※ 05 September 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPLS14 | A C++ TPSA/DA Library With Python Wrapper | 796 |
|
||
Funding: This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177. Truncated power series algebra (TPSA) or differential algebra (DA) is often used by accelerator physicists to generate a transfer map of a dynamic system. The map then can be used in dynamic analysis of the system or in particle tracking study. TPSA/DA can also be used in some fast algorithms, eg. the fast multipole method, for collective effect simulation. This paper reports a new TPSA/DA library written in C++. This library is developed based on Dr. Lingyun Yang’s TPSA code, which has been used in MAD-X and PTC. Compared with the original code, the updated version has the following changes: (1) The memory management has been revised to improve the efficiency; (2) A new data type of DA vector is defined and supported by most frequently used operators; (3) Support of inverse trigonometric functions and hyperbolic functions for the DA vector has been added; (4) function composition is revised for better efficiency; (5) a python wrapper is provided. The code is hosted at github and available to the public. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-WEPLS14 | |
About • | paper received ※ 20 September 2019 paper accepted ※ 16 November 2020 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |