NAPAC2019 - List of Authors (Gaowei, M.)

Paper	Title	Page
TUYBA5	New Methods of Synthesizing Ultra-Smooth and High Efficiency Alkali Antimonide Photocathodes for Future Light Sources
	M. Gaowei, J. Cen BNL, Upton, New York, USA
	High quantum yield, low emittance, long lifetime bi-alkali photocathode has been one of the most significant directions in the photocathode development in recent years. Among various studies effusion cell evaporation has been proven for high potential in achieving such requirements. In this paper we report the results of the study on both the 1 step and 2 step tenuary co-evaporation of cesium potassium antimonide (K-Cs-Sb) photocathodes from alkali effusion cells, with in situ and operando X-ray characterization techniques. We were able to achieve 1.2 nm of surface roughness from an 80 nm thick photocathode film, with high crystallinity and a quantum efficacy exceeds 30% at 360 nm wavelength and 5.8% at 530 nm wavelength.
	Slides TUYBA5 [5.209 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUZBA1	Commissioning of the Electron Accelerator LEReC for Bunched Beam Cooling	330
	D. Kayran, Z. Altinbas, D. Bruno, M.R. Costanzo, K.A. Drees, A.V. Fedotov, W. Fischer, M. Gaowei, D.M. Gassner, X. Gu, R.L. Hulsart, P. Inacker, J.P. Jamilkowski, Y.C. Jing, J. Kewisch, C.J. Liaw, C. Liu, J. Ma, K. Mernick, T.A. Miller, M.G. Minty, L.K. Nguyen, M.C. Paniccia, I. Pinayev, V. Ptitsyn, V. Schoefer, S. Seletskiy, F. Severino, T.C. Shrey, L. Smart, K.S. Smith, A. Sukhanov, P. Thieberger, J.E. Tuozzolo, E. Wang, G. Wang, W. Xu, A. Zaltsman, H. Zhao, Z. Zhao BNL, Upton, New York, USA
	Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The brand-new state of the art electron accelerator, LEReC, was built and commissioned at BNL. LEReC accelerator includes a photocathode DC gun, a laser system, a photocathode delivery system, magnets, beam diagnostics, a SRF booster cavity, and a set of Normal Conducting RF cavities to provide sufficient flexibility to tune the beam in the longitudinal phase space. Electron beam quality suitable for cooling in the Relativistic Heavy Ion Collider (RHIC) was achieved [1], which lead to the first demonstration of bunched beam electron cooling of hadron beams [2]. This presentation will discuss commissioning results, achieved beam parameters and performance of the LEReC systems. [1] D.Kayran et al., First results from Commissioning of LEReC, in Proc of IPAC2019 [2] A.Fedotov et al., First electron cooling of hadron beams using a bunched electron beam, presented at NAPAC2019
	Slides TUZBA1 [18.343 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUZBA1
About •	paper received ※ 27 August 2019 paper accepted ※ 31 August 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THZBA5	First Electron Cooling of Hadron Beams Using a Bunched Electron Beam	957
	A.V. Fedotov, Z. Altinbas, M. Blaskiewicz, J.M. Brennan, D. Bruno, J.C. Brutus, M.R. Costanzo, K.A. Drees, W. Fischer, J.M. Fite, M. Gaowei, D.M. Gassner, X. Gu, J. Halinski, K. Hamdi, L.R. Hammons, T. Hayes, R.L. Hulsart, P. Inacker, J.P. Jamilkowski, Y.C. Jing, P.K. Kankiya, D. Kayran, J. Kewisch, D. Lehn, C.J. Liaw, C. Liu, J. Ma, G.J. Mahler, M. Mapes, A. Marusic, K. Mernick, C. Mi, R.J. Michnoff, T.A. Miller, M.G. Minty, S.K. Nayak, L.K. Nguyen, M.C. Paniccia, I. Pinayev, S. Polizzo, V. Ptitsyn, T. Rao, G. Robert-Demolaize, T. Roser, J. Sandberg, V. Schoefer, S. Seletskiy, F. Severino, T.C. Shrey, L. Smart, K.S. Smith, H. Song, A. Sukhanov, R. Than, P. Thieberger, S.M. Trabocchi, J.E. Tuozzolo, P. Wanderer, E. Wang, G. Wang, D. Weiss, B.P. Xiao, T. Xin, W. Xu, A. Zaltsman, H. Zhao, Z. Zhao BNL, Upton, New York, USA
	Funding: Work supported by the U.S. Department of Energy. The Low Energy RHIC electron Cooler (LEReC) was recently constructed and commissioned at BNL. The LEReC is the first electron cooler based on the RF acceleration of electron bunches (previous electron coolers all used DC beams). Bunched electron beams are necessary for cooling hadron beams at high energies. The challenges of such an approach include generation of electron beams suitable for cooling, delivery of electron beams of the required quality to the cooling sections without degradation of beam emittances and energy spread, achieving required small angles between electrons and ions in the cooling sections, precise energy matching between the two beams, high-current operation of the electron accelerator, as well as several physics effects related to bunched beam cooling. Following successful commissioning of the electron accelerator in 2018, the focus of the LEReC project in 2019 was on establishing electron-ion interactions and demonstration of cooling process using electron energy of 1.6MeV (ion energy of 3.85GeV/n), which is the lowest energy of interest. Here we report on the first demonstration of Au ion cooling in RHIC using this new approach.
	Slides THZBA5 [16.417 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-THZBA5
About •	paper received ※ 16 August 2019 paper accepted ※ 31 August 2019 issue date ※ 08 October 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TUYBA5

New Methods of Synthesizing Ultra-Smooth and High Efficiency Alkali Antimonide Photocathodes for Future Light Sources

M. Gaowei, J. Cen
BNL, Upton, New York, USA

High quantum yield, low emittance, long lifetime bi-alkali photocathode has been one of the most significant directions in the photocathode development in recent years. Among various studies effusion cell evaporation has been proven for high potential in achieving such requirements. In this paper we report the results of the study on both the 1 step and 2 step tenuary co-evaporation of cesium potassium antimonide (K-Cs-Sb) photocathodes from alkali effusion cells, with in situ and operando X-ray characterization techniques. We were able to achieve 1.2 nm of surface roughness from an 80 nm thick photocathode film, with high crystallinity and a quantum efficacy exceeds 30% at 360 nm wavelength and 5.8% at 530 nm wavelength.

Slides TUYBA5 [5.209 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUZBA1

Commissioning of the Electron Accelerator LEReC for Bunched Beam Cooling

330

D. Kayran, Z. Altinbas, D. Bruno, M.R. Costanzo, K.A. Drees, A.V. Fedotov, W. Fischer, M. Gaowei, D.M. Gassner, X. Gu, R.L. Hulsart, P. Inacker, J.P. Jamilkowski, Y.C. Jing, J. Kewisch, C.J. Liaw, C. Liu, J. Ma, K. Mernick, T.A. Miller, M.G. Minty, L.K. Nguyen, M.C. Paniccia, I. Pinayev, V. Ptitsyn, V. Schoefer, S. Seletskiy, F. Severino, T.C. Shrey, L. Smart, K.S. Smith, A. Sukhanov, P. Thieberger, J.E. Tuozzolo, E. Wang, G. Wang, W. Xu, A. Zaltsman, H. Zhao, Z. Zhao
BNL, Upton, New York, USA

Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy.
The brand-new state of the art electron accelerator, LEReC, was built and commissioned at BNL. LEReC accelerator includes a photocathode DC gun, a laser system, a photocathode delivery system, magnets, beam diagnostics, a SRF booster cavity, and a set of Normal Conducting RF cavities to provide sufficient flexibility to tune the beam in the longitudinal phase space. Electron beam quality suitable for cooling in the Relativistic Heavy Ion Collider (RHIC) was achieved [1], which lead to the first demonstration of bunched beam electron cooling of hadron beams [2]. This presentation will discuss commissioning results, achieved beam parameters and performance of the LEReC systems.
[1] D.Kayran et al., First results from Commissioning of LEReC, in Proc of IPAC2019
[2] A.Fedotov et al., First electron cooling of hadron beams using a bunched electron beam, presented at NAPAC2019

Slides TUZBA1 [18.343 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUZBA1

About •

paper received ※ 27 August 2019 paper accepted ※ 31 August 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THZBA5

First Electron Cooling of Hadron Beams Using a Bunched Electron Beam

957

A.V. Fedotov, Z. Altinbas, M. Blaskiewicz, J.M. Brennan, D. Bruno, J.C. Brutus, M.R. Costanzo, K.A. Drees, W. Fischer, J.M. Fite, M. Gaowei, D.M. Gassner, X. Gu, J. Halinski, K. Hamdi, L.R. Hammons, T. Hayes, R.L. Hulsart, P. Inacker, J.P. Jamilkowski, Y.C. Jing, P.K. Kankiya, D. Kayran, J. Kewisch, D. Lehn, C.J. Liaw, C. Liu, J. Ma, G.J. Mahler, M. Mapes, A. Marusic, K. Mernick, C. Mi, R.J. Michnoff, T.A. Miller, M.G. Minty, S.K. Nayak, L.K. Nguyen, M.C. Paniccia, I. Pinayev, S. Polizzo, V. Ptitsyn, T. Rao, G. Robert-Demolaize, T. Roser, J. Sandberg, V. Schoefer, S. Seletskiy, F. Severino, T.C. Shrey, L. Smart, K.S. Smith, H. Song, A. Sukhanov, R. Than, P. Thieberger, S.M. Trabocchi, J.E. Tuozzolo, P. Wanderer, E. Wang, G. Wang, D. Weiss, B.P. Xiao, T. Xin, W. Xu, A. Zaltsman, H. Zhao, Z. Zhao
BNL, Upton, New York, USA

Funding: Work supported by the U.S. Department of Energy.
The Low Energy RHIC electron Cooler (LEReC) was recently constructed and commissioned at BNL. The LEReC is the first electron cooler based on the RF acceleration of electron bunches (previous electron coolers all used DC beams). Bunched electron beams are necessary for cooling hadron beams at high energies. The challenges of such an approach include generation of electron beams suitable for cooling, delivery of electron beams of the required quality to the cooling sections without degradation of beam emittances and energy spread, achieving required small angles between electrons and ions in the cooling sections, precise energy matching between the two beams, high-current operation of the electron accelerator, as well as several physics effects related to bunched beam cooling. Following successful commissioning of the electron accelerator in 2018, the focus of the LEReC project in 2019 was on establishing electron-ion interactions and demonstration of cooling process using electron energy of 1.6MeV (ion energy of 3.85GeV/n), which is the lowest energy of interest. Here we report on the first demonstration of Au ion cooling in RHIC using this new approach.

Slides THZBA5 [16.417 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-THZBA5

About •

paper received ※ 16 August 2019 paper accepted ※ 31 August 2019 issue date ※ 08 October 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)